1. Introduction
The Hantek TO1000 series represents a new generation of multi-functional full touch screen handheld oscilloscopes. Designed for portability and durability, these devices feature a thin body, light weight, and a unique hanging design for hands-free operation. They are anti-falling and anti-seismic, ensuring robustness in various working environments. The TO1154D model integrates an oscilloscope, multimeter, signal generator, and spectrum analyzer into a single, powerful unit.
This manual provides essential information for the safe and efficient operation of your Hantek TO1154D oscilloscope. Please read it thoroughly before use.

2. Key Features
- Multi-Touch Large Screen: Features an 800x480 resolution display with a user-friendly UI for an excellent interactive experience.
- High Performance Oscilloscope: Standard configuration includes 4 channels, a maximum bandwidth of 150MHz, a maximum sampling rate of 1GSa/s, and 8M large storage depth.
- Integrated Functions: Combines digital storage oscilloscope, arbitrary function signal generator, high-precision multimeter, data recorder, FFT spectrum analyzer, and frequency meter.
- Signal Generator: Built-in arbitrary waveform generator with a highest output frequency of 25MHz (available on 'D' models like TO1152D and TO1154D).
- Multimeter Functionality: Provides high-precision multimeter capabilities including data recording, storage, trend charts, and statistical analysis.
- Durable Design: Unique suspension foot design allows for multi-angle adjustment, offering anti-falling and anti-seismic protection.
- Long Battery Life: Built-in 10000mAh super large capacity lithium battery ensures long endurance, with standby time up to half a year.
- Fast Charging: Supports Type-C fast charging with a standard 18W charger, compatible with mobile phone charging equipment.
- One-Key Waveform Storage: Convenient and fast waveform saving.


3. Package Contents
The standard package for the Hantek TO1154D includes the following items:
- Hantek TO1154D Handheld Oscilloscope
- Carrying Package/Bag
- Probe (2CH*1, 4CH*2)
- HT324 (2CH*1, 4CH*2)
- 18W Charger, Type-C*1
- Multimeter Probe (for TO1000C/D Series)

4. Initial Setup
4.1 Charging the Device
The Hantek TO1154D is equipped with a built-in 10000mAh detachable lithium battery. Before initial use, it is recommended to fully charge the device.
- Connect the provided 18W Type-C charger to the Type-C port on the side of the oscilloscope.
- Plug the charger into a suitable power outlet.
- The charging indicator will illuminate, and the battery icon on the screen will show charging status.
- A full charge ensures long endurance and can provide standby time of up to half a year.

4.2 Powering On/Off
Press and hold the power button located on the device to turn it on or off. The multi-touch screen will display the Hantek logo and then the main interface.
4.3 Physical Placement
The device features a unique suspension foot design, allowing for multi-angle adjustment. This enables hands-free operation and provides anti-falling and anti-seismic protection. Adjust the foot to your desired viewing angle for stable placement on a workbench or other surfaces.

5. Operating Instructions
The Hantek TO1154D features a multi-touch large screen with an intuitive user interface. Navigate through functions by tapping and swiping on the screen.
5.1 Oscilloscope Function
To access the oscilloscope function, tap the 'OSC' icon on the main screen. You can then configure settings such as:
- Channel Selection: Select between 2 or 4 channels depending on your model and measurement needs.
- Bandwidth: Up to 150MHz.
- Sampling Rate: 1GSa/s.
- Storage Depth: 8Mpts.
- Trigger Settings: Adjust trigger mode (Automatic, Normal, Single), level, slope (Rising, Falling, Rising & Falling), and source (CH1-CH4 / CH1-CH2).
- Vertical Scale: Adjust mV/div or V/div for each channel.
- Horizontal Scale: Adjust time/div.
- Measurements: Utilize automatic measurements for various waveform parameters (e.g., Frequency, Amplitude, Max, Min, Period, Duty Cycle).
- Waveform Storage: Use the 'Save' function to store waveforms for later analysis.

5.2 Digital Multimeter (DMM) Function
Tap the 'DMM' icon to switch to multimeter mode. The multimeter supports various measurements:
- DC Voltage (400mV to 600V)
- AC Voltage (400mV to 600V, 40Hz-400Hz)
- DC Current (40.00mA to 10.00A)
- AC Current (40.00mA to 10.00A, 40Hz-400Hz)
- Resistance (400.0Ω to 40.00MΩ)
- Capacitance (40.00nF to 100.0μF)
- Diode Test (0V-1.0V)
- On/Off Measurement (<50Ω)
The DMM function also includes data recording, storage, trend charts, and statistical analysis features.
5.3 Arbitrary Function Generator (AFG) Function (TO1154D)
For models with the signal source function (like TO1154D), tap the 'AFG' icon. You can generate various waveforms:
- Standard Waveforms: Sine wave, Square wave, Triangle wave, Noise, DC.
- Frequency Range: 0.1Hz-25MHz (Sine wave), 0.1Hz-10MHz (Square wave/Pulse), 0.1Hz-1MHz (Triangle wave).
- Amplitude: 0mV-3Vpp (50Ω), 0mV-6Vpp (high resistance).
- Modulation: FM (1Hz-50KHz), AM (1Hz-50KHz).
Adjust frequency, amplitude, offset, and duty cycle as needed using the on-screen controls.
Video 1: Hantek TO1000 Series Multi-functional Full Touch Screen Oscilloscope Overview and Automotive Application
6. User Tips
No specific user tips were available from reviews or Q&A at this time. Always refer to the detailed specifications and operational guidelines for optimal performance.
7. Specifications
7.1 General Specifications
| Parameter | Specification |
|---|---|
| Panel Type | 7" TFT LCD |
| Display Resolution | 800 (horizontal) * 480 (vertical) pixels |
| Display Type | Point, Vector |
| Waveform Brightness | Adjustable |
| Grid Types | Solid line, Dotted line, None |
| Grid Brightness | Adjustable |
| Screen Brightness | Adjustable |
| Afterglow | 1s, 5s, 10s, 30s, Infinite, Off |
| Standard Interface | USB Host, USB Device |
| Power Supply | AC 100 - 240V, 50 - 60Hz, DC input 5V3A/9V2A/12V1.5A |
| Power Consumption | <8W |
| Fast Charge | Support fast charging |
| Battery | 3.7V 2600mAh*4 in parallel |
| Temperature (Operating) | 0°C-50°C |
| Temperature (Storage) | -20°C-60°C |
| Humidity (≤+104°F) | ≤90% relative humidity |
| Humidity (106°F-122°F) | ≤60% relative humidity |
| Cooling | Convection |
| Altitude (Operating and Nonoperating) | 3,000m (10,000 feet) |
| Altitude (Random vibration) | 0.31gRMS from 50Hz to 500Hz, 10 minutes on each axis |

7.2 Oscilloscope Specifications
| Parameter | TO1000 Series (1G Sampling) | TO1112 (250M Sampling) |
|---|---|---|
| Horizontal Scale Range | 2ns/div-100s/div (1, 2, 5 sequence) | 2ns/div-100s/div (1, 2, 5 sequence) |
| Incremental Time Measurement Accuracy (Full Bandwidth) | ±(1 sampling interval + 100ppm × reading + 0.6ns) | ±(1 sampling interval + 100ppm × reading + 0.6ns) |
| > 16 times on average | > 16 times on average | |
| Sampling interval = seconds/grid ÷ 200 | Sampling interval = seconds/grid ÷ 200 | |
| Vertical A/D Converter | 8-bit resolution, each channel sampled simultaneously | 8-bit resolution, each channel sampled simultaneously |
| Vertical Scale Range | 2mV/div-10V/div at input BNC | 10mV/div-10V/div at input BNC |
| Vertical Resolution | 8bit | 8bit |
| Vertical Sensitivity Range | 2mV/div-10V/div | 10mV/div-10V/div |
| Offset | ±1V (2mV/div-100mV/div), ±50V (2V/div-10V/div) | ±1Vmax (100mV/div), ±50Vmax (10V/div) |
| Dynamic Range | ±5div (8bit) | ±5div (8bit) |
| Optional Analog Bandwidth Limitation | 20MHz, Each channel is independently selectable | 20MHz, Each channel is independently selectable |
| DC Gain Accuracy | ±3% FullScale | ±3% FullScale |

7.3 Multimeter Specifications
| Measurement Item | Range | Precision | Resolution |
|---|---|---|---|
| Maximum resolution: 4000 points | |||
| Measuring method: Voltage, Current, resistance, capacitance, diode, on-off measurement | |||
| Maximum Input Voltage: AC:600V, DC:600V | |||
| Maximum Input Current: AC:10A, DC:10A | |||
| Input Impedance: 10MΩ | |||
| DC Voltage | 400mV | ±(1%+2) | 100μV |
| 4.000V | 1mV | ||
| 40.00V | 10mV | ||
| 400.0V | 100mV | ||
| 600.0V | 1V | ||
| Overload protection: 400mV: 250V, other: 600Vrms. | |||
| AC Voltage | 4.000V | ±(1.2%+5) | 1mV |
| 40.00V | 10mV | ||
| 400.0V | ±(1.5%+5) | 100mV | |
| 600.0V | 1V | ||
| Frequency: 40Hz-400Hz | |||
| DC Current | 40.00mA | ±(1%+2) | 10μA |
| 200.0mA | ±(1.5%+2) | 100μA | |
| 4.000A | ±(1.8%+2) | 1mA | |
| 10.00A | ±(3%+5) | 10mA | |
| Self restoring fuse: 200mA/250V, 4A and 10A range no fuse. | |||
| Resistance | 400.0Ω | ±(1%+3) | 0.1Ω |
| 4.000KΩ | ±(1.2%+5) | 1Ω | |
| 40.00KΩ | 10Ω | ||
| 4.000MΩ | ±(1.5%+3) | 1KΩ | |
| 40.00MΩ | 10KΩ | ||
| Overload protection: 220Vrms | |||
| Capacitance | 40.00nF | ±(3%+5) | 10pF |
| 400.0nF | 100pF | ||
| 4.000μF | 1nF | ||
| 40.00μF | 10nF | ||
| 100.0μF | 100nF | ||
| Overload protection: 220Vrms | |||
| Diode | 0V-1.0V | ||
| On off Measurement | <50Ω | ||

7.4 Mechanical Specifications
| Parameter | Specification |
|---|---|
| Dimension (L x W x H) | 248mm*176mm*54mm |
| Weight (including batteries) | 1.2KG |

7.5 Model Comparison (TO1000 Series)
| Model | Oscilloscope Channel | Bandwidth | Sample Rate | Memory Depth | AFG | Multimeter |
|---|---|---|---|---|---|---|
| TO1112 | 2 CH | 110MHz | 250MSa/s | 8M | / | / |
| TO1112C | 2 CH | 110MHz | 250MSa/s | 8M | / | YES |
| TO1112D | 2 CH | 110MHz | 250MSa/s | 8M | YES | YES |
| TO1154C | 4 CH | 150MHz | 1GSa/s | 8M | / | YES |
| TO1204D | 4 CH+1CH | 200MHz | 1GSa/s | 8M | 25MHz | YES |
| TO1254D | 4 CH+1CH | 250MHz | 1GSa/s | 8M | 25MHz | YES |
| TO1152C | 2 CH | 150MHz | 1GSa/s | 8M | / | YES |
| TO1152D | 2 CH+1CH | 150MHz | 1GSa/s | 8M | YES | YES |
| TO1154C | 4 CH | 150MHz | 1GSa/s | 8M | / | YES |

8. Maintenance
8.1 General Care
- Keep the device clean and free from dust and moisture. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures or direct sunlight.
- Do not use abrasive cleaners or solvents.
- Ensure the Type-C port and probe connectors are free from debris.
8.2 Battery Care
- To prolong battery life, avoid fully discharging the battery frequently.
- If storing the device for an extended period, charge it to approximately 50% and store in a cool, dry place.
- The battery is detachable; however, replacement should only be performed by qualified personnel.
8.3 Durability
The Hantek TO1154D is designed to be anti-falling and anti-seismic, making it sturdy and durable for various environments. However, avoid unnecessary drops or impacts to maintain its performance and longevity.

9. Troubleshooting
If you encounter issues with your Hantek TO1154D, consider the following basic troubleshooting steps:
- Device not powering on: Ensure the battery is charged. Connect the device to the charger and try again.
- Screen unresponsive: Try restarting the device. If the issue persists, ensure the screen is clean and free from obstructions.
- Inaccurate measurements: Check probe connections and calibration. Ensure correct settings are applied for the specific measurement type.
- Signal generator not working: Verify that the AFG function is enabled and parameters (frequency, amplitude) are set correctly.
- Device overheating: Ensure proper ventilation around the device. If overheating persists, discontinue use and contact support.
For more detailed troubleshooting or complex issues, please refer to the official user manual PDF or contact Hantek customer support.
10. Warranty and Support
For detailed warranty information, technical support, and service inquiries, please refer to the official Hantek documentation. A comprehensive user manual in PDF format is available for download, which includes detailed instructions and support contacts.
You can access the user manual PDF here: Hantek TO1000 Series User Manual (PDF)