lilygo T-Beam V1.1

Contents

LILYGO TTGO T-Beam ESP32 LoRa Development Board User Manual

Model: T-Beam V1.1

1. Introduction

The LILYGO TTGO T-Beam is a versatile and high-performance development board designed for Internet of Things (IoT) applications. It integrates an Espressif Systems ESP32 SoC, a LoRa transceiver module, and a GPS/GNSS module, providing seamless connectivity and precise positioning capabilities. This compact board is ideal for a wide range of projects, from asset tracking and navigation to smart agriculture and general IoT development.

LILYGO T-Beam board with antenna
Figure 1: LILYGO TTGO T-Beam ESP32 LoRa Development Board with SMA antenna.

Key Features:

  • Power-Packed: Features an Espressif Systems ESP32 SoC with integrated Wi-Fi and Bluetooth, along with a built-in LoRa transceiver module for long-range, low-power communication.
  • Real-Time Positioning: Equipped with an onboard GPS/GNSS module (NEO-6M or NEO-M8N) for accurate real-time positioning and tracking.
  • Compact and Efficient: Designed for efficiency with a compact form factor and low power consumption, suitable for battery-powered applications.
  • Arduino Compatibility: Seamlessly integrates with the Arduino IDE, leveraging extensive libraries for easy programming and prototyping.

2. Specifications

General Specifications:

Attribute Value
Brand Name lilygo
Model Number T-Beam V1.1
Dimensions (WxHxD) 100.13*32.89mm
Weight 80g
Chipset ESP32-DOWDQ6
Type Bluetooth, Wi-Fi
Compatible Audio & Video Equipment Style Professional Audio Equipment
Certification CE, FCC

T-BEAM V1.2 Specifications:

  • MCU: ESP32
  • Flash: 4MB
  • PSRAM: 8MB
  • Driver: CH9102
  • Wireless protocol: Wi-Fi + Bluetooth 4.2
  • PMU: AXP2101
  • Onboard functions: 3 Buttons (Power+IO38+Reset)
  • Power Supply Mode: Support USB / 18650 battery

LoRa Module Comparison:

LoRa Module Comparison Table
Figure 2: Comparison of LoRa modules (SX1278, SX1276, SX1268, SX1262) and their specifications.

GPS/GNSS Module Comparison:

GPS Module Comparison Table
Figure 3: Comparison between NEO-6M (GPS) and NEO-M8N (GNSS) modules.

Dimensions:

T-Beam board dimensions diagram
Figure 4: Mechanical dimensions of the T-Beam board.

3. Components Overview

The T-Beam board integrates several key components for its functionality:

  • ESP32 Microcontroller: The core processing unit, providing Wi-Fi, Bluetooth, and general-purpose I/O.
  • LoRa Module: Enables long-range, low-power wireless communication. Available in various frequencies (433MHz, 868MHz, 915MHz, 923MHz) and chipsets (SX1278, SX1268, SX1276, SX1262).
  • GPS/GNSS Module: For precise location tracking. Options include NEO-6M (GPS) and NEO-M8N (GPS, BeiDou, GLONASS).
  • Antenna Connector: Available in SMA or IPEX types for connecting external LoRa and GPS antennas.
  • CH9102F: USB-to-serial chip for programming and serial communication.
  • 18650 Battery Holder: For portable power supply.
  • AXP2101: Power Management Unit (PMU) for efficient power control.
T-Beam key features diagram
Figure 5: Diagram highlighting the main components of the T-Beam board.
T-Beam V1.1 Pinout Diagram
Figure 6: Detailed pinout diagram for the T-Beam V1.1 board.

4. Setup

4.1. Antenna Connection

The T-Beam board requires external antennas for both LoRa communication and GPS/GNSS functionality. Ensure you connect the correct antenna to the corresponding connector (SMA or IPEX) on the board.

  • LoRa Antenna: Connect the LoRa antenna to the larger SMA or IPEX connector. Ensure the antenna frequency matches your LoRa module (e.g., 915MHz antenna for a 915MHz LoRa module).
  • GPS/GNSS Antenna: Connect the GPS/GNSS antenna to the smaller SMA or IPEX connector.
Antenna types and sizes
Figure 7: Various antenna types and their typical sizes for different frequencies.
T-Beam V1.1 SMA Base product display
Figure 8: T-Beam V1.1 with SMA antenna base (various views).
T-Beam V1.1 IPEX Base product display
Figure 9: T-Beam V1.1 with IPEX antenna base (various views).

4.2. Power Supply

The T-Beam can be powered via its USB-C port or by an 18650 Li-ion battery. Insert the 18650 battery into the battery holder, ensuring correct polarity. The board also features a charging indicator LED.

4.3. Initial Connection to Computer

Connect the T-Beam to your computer using a USB-C cable. The CH9102F USB-to-serial chip will allow your computer to recognize the board as a serial port. You may need to install the appropriate CH9102 driver for your operating system if it's not automatically detected.

5. Operating Instructions

5.1. Programming with Arduino IDE

The T-Beam is compatible with the Arduino IDE. To get started:

  1. Install the ESP32 board support package in your Arduino IDE.
  2. Select the appropriate board (e.g., "TTGO T-Beam") from the Tools > Board menu.
  3. Connect the T-Beam to your computer via USB.
  4. Select the correct serial port from the Tools > Port menu.
  5. Upload your Arduino sketches to the board.

For sample code and detailed programming guides, refer to the official LILYGO GitHub repository: LilyGo-LoRa-Series GitHub.

5.2. LoRa Communication

Utilize the LoRa module for long-range, low-power data transmission. Programming examples for sending and receiving LoRa packets are available in the GitHub repository. Ensure your LoRa module and antenna frequencies match.

5.3. GPS/GNSS Data Acquisition

The onboard GPS/GNSS module provides location data. Libraries and examples for parsing NMEA sentences and obtaining coordinates are available. Ensure the GPS antenna has a clear view of the sky for optimal signal reception.

5.4. Wi-Fi and Bluetooth

The ESP32 SoC enables standard Wi-Fi and Bluetooth connectivity. You can use these features for local network communication, data logging, or connecting to other Bluetooth-enabled devices. Standard ESP32 libraries can be used for these functionalities.

6. Maintenance

  • Cleaning: Keep the board clean and free from dust and debris. Use a soft, dry brush or compressed air for cleaning. Avoid using liquids.
  • Storage: Store the board in a dry, anti-static environment when not in use.
  • Handling: Handle the board by its edges to avoid touching sensitive components, especially when powered.
  • Battery Care: If using an 18650 battery, ensure it is charged regularly and stored safely. Do not overcharge or deep discharge the battery.

7. Troubleshooting

  • Board not recognized by computer: Ensure the USB-C cable is functional and properly connected. Install the CH9102 driver if necessary.
  • Failed to upload sketch: Check if the correct board and serial port are selected in the Arduino IDE. Ensure the board is powered.
  • No GPS fix: Ensure the GPS antenna is connected and has a clear, unobstructed view of the sky. Allow several minutes for the module to acquire satellites.
  • LoRa communication issues: Verify that both LoRa antennas are securely connected and that the frequency settings in your code match the hardware. Check for obstacles between transceivers.
  • Power issues: Ensure the 18650 battery is charged and correctly inserted, or that the USB power supply is stable.

8. User Tips

  • Programming Examples: For programming examples related to GPS and LoRa transmission using the Arduino IDE, always check the official LILYGO GitHub repository (LilyGo-LoRa-Series). It contains a wealth of resources and sample code.
  • Meshtastic Compatibility: If you plan to use Meshtastic firmware, consult the official Meshtastic documentation or community forums for the specific version compatible with your T-Beam model and GPS module to ensure proper GPS functionality.
  • Antenna Selection: Pay close attention to the frequency of your LoRa module and select an antenna that matches this frequency for optimal performance.

9. Warranty and Support

For technical support, documentation, and community resources, please refer to the official LILYGO P-IOT Store and their GitHub repository:

Please note that warranty terms and conditions are subject to the seller's policies at the time of purchase. Keep your purchase records for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.