BENETECH GM1357

Contents

BENETECH GM1357 Digital Sound Level Meter User Manual

High Precision Handheld Noise Tester Audio Level Decibel Meter

1. Introduction

The BENETECH GM1357 is a high-precision digital sound level meter designed for measuring sound levels in various environments. This compact and lightweight device is ideal for sound quality control, environmental noise assessment, and industrial applications, providing accurate readings from 30dBA to 130dBA.

Key Features:

  • Converts sound into electrical signals, processes data, and displays results on an LCD.
  • Mini handheld design, lightweight, easy, and convenient to use.
  • Measures sound levels from 30dBA to 130dBA.
  • Equipped with a sponge ball (windscreen) to filter out unwanted signals and minimize wind noise.

2. Safety Information

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

  • Do not operate the device in environments with high humidity or extreme temperatures.
  • Avoid dropping or subjecting the device to strong impacts.
  • Do not attempt to disassemble or modify the device. Repairs should only be performed by qualified personnel.
  • Keep the device away from strong electromagnetic fields.
  • Remove batteries if the device will not be used for an extended period to prevent leakage.

3. Package Contents

Upon opening the package, please verify that all items listed below are present and in good condition:

  • BENETECH GM1357 Digital Sound Level Meter
  • Sponge Ball (Windscreen)
  • User Manual (Printed, and a comprehensive PDF version is available for download. Refer to the official PDF user manual for detailed instructions.)
  • Carrying Case

Note: 4pcs 1.5V AA batteries and a DC 6V 100mA adapter are NOT included in the standard package and must be purchased separately.

4. Product Overview

Familiarize yourself with the components of your GM1357 Sound Level Meter:

BENETECH GM1357 Sound Level Meter with key specifications and carrying case
Figure 1: BENETECH GM1357 Sound Level Meter and accessories.
Front view of the BENETECH GM1357 Digital Sound Level Meter, showing the display and control buttons.
Figure 2: Front view with LCD display, Power, MAX, A/C, Level, and FAST/SLOW buttons.
Side view of the BENETECH GM1357, highlighting the input/output ports.
Figure 3: Side view showing DC 6V IN, DC OUT, and AC OUTPUT ports.
Side view of the BENETECH GM1357, showing the battery compartment.
Figure 4: Side view with battery compartment.
Back view of the BENETECH GM1357, showing the battery cover.
Figure 5: Back view with battery cover.

5. Setup

5.1. Battery Installation

  1. Locate the battery compartment on the back of the device (refer to Figure 5).
  2. Slide open the battery cover.
  3. Insert four (4) 1.5V AA batteries, ensuring correct polarity (+/-).
  4. Close the battery cover securely.
  5. Alternatively, the device can be powered using a DC 6V 100mA adapter connected to the DC 6V IN port (refer to Figure 3).

5.2. Attaching the Windscreen

Gently place the provided sponge ball (windscreen) over the microphone at the top of the device. This helps to reduce wind noise and improve measurement accuracy, especially in outdoor environments.

6. Operating Instructions

6.1. Power On/Off

  • Press the Power button (Power button icon) to turn the device ON.
  • Press and hold the Power button again to turn the device OFF.

6.2. Taking Measurements

Once powered on, the device will immediately begin measuring sound levels. The current sound level will be displayed on the LCD screen in decibels (dB).

6.3. Frequency Weighting (A/C)

Press the A/C button to switch between 'A' and 'C' frequency weighting characteristics:

  • A-Weighting (dBA): Simulates the human ear's response to sound, commonly used for environmental noise measurements.
  • C-Weighting (dBC): Provides a flatter response, suitable for measuring peak sound levels or noise from machinery.

6.4. Time Weighting (FAST/SLOW)

Press the FAST/SLOW button to select the desired response time:

  • FAST: Captures rapid changes in sound level (response time: 125ms).
  • SLOW: Provides an averaged reading for more stable measurements of fluctuating noise (response time: 1s).

6.5. MAX/MIN Hold Function

Press the MAX button to toggle between displaying the current, maximum, and minimum measured sound levels. This allows you to capture the highest and lowest noise events during a measurement period.

6.6. Level Adjustment

Use the LEVEL buttons (up/down arrows) to adjust the measurement range if the display shows 'OVER' or 'UNDER', indicating the sound level is outside the current range. This helps to ensure accurate readings within the device's capabilities.

7. Maintenance

7.1. Cleaning

Wipe the device with a dry, soft cloth. Do not use abrasive cleaners, solvents, or immerse the device in water. Keep the microphone free from dust and debris.

7.2. Storage

Store the sound level meter in its carrying case in a cool, dry place when not in use. Avoid exposing it to direct sunlight, high temperatures, or high humidity.

7.3. Battery Replacement

When the low battery indicator appears on the display, replace all four 1.5V AA batteries promptly to ensure accurate operation. Refer to section 5.1 for battery installation instructions.

8. Troubleshooting

Common Issues and Solutions:

  • Device does not power on:
    • Check if batteries are installed correctly with the right polarity.
    • Replace old or depleted batteries with new ones.
    • Ensure the DC adapter (if used) is properly connected and providing power.
  • Inaccurate or fluctuating readings:
    • Ensure the microphone is clean and unobstructed.
    • Verify the sponge ball (windscreen) is properly attached to minimize wind interference.
    • Check for strong electromagnetic interference in the measurement environment.
    • If the display shows 'OVER' or 'UNDER', adjust the measurement level using the LEVEL buttons.
  • No USB connectivity or data logging:
    • The BENETECH GM1357 model does not feature a USB port for direct data logging or graph generation. For models with these advanced features, please consult the product specifications or the full PDF manual for other BENETECH sound level meters.
  • Calibration concerns:
    • While the device is factory calibrated, for professional applications requiring certified accuracy, periodic calibration by a qualified laboratory is recommended. Consult the full user manual for any specific calibration procedures or recommendations.

9. Specifications

Parameter Value
Measurement Range 30 ~ 130 dB (A & C weighting)
Accuracy +/-1.5 dB
Frequency Response 31.5Hz ~ 8.5KHz
Resolution 0.1 dB
Dynamic Range 50 dB
Digit & Resolution 5 bits & 0.1 dB
Frequency Weighting A & C
Time Weighting FAST / SLOW
Sampling Rate 2 times/second
Microphone 1/2 inch Capacitance Microphone
Power Supply DC 6V 100mA Adapter or 4pcs 1.5V AA Batteries (not included)
Dimension 256 x 70 x 35 mm / 10.08 x 2.76 x 1.38 in
Certification CE
Origin Mainland China

10. User Tips

  • Always use the sponge ball (windscreen) over the microphone, especially in breezy conditions, to ensure accurate readings by minimizing wind noise.
  • For consistent measurements, try to maintain a consistent distance and angle from the sound source.
  • If you require data logging or graphical reports, please note that this specific GM1357 model does not support these features. Consider other BENETECH models designed for data recording if these functions are essential for your application.
  • For applications demanding certified accuracy, it is advisable to have the device periodically calibrated by a professional calibration service.

11. Warranty and Support

BENETECH products are manufactured to high-quality standards. For detailed information regarding warranty coverage, technical support, and service, please refer to the comprehensive official PDF user manual or contact BENETECH customer service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.