Wiha 42 Piece 40in1 ESD Micro Precision Screwdriver & Bit Set

Contents

Wiha 'Zai Hause' 42 Piece 40in1 ESD Micro Precision Screwdriver & Bit Set Instruction Manual

Model: 42 Piece 40in1 ESD Micro Precision Screwdriver & Bit Set

Introduction

The Wiha 'Zai Hause' 42 Piece 40in1 ESD Micro Precision Screwdriver & Bit Set is a versatile tool kit designed for intricate and delicate tasks. This set provides a comprehensive range of precision bits and an ergonomic handle, making it ideal for working with small electronics, models, and other precision equipment. The electrostatic dissipative (ESD) handle ensures safe handling of sensitive electronic components.

Wiha 'Zai Hause' 42 Piece 40in1 ESD Micro Precision Screwdriver & Bit Set, case open showing bits and handle

Image: The Wiha 'Zai Hause' 42 Piece 40in1 ESD Micro Precision Screwdriver & Bit Set with its case open, displaying the array of precision bits and the yellow and black screwdriver handle.

Setup and Assembly

This section guides you through setting up your Wiha 'Zai Hause' Micro Precision Screwdriver and Bit Set for use:

  1. Open the Case: The set comes in a compact and sturdy storage box with an integrated magnetic lock. To open, gently pull the two halves of the case apart. The folding mechanism will reveal the organized array of bits and the screwdriver handle.
  2. Retrieve the Handle: Locate the yellow and black Wiha screwdriver handle in the center of the case and remove it.
  3. Select a Bit: Identify the required bit type and size from the clearly labeled slots. The bits are held securely but can be easily removed by gently pulling them out.
  4. Insert the Bit: Insert the selected bit into the magnetic bit holder at the tip of the screwdriver handle. The magnetic holder will secure the bit firmly in place, allowing for quick and tool-free bit changes.

For a visual demonstration of opening the case and inserting bits, please refer to the video below:

Video: Demonstration of opening the screwdriver bit set case and inserting a bit into the handle.

Operating Instructions

The Wiha 'Zai Hause' Micro Precision Screwdriver is designed for precise and delicate work. Follow these instructions for optimal use:

  1. Choose the Correct Bit: Always select the bit that perfectly matches the screw head to prevent damage to both the screw and the bit. Refer to the "Specifications" section for a list of included bit types.
  2. Secure the Bit: Ensure the chosen bit is fully inserted and securely held by the magnetic bit holder in the screwdriver handle.
  3. Apply Gentle Pressure: For micro-screws, apply steady, gentle pressure while turning. The ergonomic handle design and quick-turn zone facilitate precise control, especially for sensitive parts.
  4. ESD Protection: The high-quality electrostatic dissipative (ESD) handle protects against discharge, offering maximum safety when working with sensitive electronic equipment like smartphones, laptops, and circuit boards.
  5. Versatile Applications: This set is particularly suitable for electronic devices, precision instruments, and small screws. It includes specialized bits for mainstream mobile phones and game consoles.
Hand using Wiha ESD screwdriver on a circuit board
Image: Hand using the Wiha ESD screwdriver to work on a circuit board, highlighting its precision and ESD safety.
Hand using Wiha screwdriver on a camera
Image: Hand using the Wiha screwdriver on a camera, demonstrating its suitability for delicate electronic devices.
Hand using Wiha screwdriver on a graphics card
Image: Hand using the Wiha screwdriver on a graphics card, illustrating its application in computer component repair.

Maintenance

Proper maintenance ensures the longevity and performance of your Wiha 'Zai Hause' Micro Precision Screwdriver and Bit Set:

  • Cleaning: After each use, wipe the screwdriver handle and bits with a clean, dry cloth to remove any dirt, oil, or debris. Avoid using harsh chemicals or abrasive materials that could damage the tools or the ESD coating.
  • Storage: Always store the bits and handle back in their designated slots within the compact storage case. The magnetic lock will keep the case securely closed, preventing loss and damage. Proper storage protects the bits from corrosion and keeps them organized.
  • Inspection: Periodically inspect the bits for any signs of wear, bending, or damage. Replace any worn or damaged bits to maintain precision and prevent stripping screws.
  • Handle Care: The ESD handle should be kept clean and free from contaminants to ensure its electrostatic dissipative properties remain effective.

Troubleshooting

If you encounter any issues while using your Wiha 'Zai Hause' Micro Precision Screwdriver and Bit Set, consider the following:

  • Bit Not Fitting Screw:
    • Ensure you have selected the correct bit type and size for the screw. Even slight differences can cause improper fit.
    • Check if the screw head is stripped or damaged. If so, specialized screw extraction tools may be required.
  • Bit Slipping or Stripping Screw:
    • Verify that the bit is fully seated in the screw head.
    • Apply firm, consistent downward pressure while turning. Too little pressure can cause the bit to cam out.
    • The bit might be worn. Replace it with a new one if it appears damaged.
  • Bits Falling Out of Handle:
    • Ensure the bit is fully inserted into the magnetic bit holder.
    • Check if the magnetic holder is clean and free of debris that might obstruct the bit's seating.
  • Case Not Closing Securely:
    • Ensure all bits and the handle are correctly placed in their designated slots.
    • Check for any foreign objects preventing the case from closing properly.

Specifications

Detailed specifications for the Wiha 'Zai Hause' 42 Piece 40in1 ESD Micro Precision Screwdriver & Bit Set:

  • Product Name: Wiha 'Zai Hause' 42 Piece 40in1 ESD Micro Precision Screwdriver & Bit Set
  • Brand: Wiha
  • Origin: Mainland China
  • Set Contents: 42 pieces total (1 screwdriver handle, 40 micro bits, 1 SIM card ejector, 1 PH with pin for iPhone Standoffs).
  • Handle: High-quality electrostatic dissipative (ESD) handle with ergonomic design and quick-turn zone.
  • Bit Holder: Magnetic for easy and tool-free bit changes.
  • Storage: Compact and sturdy case with integrated magnetic lock and clear labeling for organization.

Included Bit Types and Sizes:

Bit TypeSizes IncludedQuantity
PhillipsPH000, PH00, PH0, PH1, PH25
Slotted1, 1.5, 2, 34
Hexagonal1.5, 2, 2.5, 34
TORX®T2, T3, T4, T54
TORX® with boreTR6, TR7, TR8, TR9, TR10, TR156
Pentalob (5-star profile)P2, P3, P4, P54
Sockets (nuts)2, 2.52
Square1, 22
Y-type (tri-point)Y000, Y00, Y0, Y14
Triangle2, 2.62
TensionerU2.61
SIM card ejectorN/A1
PH with pin (iPhone Standoff)N/A1

Image: A visual representation of the bit types and sizes included in the set.

Close-up of the Wiha screwdriver bit set showing various bit types and sizes

Warranty and Support

Wiha products are known for their quality and durability. For specific warranty information, please refer to the official Wiha documentation or contact the seller.

  • Free Returns: This product may be eligible for free returns within 90 days. Please check the purchase platform for details on eligibility and process.
  • Security & Privacy: Your personal details are protected, and payments are secure. For more information, refer to the platform's security and privacy policies.
  • Customer Support: For any questions, concerns, or technical assistance regarding your Wiha 'Zai Hause' Micro Precision Screwdriver and Bit Set, please contact the seller or Wiha customer service through their official channels.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.