retekess TR629

Contents

Retekess TR629 Portable Digital Radio User Manual

Model: TR629 | Brand: Retekess

Introduction

The Retekess TR629 is a versatile portable digital radio featuring AM, FM, and SW bands with DSP technology for enhanced reception. It includes a backlight LCD display, a loud volume speaker, and functions as a recorder, clock, and alarm. This manual provides detailed instructions for safe operation, setup, and use of all its features.

Safety Precautions

Please read and understand all safety instructions before using this product to prevent electric shock, injury, or damage to the device.

General Safety Warnings

  • Improper operation or use may cause electric shock. Always follow operating instructions strictly. Do not open the back cover without authorization, as there is a risk of electric shock.
  • Do not place liquid-filled objects or lighted candles on the device.
  • Avoid using the radio near heat sources such as radiators, heat registers, stoves, or other heat-producing apparatus.
  • Do not expose this product to water or moisture (e.g., near bathtubs, washbasins, kitchen sinks, laundry tubs, wet basements, or swimming pools).
  • Ensure the machine is placed in a well-ventilated, flat area with 5-10 cm clearance on all sides for proper airflow. Do not cover the machine with tablecloths or paper, or place it on a bed or blanket, to prevent blocking air vents.
  • Prevent solids or liquids from entering the device through vents. Do not expose the machine to water droplets or splashes.

Avoid Choking Hazard

Choking Hazard SymbolSmall Parts. Not for children under 3 years.

Protect Your Hearing

Warning SymbolUse the lowest volume necessary. Increase volume only in noisy surroundings. Turn down volume before using headphones/earpieces. Limit high-volume listening time. Do not place the radio speaker directly against your ear. Excessive sound pressure from earphones can cause hearing loss. Loud noises can cause temporary or permanent hearing damage.

Unauthorized Modification and Adjustment

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate this radio. Transmitter adjustments should only be performed by technically qualified personnel.

Location of Parts and Controls

Familiarize yourself with the various parts and controls of your Retekess TR629 radio.

Front view of Retekess TR629 radio with labeled controls

Figure 1: Front View of TR629 with Main Controls

Side view of Retekess TR629 radio with labeled ports

Figure 2: Side View of TR629 showing TF Card Slot, USB Port, Earphone Jack, and Tuning Knob

Back view of Retekess TR629 radio with labeled components

Figure 3: Back View of TR629 showing Retractable Antenna, Handle, AC Socket, and Battery Compartment

  1. AC socket
  2. Power/ Sleep Timer Key
  3. Play/Pause Key (long press to automatically search)
  4. Previous/Time Setting Key
  5. Next/Clock Alarm Setting Key
  6. Recording/ Store Stations Key
  7. LCD Display
  8. 0-9 Number Key
  9. Band Switch
  10. Volume Control
  11. Function Selector
  12. Station Selection Key
  13. TF Card Slot
  14. USB Port
  15. Earphone Jack
  16. Retractable Antenna
  17. Handle
  18. Battery Compartment (Back)

Power Supply

The Retekess TR629 supports dual-mode power supply: AC power and battery operation.

Important Matters

  • Before connecting AC power or installing batteries, ensure the machine is turned off.
  • This machine can only be connected or used with specified batteries and AC household power sources.

Using AC Power

Plug one end of the AC power cord into the AC power jack on the radio and the other end into a household power outlet. Note: The voltage supported is 220V.

  • When the power cord is connected, any installed batteries will stop being used, and the radio will switch to AC power.
  • In the shutdown state, the power supply is not completely cut off. Unplug the power plug to completely cut off power.
  • Always hold the plug when disconnecting the power cord; do not pull the cord itself.
  • Never touch the AC power plug with wet hands to avoid electric shock.
  • Position the power cord to avoid bending, twisting, or trampling. Ensure the power plug is easily accessible for disconnection.

Battery Operation

Open the battery compartment cover on the back. Install three (3) 1.5V UM1 (D-size) batteries according to the polarity diagram inside the compartment, then close the battery door. Batteries are not included.

  • When using battery power, the AC power cord must be unplugged.
  • If the volume is reduced or sound is distorted, replace the batteries.
  • Do not mix different types of batteries or old batteries with new ones. Do not charge or heat batteries.
  • Remove exhausted batteries promptly. If a battery leaks, remove it and wipe the liquid thoroughly. Dispose of waste batteries at officially designated recycling locations.
  • Battery life is limited; use AC power as much as possible.
  • Do not expose batteries to overheated environments (e.g., direct sunlight, open flames).
Diagram showing dual power supply options for the radio

Figure 4: Dual-mode Battery Supply (AC 220V and 3*D batteries)

LCD Display

The radio features an LED-backlit LCD display that shows various information and settings. The backlight can be turned on or off.

LCD display showing frequency and time

Figure 5: LCD Display with Backlight On

Comparison of LCD display with backlight on and off

Figure 6: LED-Backlit LCD showing battery status and time with backlight on and off

LCD Display Indicators

  1. Battery Level
  2. Sleep Timer
  3. Alarm Clock
  4. Music Mode
  5. Radio Mode
  6. USB Mode
  7. TF Card Mode
  8. REC Mode
  9. Volume Level
  10. FM Mode
  11. Play/Pause Mode
  12. MW Band Mode
  13. Music Folder
  14. SW Mode
  15. Recording File
  16. PM Time
  17. AM Time
  18. Track display when playing USB device (2 seconds to playtime)
  19. Frequency display on radio mode
  20. Display the time when shutting down
  21. Preset Stations Number
  22. Enter DEL Function
  23. MW Frequency Unit
  24. FM/SW Frequency Unit

Radio Operation

Tuning and Station Selection

  1. Short press the Power button to turn on the radio.
  2. Slide the Function Selector to the 'Radio' position and select the desired band (FM, AM, or SW). The LCD will display the corresponding frequency.
  3. Automatic Station Search (ATS): Long press the Play/Pause button to search for radio stations. Found stations will be automatically stored. The radio will play the first stored station after the search is complete.
  4. Use the Previous and Next keys to select and play stored radio stations.
  5. Manual Frequency Input: Press the 0-9 number keys to directly enter the desired radio frequency. For example, to listen to 99.5MHz, input "9", "9", and "5" continuously.
  6. Saving a Station: To save a station, press the Store Station button. The LCD station number display will flash. Use the Previous and Next buttons to select the desired station number, then short press the Store Station button again to save.
  7. Adjust the volume level using the Volume Control Knob.

Manual Station Selection

  1. Rotate the Station Selection button to select the desired radio station.
  2. While listening to the radio, long press the "0" key until "MEM" flashes on the LCD display, then enter the valid radio station number to listen.
Diagram showing shortcut keys for radio operation

Figure 7: Shortcut Keys for Easy Operation

Antenna Adjustment for Optimal Reception

Diagram showing antenna adjustments for FM, SW, and MW reception

Figure 8: Antenna Adjustment for FM, SW, and MW Reception

  • FM Reception: Extend the telescopic antenna and adjust its direction and angle for best reception.
  • SW Reception: Fully extend the telescopic antenna and keep it vertical for best reception.
  • MW Reception: Retract the telescopic antenna and rotate the unit to reorient the built-in ferrite bar antenna for best reception.

DEL (Delete) Function

When playing a USB device or listening to a radio station, long press the DEL key (number key 6) to enter the delete interface. The "DEL" icon will flash on the display. Use the Previous or Next key to select the track or station number to be deleted, then press the Delete key again to confirm deletion. If no operation occurs within 5 seconds, the delete function will automatically exit.

USB/TF Card Playback

The radio supports MP3/WMA format files from TF cards (up to 32GB) and USB disks (up to 64GB). TF card and USB disk are not included.

Diagram showing TF card and USB disk insertion

Figure 9: Supporting TF Card & USB Disk for MP3/WMA Playback

  1. Short press the Power button to turn on the radio. Slide the Function Selector to the 'USB/TF' position. Insert the USB disk or TF card with MP3 or WMA files into the corresponding socket.
  2. Use the Previous and Next keys to select the desired track. Long press these keys to select -10 or +10 tracks.
  3. To directly enter a track number, press the 0-9 number keys. For example, to play track 32, press "3" and "2", then press the Play/Pause button to confirm. If no operation occurs for 3 seconds, it will automatically confirm and play the current track.
  4. Adjust the volume level using the Volume Control Knob.
  5. Press the Play/Pause button to pause or resume playback.

Recording Function

The TR629 allows you to record radio broadcasts directly to a TF card.

Image showing how to long press to record

Figure 10: Recording Function - Long press to record

  1. In radio mode, slide the band switch to the desired recording band. Insert a TF card into the corresponding socket.
  2. Press and hold the Record button to enter recording mode. "REC" will flash on the display.
  3. Short press the Record button again to save the recording file and return to the current playback state.
  4. To play the current recording file, slide the Function Selector to the 'USB' position. The radio will automatically play the last recording file.
  5. When playing files in USB mode, long press the A-B file switch key (number key 1) to cycle between music and recording files.

Note: Only broadcasting can be recorded. Recording requires a TF card to be inserted. Recordings are automatically stored in Folder B.

Time and Alarm Settings

The radio includes a built-in clock with alarm and sleep timer functions.

Image showing the radio with a clock display and alarm/sleep timer icons

Figure 11: Built-in Clock with 12h/24h, Alarm, and Sleep Timer functions

Time Setting

  1. In the shutdown state, long-press the Time Setting button to enter time setting mode. The hour character will flash on the LCD.
  2. Rotate the Station Selection button to adjust the hour.
  3. Short press the Time Setting button to confirm and then set the minute. The minute character will flash.
  4. Rotate the Station Selection button to adjust the minutes, and press the Time Setting button to confirm. The system will automatically confirm the current adjustment time if there is no operation within 5 seconds.

Note: After setting the time, long press the number "9" key in the shutdown state to switch between 12-hour or 24-hour format.

Clock Alarm Setting

  1. In the shutdown state, press and hold the Clock Alarm Setting button to enter the clock alarm setting. The hour character will flash. Rotate the Station Selection button to adjust the hour. Press the Clock Alarm Setting button to confirm and enter the minute setting. Rotate the Station Selection button to adjust the minute. Press the Clock Alarm Setting button to confirm. The system will automatically confirm the current adjustment time if there is no operation within 5 seconds.
  2. After setting the alarm time, short press the Clock Alarm Setting button to select the alarm mode: built-in alarm ringtone, alarm USB mode, alarm radio mode, or turn off the alarm.

Snooze and Cancel the Alarm

  1. When the alarm sounds, press any key (except the power button) to enter snooze state. The alarm will ring again in 5 minutes.
  2. If the alarm is not canceled, it will ring at the same time the next day. To disable the alarm, short press the Clock Alarm Setting key in the shutdown state.
  3. If the alarm mode is set to the built-in ringtone, the alarm will turn off if there is no operation within 3 minutes. Press the Snooze button within 3 minutes to stop the current ringing immediately, and the alarm will ring again in 5 minutes.
  4. If the alarm mode is set to USB/TF card or radio, the alarm will turn off if there is no operation within 60 minutes.

Sleep Timer Operation

The Sleep Timer can be set in the shutdown state to automatically turn off the radio after a set period.

Operation Steps:

  1. In the shutdown state, press and hold the Sleep Timer button to enter the Sleep Timer setting. The LCD will display the sleep timer icon.
  2. Rotate the Station Selection button to adjust the time.

Note: The Sleep Timer can be set from 1 to 90 minutes. It will be automatically confirmed in 3 seconds. If the sleep timer is set to "1", the system will automatically exit the sleep timer setting by rotating the Station Selection button. After setting, press and hold the Sleep Timer button again to view the remaining time. Short press again to reset the time.

Other Functions

Headphone Use

To listen privately without disturbing others, insert headphones into the 3.5mm earphone jack. The built-in speaker will automatically switch off, and audio will be routed to the headphones.

Image showing the radio with a 3.5mm earphone jack

Figure 12: Loud and High-quality Sound with 3.5mm Earphone Jack

Specifications

Detailed technical specifications for the Retekess TR629 radio.

Specifications table for Retekess TR629

Figure 13: Retekess TR629 Portable Radio Specifications

FeatureSpecification
Brand Nameretekess
Model NumberTR629
TypeAM / FM, SW
FM Frequency76-108 MHz
AM Frequency522-1620 KHz
SW Frequency2.3-21.19 MHz
Power SupplyAC 110V/220V, DC 4.5V (3 x 1.5V UM-1 batteries)
Speaker3.5 inches, 6 ohms, 3W
ScreenLCD screen display with backlight
Output Power1.3W
USB Output Power5V 0.15A
Dimensions (WxHxD)288*180*115mm
Body MaterialPlastic
WIFINo
BluetoothNo
PackageYes
Battery IncludedNo
High-concerned chemicalNone
OriginMainland China
CertificationCE, FCC

Package Contents

The following items are included in your product package:

Image showing the contents of the product package

Figure 14: Package Includes TR629 Radio, AC Power Cable, and User Manual

  • 1 x TR629 Radio
  • 1 x AC Power Cable (220V)
  • 1 x User Manual

User Tips

  • Voltage Compatibility: Please note that the AC power input for this radio is 220V. Ensure your local power supply is compatible or use appropriate voltage converters if necessary.
  • Bluetooth/SSB: This radio does not feature Bluetooth connectivity or explicit SSB (Single Sideband) reception for shortwave bands. It supports standard AM/FM/SW broadcasts.
  • Color: The radio is black, as shown in the product images.
  • Reception Improvement: For better shortwave (SW) reception, fully extend the telescopic antenna and keep it vertical. For AM, try rotating the entire unit to find the best signal.

Troubleshooting and FAQ

Common Issues and Solutions

Q: The radio is not turning on or has low volume.
A: Check the power source. If using batteries, ensure they are correctly installed and not depleted. If using AC power, ensure the cable is securely plugged in and the voltage is 220V. Replace batteries if necessary.
Q: Poor radio reception.
A: For FM/SW, fully extend and adjust the telescopic antenna. For AM, try rotating the entire radio unit to find a better signal. Ensure you are not in an area with strong interference.
Q: USB/TF card playback is not working.
A: Ensure the Function Selector is set to 'USB/TF'. Check that the USB disk or TF card is inserted correctly and contains MP3 or WMA format files. Verify that the storage capacity does not exceed 32GB for TF cards or 64GB for USB disks.
Q: The alarm is not sounding or is too quiet.
A: Check the alarm settings to ensure it is enabled and the volume is set appropriately. If using USB/TF card alarm mode, ensure the card is inserted and contains playable files. If no operation occurs within 60 minutes of activation, the alarm will turn off.

Warranty and Support

Most new products carry a two-year manufacturer's warranty from the date of purchase. Please keep your guarantee card for future reference, as it will not be replaced if lost.

Warranty Service

For warranty service, you will need to provide a receipt or proof of purchase from the actual seller for verification. You can obtain warranty and after-sales service by contacting the seller where you purchased the product or by contacting a Retekess Local Repair Center.

Exclusions from Warranty Coverage

The warranty does not cover:

  • Any product damaged by accident.
  • Damage resulting from misuse, abuse, unauthorized alterations, or repairs.
  • Products with altered, defaced, or removed serial numbers.

Regulatory Information

RF Energy Exposure and Product Safety Guide

Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.

FCC Requirements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

CE Requirements

Henan Eshow Electronic Commerce Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU, ROHS Directive 2011/65/EU, and WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at www.retekess.com.

Disposal

Waste Electrical and Electronic Equipment (WEEE) symbolThe crossed-out wheeled-bin symbol indicates that in the European Union, all electrical and electronic products, batteries, and accumulators must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.

IC Requirements (Canada)

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

RF Warning Statements

  • DO NOT operate the radio without a proper antenna attached, as this may damage the radio and exceed RF exposure limits. Use only manufacturer-supplied or authorized antennas.
  • To avoid interference, turn off the radio in areas where signs are posted to do so.
  • DO NOT operate the transmitter in areas sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.