1. Introduction
Thank you for choosing the Huepar S04CG-5RG 4D Green Beam Cross Line Laser Level. This professional-grade laser tool is designed for various leveling and alignment tasks, offering high precision and versatile functionality. It features 16 green laser lines, an LCD screen display, Bluetooth connectivity for app control, and a remote control for convenient operation. This manual provides detailed instructions for safe and effective use of your new laser level.
Image: Huepar S04CG-5RG 4D Green Beam Cross Line Laser Level with included accessories.
2. Safety Information
WARNING: Do not point the laser beam directly into the eyes. Direct exposure to the laser beam can cause eye injury.
- Always operate the laser level in a safe environment, away from children and unauthorized personnel.
- Do not disassemble or modify the laser level. Repairs should only be performed by authorized service personnel.
- Avoid using the laser level near highly reflective surfaces that could redirect the laser beam into your eyes or others'.
- Ensure the work area is free from obstructions and hazards.
- Store the device in its hard carry case when not in use to prevent damage.
Image: The Huepar S04CG-5RG laser level, a Class 2 laser product.
3. Package Contents
Please check the package carefully to ensure all items are present and undamaged:
- 1 x Huepar S04CG-5RG Green Laser Level
- 1 x Wall Hanging Plate
- 1 x Multifunctional Pivoting Base
- 1 x 2600mAh Li-ion Battery
- 1 x Remote Control
- 1 x Power Adapter
- 1 x Target Board
- 1 x AA Battery Compartment
- 4 x AA batteries (Note: AA batteries are not included if shipped from China)
- 1 x User Manual (for LR-5RG and S04CG)
- 1 x Hard Carry Case
- 1 x LR-5RG Laser Detector
Image: All components included in the Huepar S04CG-5RG kit.
4. Specifications
4.1. S04CG Laser Level
| Feature | Specification |
|---|---|
| Laser Beam | Green Beam |
| Screen Type | LCD screen with backlight |
| Projection | 16 Green Laser Lines |
| Laser Class | Class 2 (IEC/EN60825-1/2014), <1mW power output |
| Laser Wavelength | Germany Osram 505nm-520nm |
| Horizontal / Vertical Accuracy | ±3mm/10m, ±1/9 in. at 33 ft |
| Leveling / Compensation Range | 3.5°±1° |
| Leveling Time | ≤3s |
| Working Distance | ≥20m, ≥40m with detector |
| Working Time | Approx. 5 hours (Li-ion battery), Approx. 0.5 hours (AA battery) |
| Power Source | 7.4V/2600mAh Li-ion battery & 4 x AA battery |
| Mount Size | 1/4"-20 |
| IP Rating | IP54 (waterproof, dustproof, shockproof) |
| Operating Temperature | Between -10℃ and +50℃ |
| Storage Temperature | Between -20℃ and +70℃ |
4.2. LR-5RG Laser Detector
| Feature | Specification |
|---|---|
| Pulse Duration | 50μs ; PWM: 5:5 |
| Frequency | 10KHz (Matched PWM and frequency for Line lasers) |
| Display | Dual LCD Display |
| Leveling Accuracy (High) | ≤2mm (1/13in) |
| Leveling Accuracy (Low) | ≤3mm (1/9in) |
| Working Distance | 130ft~200ft (typical, depends on light source) |
| Operating Time | 20 hours |
| Auto Power Off (No Signal) | 10 minutes |
| Power Source | 2*AA Batteries (Alkaline) |
| Dimension (LxWxH) | 140mm × 68mm × 26mm |
| Weight | 140g |
5. Setup
5.1. Power Supply
The Huepar S04CG-5RG offers versatile power options:
- Li-ion Battery Usage: Insert the provided 7.4V/2600mAh Li-ion battery into the battery compartment. This provides approximately 5 hours of continuous operation.
- AA Battery Usage: Alternatively, use the AA battery compartment with 4 x AA alkaline batteries for about 0.5 hours of usage.
- Direct Input Charging: The laser tool can be operated directly from the power adapter even without a battery installed. Connect the power adapter to the charging interface. The charging protection feature prevents overcharge.
Image: Three types of power supply for the laser level.
5.2. Mounting the Laser Level
The laser level can be mounted using several methods:
- Magnetic Pivoting Base: Attach the laser level to metal tracks or steel surfaces using the strong magnetic pivoting base.
- Lifting Base: Use the lifting base to raise the laser lines from the surface, allowing projection over uneven surfaces or obstructions. This base adjusts between 1 inch and 3.15 inches in height.
- Tripod Mounting: The device features a 1/4"-20 mounting thread for attachment to a standard tripod.
Image: Multiple installation methods for the Huepar laser level.
6. Operation
6.1. Powering On/Off and Mode Selection
To power on the device, slide the Power/Lock Keypad to the unlocked position. The device will automatically enter self-leveling mode.
6.2. Self-Leveling Mode
When the pendulum is unlocked, the self-leveling mode is enabled. The laser level will automatically adjust itself to project accurate horizontal and vertical lines. If the tool is out of its self-leveling range (±3.5°), the laser beam will beep and blink rapidly to alert you.
6.3. Manual Mode (Tilt Mode)
To activate manual mode, slide the Power/Lock Keypad to the locked position. In this mode, the laser tool can be placed at any angle to project non-level lines. The laser beam will blink every 3-5 seconds to indicate that it is not self-leveling.
Image: Self-leveling mode vs. Manual/Tilt mode.
6.4. Line Switching
You can switch between horizontal and vertical laser lines using the 'H' and 'V' buttons on the keypad, the remote control, or the Huepar app.
- Short press the 'H' button to cycle through horizontal lines.
- Short press the 'V' button to cycle through vertical lines.
Image: Various line modes available for projection.
6.5. Pulse Mode
To activate Pulse Mode, turn on the laser tool and then short press the power button. In Pulse Mode, the laser beams appear dimmer but the working range is extended up to 200ft when used with a Huepar Line Laser Receiver (LR-6RG & LR-5RG compatible). This mode is ideal for brighter working conditions.
Image: Pulse mode extends the working range up to 200Ft in brighter working conditions when using with Huepar Line Laser Receiver.
6.6. LCD Screen Display
The integrated LCD screen provides real-time status updates, including:
- Power level
- Angle information
- Pendulum lock status
- Pulse mode activation
Image: LCD screen display showing status of power, angle, pendulum, and pulse mode.
6.7. Remote Control
The included remote control allows for convenient operation from a distance of up to 33ft. Functions include:
- Turning ON/OFF laser lines
- Switching individual 360° laser lines
- Activating/deactivating pulse mode
- Adjusting line visibility
Image: Remote control and level button functions.
6.8. Bluetooth App Connectivity
Connect your S04CG Laser Level to the free Huepar APP via Bluetooth for enhanced control. The app allows you to:
- Control laser lines
- Switch modes
- Adjust settings
The laser tool can connect to two phones simultaneously (Android or iOS).
Image: Smart Bluetooth connectivity with the Huepar app.
6.9. Product Demonstration Video
Video: A demonstration of the Huepar S04CG-5RG laser level's features and operation.
7. Maintenance
- Cleaning: Keep the laser level clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- Storage: Store the device in its hard carry case in a dry, cool place when not in use. Remove batteries if storing for extended periods.
- Durability: The Huepar S04CG-5RG has an IP54 rating, making it waterproof, dustproof, and shockproof. This ensures reliability and robustness in various working conditions.
Image: Shock-proof, shatter-proof design and IP54 waterproof/dustproof features.
8. Troubleshooting
- Laser Beams Blinking/Beeping: If the laser beams are blinking rapidly and the device is beeping, it indicates that the laser level is out of its self-leveling range (±3.5°). Adjust the position of the device until it is within range.
- Laser Beams Blinking Slowly: If the laser beams are blinking every 3-5 seconds, it means the device is in manual (tilt) mode and is not self-leveling. This is normal behavior for manual mode.
- No Laser Output: Check the battery level and ensure the device is properly powered. If using AA batteries, ensure they are correctly inserted and have sufficient charge.
- Remote Control Not Responding: Ensure the remote control batteries are functional and that there are no obstructions between the remote and the laser level.
- Bluetooth Connection Issues: Ensure Bluetooth is enabled on your mobile device and the Huepar app is installed and updated. Try restarting both the laser level and your mobile device.
Image: Laser tool beeping as a reminder when out of self-leveling range ±3.5°.
9. User Tips
- Outdoor Use: For outdoor applications or in very bright indoor conditions, always use the included LR-5RG Laser Detector in Pulse Mode to extend the working range and improve visibility of the laser lines.
- Lifting Base: The included lifting base is very useful for tasks like tiling or installing baseboards, as it allows you to adjust the laser line height precisely above the floor or other surfaces.
- Versatile Applications: This laser level is suitable for a wide range of tasks, including hanging pictures, wall tiling, door and window installation, and stair laying.
Image: The laser level in use with a tripod and detector, suitable for various scenes.
10. Warranty and Support
The Huepar S04CG-5RG laser level is certified with CE, FCC, and RoHS, ensuring compliance with international quality and safety standards.
For any technical assistance, warranty claims, or support inquiries, please refer to the contact information provided with your purchase documentation or visit the official Huepar website.
Image: CE and RoHS compliance certificates.
