1. Introduction
The Flipsky Anti Spark Switch Smart Enhanced 300A 20S is a high-performance electronic switch designed to prevent damaging electrical sparks when connecting batteries to high-power electronic speed controllers (ESCs) in applications such as electric skateboards, ebikes, scooters, and robots. This smart switch features advanced functionalities including roll-to-start, automatic turn-off after inactivity, and support for both 12mm and 16mm LED buttons.
2. Safety Information
⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
Always ensure proper insulation and secure connections to prevent short circuits. Handle high-voltage components with extreme care. Disconnect the battery before performing any maintenance or modifications.
3. Specifications
| Feature | Specification |
|---|---|
| Hardware Version | V2.0 |
| Voltage Range | 12V-84V (3-20S) |
| Continuous Current | 100A |
| Maximum Current | 160A |
| MOS Model | HYG015N10NS1TA |
| LED Button Diameter Options | 12mm / 16mm |
The metal shell design enhances heat dissipation, contributing to a longer product lifespan.
4. Package Contents
Please check the package for the following items:
- 1x Flipsky Anti Spark Switch Smart Enhanced V2.0
- 1x SM2.54 Connector Wire (for slide turn-on support)
- 1x LED Button (12mm or 16mm diameter, depending on selection)
- 2x Pairs of XT90 Connectors
- 4x Heat Shrink Sleeves
5. Installation and Setup
Follow these steps to properly install and connect your Anti Spark Switch:
5.1. Smart Anti-spark Switch Assembly
- Prepare Connectors: Gather the provided XT90 connectors (2 pairs) and heat shrink sleeves (4 pcs).
- Solder XT90 Connectors: Carefully solder the XT90 connectors to the main power wires (IN+ / IN- and OUT+ / OUT-) of the anti-spark switch. Ensure correct polarity (red for positive, black for negative).
- Insulate Connections: Slide the heat shrink sleeves over the soldered connections and use a heat source (e.g., lighter, heat gun) to shrink them, providing secure insulation.
Visual guide for XT90 connector assembly:
This video segment demonstrates the soldering and insulation process for the XT90 connectors.
5.2. Smart Anti-spark Switch Connection
- Connect SM2.54 Wire: Solder the SM2.54 connector wire (red wire) to one of the motor phase wires (A, B, or C) of your ESC. This connection enables the slide turn-on feature.
- Connect Main Power:
- Connect the IN side of the anti-spark switch to your battery.
- Connect the OUT side of the anti-spark switch to your ESC.
ATTENTION: OUT side connects with ESC, IN side connects with battery.
- Connect LED Button: Plug the LED button (12mm or 16mm diameter) into the designated port on the anti-spark switch.
- Smart Function Toggle: The switch has an ON/OFF toggle. Keep it in the ON position to enable smart functions (slide turn-on, auto turn-off). If you do not need the smart version features, you can keep the switch in the OFF position.
Wiring Diagram:

This diagram illustrates the correct wiring connections for the anti-spark switch within an electric skateboard system.
Visual guide for switch connection:
This video segment demonstrates the connection of the SM2.54 wire, main power, and LED button, along with the smart function toggle.
6. Operating Instructions
The Flipsky Anti Spark Switch offers both manual and smart operating modes:
6.1. Manual Operation (Smart Function Toggle OFF)
- Turn On: Press and hold the LED button for approximately 0.3 seconds.
- Turn Off: Press and hold the LED button for approximately 1 second.
- Cycle On/Off: Press and hold the button to cycle the power on and then off.
6.2. Smart Operation (Smart Function Toggle ON)
- Roll to Start: Simply push your electric skateboard (or other application) to initiate movement, and the switch will automatically turn on.
- Auto Turn-off: The device will automatically power off after 5 minutes of inactivity (no movement detected).
- Manual Override: The LED button can still be used for manual turn-on/off as described in Manual Operation, even when smart mode is enabled.
Demonstration of Roll-to-Start and Auto Turn-off:
This video segment showcases the roll-to-start functionality and the automatic turn-off feature after a period of inactivity.
7. Maintenance
- Regular Inspection: Periodically check all wiring and connections for any signs of wear, damage, or loose contacts.
- Cleanliness: Keep the anti-spark switch and surrounding components free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
- Heat Management: Ensure adequate airflow around the switch, especially during high-current operation, to prevent overheating. The metal casing aids in heat dissipation.
- Storage: When not in use for extended periods, store the device in a dry, cool environment.
8. Troubleshooting
- Device Not Turning On:
- Check all power connections (battery to IN, OUT to ESC) for secure contact and correct polarity.
- Ensure the battery is adequately charged and within the specified voltage range (12V-84V).
- Verify the LED button is correctly connected and functioning.
- If using smart mode, ensure the toggle switch is in the 'ON' position.
- Device Not Turning Off:
- If in smart mode, ensure there is no movement or vibration preventing auto turn-off.
- Attempt manual turn-off by pressing and holding the LED button for 1 second.
- Excessive Heat:
- Check for short circuits in the system.
- Ensure the continuous current draw does not exceed 100A.
- Verify proper ventilation around the switch.
9. User Tips
- Secure Connections: Always double-check all soldered and plugged connections to prevent intermittent power issues or damage from vibrations.
- Smart Mode Convenience: Utilize the smart mode for a seamless user experience with roll-to-start and automatic power management.
- Button Choice: Select the 12mm or 16mm LED button based on your enclosure's requirements for a clean and functional setup.
10. Warranty and Support
For warranty information, technical support, or any inquiries regarding your Flipsky Anti Spark Switch, please contact the manufacturer or your point of purchase. Ensure you retain your purchase records for warranty claims.