1. Introduction
The Juson Audio JTA50 is a high-fidelity hybrid stereo tube amplifier designed to deliver a rich and natural sonic experience. Combining the authentic warmth and character of vacuum tubes with the efficiency of a Class A/B amplifier, the JTA50 offers versatile connectivity options and powerful audio performance for your home acoustic system. It features a modern design with vintage-inspired VU meters and comes with a convenient remote control for ease of use.

2. Safety Information
- Always ensure the amplifier is connected to a power outlet with the correct voltage (110V or 220V) as selected on the rear panel. Incorrect voltage can damage the unit.
- Do not expose the amplifier to water, moisture, or excessive heat.
- Ensure adequate ventilation around the unit to prevent overheating. The built-in cooling fan helps maintain optimal operating temperature.
- Vacuum tubes can become very hot during operation. Avoid touching them directly. Allow the unit to cool down before handling or replacing tubes.
- Do not open the amplifier casing. Refer all servicing to qualified personnel.
3. Package Contents
Please check the package for the following items:
- 1 x Juson Audio JTA50 Hybrid Stereo Tube Amplifier
- 1 x Remote Control
- 1 x AC Power Cable
- 1 x User Manual

4. Product Overview
4.1 Front Panel

- IR (Infrared Receiver): For remote control signals.
- Power Switch / Power Indicator: Turns the unit on/off and indicates power status.
- VU Meter: Displays audio output levels for left and right channels.
- Bass Control: Adjusts low-frequency output.
- Treble Control: Adjusts high-frequency output.
- 1/4" TRS Headphone Output: For connecting headphones.
- Source Input Selector: Buttons for PHONO, AUX, BT (Bluetooth), OPT (Optical), COAX (Coaxial), PC-USB.
- Volume Control: Adjusts the overall output volume.
4.2 Rear Panel

- Bluetooth Antenna: For wireless Bluetooth connectivity.
- Ground Terminal (GND): For connecting turntable ground wire.
- Active Subwoofer Output (SW OUT): RCA output for connecting an active subwoofer.
- Digital Optical Input (OPT): For digital audio sources.
- PC-USB Input: For connecting to a computer.
- Digital Coaxial Input (COAX): For digital audio sources.
- Line Level AUX RCA Input (AUX): For analog audio sources.
- Phono RCA Input (PHONO): For connecting turntables.
- Passive Speaker Output (SPEAKER OUTPUT): Binding posts for passive speakers.
- AC110V or AC220V Voltage Selector Switch: Selects the appropriate input voltage.
- Noiseless Cooling Fan: Helps dissipate heat.
- AC Power Input: For connecting the AC power cable.
5. Setup Instructions
Before connecting any devices, ensure the amplifier is powered off and unplugged from the wall outlet.
5.1 Power Connection
- Verify the AC110V or AC220V Voltage Selector Switch on the rear panel is set to match your local power supply.
- Connect the provided AC Power Cable to the AC Power Input on the rear panel of the amplifier.
- Plug the other end of the AC power cable into a suitable wall outlet.
5.2 Speaker Connection
Connect your passive speakers to the Passive Speaker Output binding posts on the rear panel.
- Ensure correct polarity: connect the positive (+) terminal of the amplifier to the positive (+) terminal of the speaker, and the negative (-) terminal of the amplifier to the negative (-) terminal of the speaker.
- The amplifier supports speakers with a minimum impedance of 4 ohms.
5.3 Input Connections
The JTA50 offers a variety of inputs to connect your audio sources:
- Turntable (PHONO):
- Ensure your turntable is set to phono output signal. If your turntable outputs a line-level signal, connect it to the AUX input instead.
- Connect the turntable's RCA outputs to the Phono RCA Input (PHONO) on the amplifier.
- Connect the ground wire from your turntable to the Ground Terminal (GND) on the rear of the amplifier.
- Analog Devices (AUX RCA): Connect devices like CD players, tuners, or other line-level audio sources to the Line Level AUX RCA Input (AUX).
- Digital Devices (Optical/Coaxial): Connect digital audio sources such as TVs, DVD players, or computers to the Digital Optical Input (OPT) or Digital Coaxial Input (COAX).
- Computer (PC-USB): Connect your computer to the PC-USB Input using a USB cable.
- Bluetooth: Ensure the Bluetooth Antenna is securely connected to the rear panel.
5.4 Subwoofer Output
For a 2.1 channel setup, connect an active subwoofer to the Active Subwoofer Output (SW OUT) RCA jack on the rear panel. The JTA50 provides a full-range preout for the subwoofer with no internal crossover.
5.5 Headphone Connection
Plug your 6.35mm headphones into the 1/4" TRS Headphone Output jack on the front panel for private listening.

6. Operating Instructions
6.1 Power On/Off
Press the Power Switch button on the front panel to turn the amplifier on or off. The power indicator will illuminate when the unit is on.
6.2 Input Selection
Press the corresponding Source Input Selector button (PHONO, AUX, BT, OPT, COAX, PC-USB) on the front panel to choose your desired audio source. The selected input's indicator light will illuminate.
6.3 Volume Control
Rotate the Volume Control knob on the front panel clockwise to increase volume and counter-clockwise to decrease it. You can also use the VOL+ and VOL- buttons on the remote control.
6.4 Tone Control
Adjust the Bass Control and Treble Control knobs on the front panel to fine-tune the low and high frequencies to your preference.
6.5 Bluetooth Pairing
- Select the 'BT' input using the source selector button.
- On your Bluetooth device (smartphone, tablet, etc.), search for available Bluetooth devices.
- Select 'JTA50' from the list to pair. Once paired, the Bluetooth indicator will stabilize.
6.6 Remote Control Usage
The included remote control allows for convenient operation from a distance. Functions include input selection (PHONO, AUX, USB, COAX, OPT, BT), volume control (VOL+, VOL-), mute, and playback controls (play/pause, next/previous track).

7. Maintenance
7.1 Cleaning
Use a soft, dry cloth to clean the exterior of the amplifier. Do not use liquid cleaners, aerosols, or solvents, as these may damage the finish or internal components.
7.2 Tube Care
The vacuum tubes are delicate and can get hot during operation. Allow the amplifier to cool down completely before attempting to clean around the tubes or replace them. Handle tubes carefully by their bases to avoid damage.
8. Troubleshooting
- No Sound:
- Check if the amplifier is powered on.
- Verify all audio cables are securely connected to both the amplifier and the source device.
- Ensure the correct input source is selected on the amplifier.
- Check the volume level on both the amplifier and the source device.
- If using headphones, ensure they are fully plugged in.
- VU Meters Stop Flickering with Headphones: This is normal behavior. The VU meters are designed to show the audio output level of the left and right channels for speaker output. When headphones are plugged in, the VU meter only recognizes one way output based on the current design and will stop flickering. This is not a defect.
- No Bluetooth Connection:
- Ensure the 'BT' input is selected on the amplifier.
- Make sure the Bluetooth antenna is securely attached to the rear panel.
- Ensure your Bluetooth device is in pairing mode and within range.
- Try unpairing and re-pairing the device.
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | JUSON AUDIO |
| Model Number | JTA50 |
| Channels | 3 (2.1) |
| Power Output | 65WPC RMS @ 4 ohms (65 watts RMS x 2 into 4 ohms) |
| Maximum Power Per Channel | 65W |
| THD | 1% @ 65WPC |
| Minimum Speaker Impedance | 4 ohms |
| Channel Separation | 50dB |
| Frequency Response | 20-20,000Hz |
| Sub Output | Preout for active subwoofer (JTA50 is a full range amp with no internal crossover) |
| Bluetooth | Version 5 supports SBC and AAC codecs |
| Media Playback File Support | FLAC, WAV, APE, WMA, MP3 |
| Digital Audio DAC Sample Rate | Up to 16-bit/48kHz |
| Digital Audio DAC SNR | 96 dB |
| Input Impedance | 47 kohms (minimum) |
| Input Sensitivity | 350 mV |
| Preamplifier Tube | 2*6J9 + 2*10DX8 (Note: Some units may use 6F1*2 + WY-2*2, sound quality is identical) |
| Transistors | Toshiba A1941 x 2, Toshiba C5198 x 2 |
| Inputs | Optical, Coaxial, Bluetooth 5.0, 2x Stereo RCA, USB |
| Output | Speaker, Subwoofer, Headphone |
| Power | 110/220 VAC, 50/60 Hz Standard IEC Connection |
| Dimensions | 271x286x166mm (10.7 x 11.3 x 6.5 inches) |
| Fuse Rating (120V) | 5x20mm 5AL |
| Package | Yes |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |


10. Warranty and Support
10.1 Warranty Policy
Juson Audio ensures product quality through rigorous inspection. The JTA50 amplifier comes with a 24-month free repair service from the date of receipt. This warranty excludes man-made damage and/or misuse. For vacuum tubes, a 3-month warranty applies.
- Defective units must be reported with supporting photos, videos, or other evidence and returned within the warranty period.
- You will need to submit a tracking number and the PO number after arranging returns with original packaging.
- After the warranty period expires, Juson Audio teams are available to offer technical support online to assist with product repair.
10.2 Returns
You have 7 days to contact Juson Audio and 15 days to return the product from the date it was received for a refund or replacement. If the item is in your possession for more than 7 days, it is considered used, and a refund or replacement may not be issued. After 15 days, the 24-month warranty policy will apply.
10.3 Technical Support
Juson Audio is committed to providing excellent after-sales service. Please feel free to contact us for any technical support or inquiries. Our team aims to make the sound better and will focus on audio always.
11. User Tips
- Connecting a PS5: A PS5 console can be connected through the USB audio connector if the PS5 supports USB audio output.
- Multiple Source Connection: You can connect a CD player and a record player at the same time by utilizing different inputs. For example, connect the CD player to the AUX input and the record player to the PHONO input.
- Tube Variations: The JTA50 may come with different tube solutions (e.g., 6J9*2pcs+10DX8*2pcs or 6F1*2+WY-2*2). Regardless of the specific tubes, the sound quality is designed to be the same.