1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your IRALAN Ceiling Fan with Light. This modern and simple fan with integrated lighting offers remote control and smartphone app functionality, 6-speed wind adjustment, dimmable LED light, and quiet operation. It is suitable for various rooms including bedrooms, living rooms, dining rooms, and kitchens.
2. Safety Rules
WARNING: Always disconnect power at the circuit breaker before installation or maintenance.
- Prior to commencing fan installation, switch off the circuit breaker in the fuse box to cut off power.
- Carefully review all instructions and safety guidelines before proceeding with the installation of your new fan.
- Ensure that all wiring adheres to national and local electrical codes. If you lack familiarity with wiring, it is advisable to seek assistance from a certified electrician.
- Avoid bending the blades during installation, while balancing them, or when cleaning the fan.
- Refrain from inserting foreign objects between the rotating fan blades.
- Confirm that the chosen installation site allows the fan blades to rotate freely without encountering any obstacles.
- To minimize the risk of electric shock, disconnect the electrical supply circuit before attaching the light kit.
- Following fan installation, verify that all mounting components are securely in place to prevent the fan from falling.
- Turn off the fan and wait until the blades come to a complete stop before conducting any maintenance or cleaning tasks.
3. Package Contents
Please check the package contents against the list below:
- A. Ceiling fan light body *1
- B. Remote control *1
- C. Wood screws *1
- D. Expansion screws *4
- E. Screwdriver *1

4. Installation Tools
The following tools are required for assembly and installation:
- Star-head Screwdriver
- Wire-stripping Pliers
- Stepladder
- Electrical Tape

5. Setup and Installation
IMPORTANT: Ensure power is OFF at the circuit breaker before starting installation.
5.1. Plate Installation
The circular hanging plate is pre-assembled on the top of the fan. Loosen the 4 side screws to disassemble it first.

Fasten the circular hanging plate to the ceiling using the screws provided:
For wooden ceiling:
Start by drilling a pilot hole in the ceiling using a power drill. Then attach the mounting plate using 4 wood screws.
For concrete ceiling:
Use a hammer drill and a suitable carbide drill bit to create a hole in the base material. After clearing out any debris, insert the 4 expansion screws and tighten them using a wrench.

5.2. Wiring Preparation
Lift the fan towards the ceiling to suspend it from the mounting bracket using the security cable loop and washer hook. This allows you to start wiring without holding the fan body.
Tip: Seek the help of another person to hold the stepladder in place and to lift the fan up to you once you are set on the ladder.

5.3. Wiring Connections
WARNING: Disconnect the electrical supply circuit before wiring to reduce the risk of electric shock.
- Put the receiving unit into the top of the fan body and fasten it with electrical tape to avoid movement.
- Make wire connections according to the wire color labels and the diagram below. Connect Live (Black) and Neutral (White) wires appropriately.

5.4. Mounting the Fan to the Ceiling
Once wire connections are completed, lift the fan body carefully and align the collar with the mounting bracket. Tabs on the ceiling plate should seat into the channel on the inside of the fan collar.
Rotate the fan so that the set screw holes on the fan body align with the set screw holes on the ceiling plate. Take care not to pinch or damage internal wires. Insert and firmly tighten two canopy screws from the screw pack.
Tip: Seek the help of another person to hold the stepladder in place and to lift the fan up to you once you are set on the ladder.
6. Operating Instructions
6.1. Remote Control
This product uses 2.4G wireless digital remote control technology for simple and convenient operation with strong anti-interference ability.
Remote Control Functions:

- All Off: Turns off both fan and light.
- Timing Setting (1H/2H): Sets a timer for the fan/light to turn off after 1 or 2 hours.
- Reverse the fan rotating direction (F/R): Changes the fan's direction for summer (downward airflow) or winter (upward airflow).
- Fan Speed Regulation (1-6): Adjusts fan speed from 1 (soft wind) to 6 (strong wind).
- Increase/Reduce Brightness (+/-): Adjusts the light brightness.
- Changing Color Temperature: Cycles through different color temperatures (e.g., 3000K, 4000K, 6500K).
- Night Light: Activates a low-brightness night light mode.
- Light ON/OFF: Toggles the light on or off.
Remote Control Matching Code:
Turn on the power and press and hold the light pairing key (usually the 'SETUP' or 'Code matching' button) within 5 seconds of the light turning on. When you hear a beep or the light flashes, the code match is successful. If you need to match the code a second time, wait 30 seconds before turning on the power and repeating the above operation.
Warm Tip: The remote control is paired before delivery. If it doesn't work, replace the battery (2x AAA 1.5V) and try pairing again.
6.2. App Control
The fan can also be controlled via a smartphone application.
Download the App:
Scan the QR code below with your mobile phone to install the application.

CAUTION: To connect to the mobile app, please use the wall switch to control the fan light. Do not use the remote control during the initial connection, otherwise it will not connect to the phone.
App Connection Guide (iPhone, Android similar):
- Scan the QR-Code to download the APP and register an account as per the instructions.
- Log in to the account, and click "+" to add the device. You can edit the device name, room, and choose the device type (such as fan light).
- Click on the menu icon (usually three horizontal lines) to enter settings.

App Button Function Description:
- Code matching button: Click this button within 5 seconds of turning on the light. If the light source flashes or the buzzer sounds "di", the pairing is successful. If pairing fails, repeat.
- Timer: Choose a time to turn off the device regularly.
- Natural Wind: Simulates natural wind.
- Sleep Wind: Provides a gentle wind suitable for sleep.
- Reverse Direction: Rotates the fan in reverse.
- Change Wind Direction: Toggles the direction of the wind.
- Forward Rotation: Rotates the fan forward.
- White & Yellow Light (10% brightness): Both white and yellow lights turn on at 10% of maximum brightness.
- White & Yellow Light (Max brightness): Both white and yellow lights turn on at maximum brightness.
- Yellow Light (Max brightness): Only yellow light turns on at maximum brightness.
- White Light (Max brightness): Only white light turns on at maximum brightness.
7. Maintenance
WARNING: Before servicing or cleaning your fan, switch power off at the service panel and lock the service disconnecting means to prevent power from being switched on accidentally.
- Because of the fan's natural movement, some connections may become loose. Check the support connections, brackets, and blade attachment twice a year. Make sure they are secure.
- Clean your fan periodically to help maintain its new appearance over the year. Do not use water when cleaning. This could damage the motor, or possibly cause electrical shock.
- Use only a soft brush or lint-free cloth to avoid scratching the finish. Cleaning products may damage the finished surface.
- There is no need to oil your fan. The motor has permanently lubricated bearings.
- If installed in a coastal, humid environment, regular surface cleaning may be necessary to avoid deterioration or oxidizing effects of salt or other corrosive elements. A Damp Location rating is not an assurance of finish durability. Preventative measures should be taken depending on the environmental exposures your fan will undergo to preserve and protect the finish quality and appearance of your fan.
8. Troubleshooting
Please read all installation instructions carefully. After reviewing the following tips, if you are unable to solve a problem, please contact customer service for additional assistance.
Fan makes humming noise
- Be sure you are using the control set supplied with your fan.
- Make sure all fittings are firmly secured. Loose parts will often cause vibrational noise or humming. Removal and re-attachment can sometimes remedy such resonant vibrational noise.
Fan not responding to remote control
- Check that all wire connections are secure and made as instructed.
- Verify that power is on and reaching the receiver by a voltmeter.
- Verify that controller batteries are installed with proper polarity as indicated inside the battery cover.
Fan jitter
- Make sure the mounting plate and hardware at the ceiling are secure and firmly fastened. If necessary, use the wood screws provided to further secure the outlet box to the joist.
- Carefully lower motor housing and verify that the mounting plate is secure to the outlet box, screws are tight.
Light does not work
- Check wire connections at ceiling and receiver.
- Confirm that LED wire leads and terminal block are properly connected to the LED board.
Fan makes repetitive ticking noise
- Check for obstructions in the rotor path.
- Make sure mounting hardware at the ceiling is secure.
- Make sure all other hardware and blade attachments are tight.
- Give fan adequate "Break in Period" of several hours to several days then repeat steps above.
9. Specifications
| Attribute | Value |
|---|---|
| Product Name | Ceiling Fan Light |
| Model Number | SM-FAN |
| Input Voltage | AC 85-265V |
| Nominal Voltage | 120V-240V |
| Power Source | AC |
| LED Power | 55W (Output: DC75-110V, 25-36W) |
| Luminous Flux | 2000-82000 LM |
| Product Size | Ø50cm (Diameter) x H 14cm |
| Blade Size | 15CM |
| Weight | 3.5kg |
| Package Size | 52cm x 52cm x 15cm (approx.) |
| Package Weight | 3.68kg |
| Control Method | Remote Control |
| Switch Type | Remote Control |
| Receiving Method | RF2.4G |
| Valid Remote Distance | 8-20 meters |
| Is Dimmable | Yes (Unlimited dimming) |
| Light Source | LED bulbs |
| Number of Lights | 1 pcs |
| Fan Speed | 6 gears (555-856r/min) |
| Reversible Motor | Yes |
| Fan Timing | 1H/2H |
| Body Material | Iron, Acrylic, Aluminum Alloy |
| Finish | Spray Paint |
| Style | Modern Style |
| Certification | CCC, CE |
| Origin | Mainland China |
| Is Batteries Included | No (Remote requires 2x AAA batteries) |
10. Warranty and Support
This product comes with a one-year warranty.
For any issues or support, please contact our after-sales team via email: sxdsltd@163.com
You can also refer to the official AliExpress service page for more details on free returns within 90 days: AliExpress Free Returns.
A PDF version of this manual is available for download: User manual (PDF)
11. User Tips
- App Connection: When connecting the fan to the mobile app for the first time, ensure you use the wall switch to control the fan light, not the remote control. This helps establish a stable connection.
- Electrical Wiring: If you are not familiar with electrical wiring, it is highly recommended to seek assistance from a certified electrician to ensure safe and correct installation.