RxZoA HW-401-106LED

Contents

RxZoA HW-401-106LED Super Bright LED Outdoor Solar Light

Instruction Manual

1. Introduction

Thank you for purchasing the RxZoA HW-401-106LED Super Bright LED Outdoor Solar Light. This product is designed to provide efficient and reliable outdoor lighting with its advanced motion sensor, remote control capabilities, and durable waterproof design. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your solar light.

RxZoA Super Bright LED Outdoor Solar Light with Motion Sensor and Remote Control

Figure 1: RxZoA Super Bright LED Outdoor Solar Light with Motion Sensor and Remote Control

2. Safety Information

  • Ensure the solar panel is installed in a location that receives direct sunlight for at least 5 hours daily for optimal charging.
  • Do not install the solar light near other strong light sources at night, as this may interfere with the automatic light sensor function.
  • Avoid hitting the solar panel with hard or sharp objects to prevent damage.
  • Keep the product away from open flames or extreme heat sources.
  • This product contains a Lithium battery. Dispose of it responsibly according to local regulations.

3. Package Contents

Please check the package to ensure all items are present:

  • LED Lamp Unit with Motion Sensor
  • Solar Panel with 16.4ft (5m) Detachable Cable
  • Remote Control (for models with remote control)
  • Mounting Brackets (2 pieces)
  • Screws (4 pieces)
  • Wall Anchors (4 pieces)
Included parts: solar panel, LED light, mounting brackets, screws, wall anchors

Figure 2: Package Contents and Dimensions

4. Specifications

Feature Specification
Model Number HW-401-106LED
Light Source 106 LED bulbs (2835*106LED)
Solar Panel 5.5V 1.5W Polysilicon
Battery 18650/1800MA Lithium battery
Wire Length 5 meters (16.4 ft)
Material ABS + PC
Color Temperature 6500K (Cool White)
Protection Level IP65 Waterproof
Charging Time 4-6 hours (direct sunlight)
Luminous Time 10-12 hours (after full charge)
Light Range Approx. 25 square meters
Motion Sensor Angle 120°
Motion Sensor Distance 3-5 meters (10-26 ft)
Rotatable Head 135° (light unit)
Installation Method Assembly
Voltage 5V

5. Setup & Installation

5.1 Initial Charging

Upon receiving the product, ensure the protective film on the solar panel is removed. Place the solar panel in direct sunlight for more than 5 hours to allow the internal battery to fully charge before first use. Long-distance transportation in dark environments may deplete the power.

5.2 Choosing an Installation Location

  • **Solar Panel Placement:** Select a location that receives maximum direct sunlight throughout the day. The solar panel is separated from the light unit by a 16.4ft (5m) cable, allowing flexible placement. For optimal charging efficiency, consider a south-facing direction with a 30-degree tilt.
  • **Light Unit Placement:** The light unit can be installed anywhere you need illumination. The ideal mounting height is between 1.8 to 2.5 meters (approximately 6 to 8 feet) for effective motion detection and light coverage. Avoid installing the light unit near other strong light sources (e.g., streetlights) at night, as this can prevent the solar light from activating automatically.
Separate solar panel installation showing charging during the day and lighting at night

Figure 3: Separate Solar Panel Installation for Optimal Charging

Comparison of separate vs integrated solar light designs

Figure 4: Advantage of Separate Design for Unblocked Sunlight

5.3 Mounting Instructions

  1. **Mark Drill Points:** Hold the mounting bracket against the wall at your desired installation height. Use a pencil to mark the positions for the two screw holes.
  2. **Drill Holes:** Use a drill to create holes at the marked positions.
  3. **Insert Wall Anchors:** Gently tap the plastic wall anchors into the drilled holes using a hammer.
  4. **Secure Bracket:** Align the mounting bracket with the wall anchors and secure it with the provided screws using a screwdriver.
  5. **Attach Light Unit:** Slide the LED light unit onto the secured mounting bracket.
  6. **Connect Solar Panel:** Connect the detachable cable from the solar panel to the light unit. Ensure the connection is secure and waterproof.

Video 1: Product overview and installation guide.

6. Operating Instructions

6.1 Automatic Operation

The solar light is designed to charge during the day and automatically turn on at night. It features a motion detection function to enhance security and energy efficiency.

Day and night operation of the solar light

Figure 5: Solar Light Day/Night Functionality

6.2 Lighting Modes

The light offers four distinct operating modes, which can be cycled through using the button switch on the light unit or the remote control (if applicable). Each press of the button or remote command will switch to the next mode:

  1. **Mode 1: Dim Light Mode**
    At night, the light automatically turns on at 50% brightness and stays on continuously. It does not respond to motion. The light automatically extinguishes at dawn.
  2. **Mode 2: Dim Light + Motion Sensor Mode**
    At night, the light stays on at 20% brightness. When motion is detected within 3-5 meters, the light brightens to 100% for approximately 20 seconds, then returns to 20% brightness.
  3. **Mode 3: Motion Sensor Mode**
    At night, the light remains off. When motion is detected within 3-5 meters, the light turns on at 100% brightness for approximately 20 seconds, then turns off completely.
  4. **Mode 4: SOS Mode**
    The light will flash continuously, serving as an emergency signal.
Diagram showing the four lighting modes: Dim Light, Dim Light + Motion Sensor, Motion Sensor, SOS Mode

Figure 6: Description of the Four Lighting Modes

Hand holding remote control for the solar light

Figure 7: Using the Remote Control

7. Maintenance

  • **Cleaning the Solar Panel:** Every 2-3 months, clean the surface of the solar panel to remove dust, dirt, or debris. This ensures optimal charging efficiency.
  • **Environmental Durability:** The light is IP65 rated and designed to withstand various climates, including cold winters and hot summers, as long as there is sufficient sunlight for charging.
Solar light adapting to various climates, showing waterproof feature

Figure 8: All-Weather Durability

8. Troubleshooting

Problem Possible Cause / Solution
Light does not turn on at night.
  • **Insufficient Charge:** Ensure the solar panel receives 4-6 hours of direct sunlight daily.
  • **Protective Film:** Check if the protective film on the solar panel has been removed.
  • **Nearby Light Source:** The light sensor may be detecting ambient light, preventing activation. Relocate the light away from other light sources.
  • **Mode Setting:** Verify the light is not in 'Mode 3' (Motion Sensor Only) if you expect continuous dim light.
Light does not respond to motion.
  • **Mode Setting:** Ensure the light is in 'Mode 2' or 'Mode 3' for motion detection functionality.
  • **Obstruction:** Clear any obstructions in front of the motion sensor.
  • **Distance/Angle:** Ensure motion occurs within the 3-5 meter detection range and 120° angle.
Remote control not working.
  • **Battery:** Check and replace the remote control battery if necessary.
  • **Line of Sight:** Ensure there is a clear line of sight between the remote and the light unit.
  • **Product Variation:** Confirm your specific product variant includes a remote control.
Light stays on continuously without motion.
  • **Mode Setting:** The light might be in 'Mode 1' (Dim Light Mode), which provides continuous low brightness.
  • **Sensor Interference:** Check for constant movement or heat sources near the motion sensor.

9. User Tips

  • **Maximize Charging:** Even if the light unit is installed indoors or in a shaded area, ensure the separate solar panel is positioned to receive maximum direct sunlight.
  • **Test Modes:** Experiment with the different lighting modes (Mode 1, 2, 3) to find the best setting for your specific needs and location.
  • **Remote Control Convenience:** If your model includes a remote, use it to easily switch modes or turn the light on/off without needing to reach the unit.
  • **Check Connections:** If the light is not working, double-check the connection between the solar panel and the light unit to ensure it is secure.

10. Warranty & Support

This product comes with a 30-day warranty from the date of purchase. Please retain your proof of purchase for any warranty claims.

For technical support or further inquiries, please contact your retailer or the manufacturer directly.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.