1. Introduction
This manual provides detailed instructions for the UGREEN Dual-Bay Hard Drive Docking Station (Model CM198). This device allows for simultaneous reading of two 2.5-inch or 3.5-inch SATA HDDs/SSDs and supports offline cloning. It features high-speed data transmission via USB 3.0 and is compatible with various operating systems.
2. Product Overview
2.1 Package Contents
The package includes the following items:
- 1x UGREEN USB 3.0 to SATA Hard Drive Docking Station
- 1x 1M USB A to B Data Cable
- 1x Power Adapter (EU 12V/3A)
- 1x User Manual
- 1x Product Warranty Card

2.2 Key Features
- Dual-Bay Design: Supports two 2.5-inch or 3.5-inch SATA HDDs/SSDs simultaneously.
- Offline Cloning: Copy data from one hard drive to another without a computer connection.
- High Capacity Support: Each bay supports up to 20TB, for a total of 40TB.
- USB 3.0 Connectivity: Ensures high-speed data transfer up to 5Gbps.
- Tool-Free Installation: Easy insertion and removal of drives.
- System Compatibility: Works with Windows, Linux, and Mac OS.
- Smart Sleep Mode: Automatically enters sleep mode after 15 minutes of inactivity to extend drive lifespan.
- Efficient Heat Dissipation: Open design for optimal cooling.
- Stable Signal Transmission: Equipped with an anti-interference USB cable.
- User-Friendly Design: Features anti-slip pads, LED indicator lights, and dust-proof baffles.
3. Specifications
| Feature | Specification |
|---|---|
| Brand | UGREEN |
| Model Number | CM198 |
| Product Type | 2.5''/3.5'' Hard Drive Docking Station |
| Compatibility | 2.5''/3.5'' SATA HDD/SSD |
| External Interface | USB 3.0 |
| Internal Interface | SATA |
| Supporting Hard Drive Capacity | Up to 20TB per bay (40TB total) |
| Data Cable | 1M USB A to B |
| Power Supply | EU 12V/3A |
| Case Material | PC+ABS Plastic |
| System Compatibility | Windows 10/8.1/7/Vista/XP, Linux, MAC OS |
| Dimensions (Approx.) | 16.2cm (L) x 11.2cm (W) x 6.2cm (H) |


4. Setup Instructions
4.1 Connecting to a Computer
- Insert your 2.5-inch or 3.5-inch SATA HDD/SSD(s) into the docking station bays. Ensure they are properly seated.
- Connect the 1M USB A to B data cable from the docking station to an available USB 3.0 port on your computer.
- Connect the EU 12V/3A power adapter to the docking station and then plug it into a power outlet.
- Power on the docking station. Your operating system should automatically detect the connected drives.


Note: Ensure your hard drive has a SATA interface. IDE hard drives are not compatible. Refer to Figure 4.3 for visual guidance.

5. Operating Instructions
5.1 Reading Drives Simultaneously
Once connected to your computer and powered on, the docking station allows you to access data from both inserted SATA HDDs/SSDs simultaneously. They will appear as separate drives in your operating system's file explorer.

5.2 Offline Cloning Function
The offline cloning feature allows you to duplicate data from a source disk (Disk A) to a target disk (Disk B) without needing a computer connection.
Important: The target disk (Disk B) must have a capacity equal to or greater than the source disk (Disk A).
- Insert the Source Disk into the "Source" bay (usually labeled A).
- Insert the Target Disk into the "Target" bay (usually labeled B).
- Ensure the USB data cable is disconnected from your computer.
- Connect the power supply to the docking station and switch on the power.
- Press and hold the clone button (usually a small button on the front or top) for 5-6 seconds. The LED indicator lights will begin to blink, signaling the start of the cloning process.
- A blue LED will flash at 25% to indicate the cloning progress. The lights will sequentially illuminate (25%, 50%, 75%, 100%) as cloning proceeds.
- The cloning process is complete when all LED indicator lights turn solid blue.
- Once complete, press the power switch to the OFF position and safely eject your drives.


6. Maintenance
- Keep the docking station clean and free from dust. The dust-proof baffles help, but regular cleaning is recommended.
- Avoid exposing the device to extreme temperatures or humidity.
- Do not disassemble the docking station. This will void the warranty.
- When not in use, disconnect the power adapter and store the device in a dry, cool place.
- The smart sleep mode helps prolong the lifespan of your hard drives by reducing unnecessary activity.


7. Troubleshooting
- Drives not detected:
- Ensure the power adapter is securely connected and the docking station is powered on.
- Check if the USB data cable is firmly connected to both the docking station and the computer.
- Verify that the hard drives are properly seated in the bays.
- Confirm that the hard drives are SATA type; IDE drives are not supported.
- Try connecting to a different USB port on your computer.
- Test with a different hard drive if possible.
- Slow data transfer speeds:
- Ensure you are using a USB 3.0 port on your computer for optimal speeds.
- Check the condition of the USB data cable; a damaged cable can affect performance.
- The speed of the hard drive itself can be a limiting factor.
- Offline cloning not starting:
- Make sure the USB data cable is disconnected from the computer before attempting offline cloning.
- Ensure the target disk (Disk B) has a capacity equal to or greater than the source disk (Disk A).
- Hold the clone button for the specified 5-6 seconds until the LEDs start blinking.
- Drives frequently disconnecting:
- Ensure the power adapter provides stable power.
- Check for loose connections of both power and USB cables.
- Avoid placing the docking station in areas with poor ventilation, as overheating can cause instability.
8. User Tips
- For best performance, always use the provided power adapter and USB 3.0 cable.
- When performing offline cloning, double-check that the source and target drives are in the correct bays to prevent accidental data loss.
- The docking station can be used with various devices beyond computers, such as smart TVs, smart routers, and gaming consoles (PS5/PS4). For phone connectivity, ensure your phone supports OTG function.

9. Warranty & Support
Your UGREEN Dual-Bay Hard Drive Docking Station comes with a product warranty. Please refer to the included Product Warranty Card for details regarding warranty coverage and terms. For technical support or further assistance, please contact UGREEN customer service through their official website or the contact information provided on the warranty card.