Dooya DT82 Gearbox

Contents

Dooya DT82 Gearbox Instruction Manual

For Dooya S Rail and Trietex Rail Systems

1. Introduction

Thank you for choosing the Dooya DT82 Gearbox. This manual provides essential information for the proper installation, operation, and maintenance of your gearbox. Please read these instructions carefully before installation to ensure safe and efficient use.

Video showcasing the Dooya DT82 Gearbox from various angles.

2. Compatibility

The Dooya DT82 Gearbox is designed for specific curtain rail systems. It is crucial to identify your rail type before installation to ensure proper fit and function. This gearbox is compatible with:

  • Dooya S Rail System
  • Trietex Rail System

Important: Different rail systems have different structures and require the correct gearbox variant. Please verify your rail type carefully.

Comparison of Trietex Rail (A) and Dooya S Rail (B) systems

Comparison of Trietex Rail (A) and Dooya S Rail (B) systems, highlighting compatibility requirements for the gearbox.

3. Package Contents

Please check the package for the following items:

  • 2 x Dooya DT82 Gearbox units
  • Mounting Screws
  • Metal Plate
  • Internal Gear
Exploded view of Dooya DT82 Gearbox components

Exploded view of the Dooya DT82 Gearbox components, including housing, metal plate, gear, and screws.

4. Setup and Installation

Follow these steps for the correct assembly and installation of your Dooya DT82 Gearbox.

4.1. Assembly of Rubber Belt for Curtain Motor

  1. Confirm Profiled Material Dimension:
    • For S-track: Length of profiled material = Total track length (M) - 14.8cm.
    • For A-track: Length of profiled material = Total track length (M) - 14.8cm.
  2. Confirm Rubber Belt Dimension:
    • For S-track: Length of rubber belt = (Total track length x 2) - 4.5cm.
    • For A-track: Length of rubber belt = (Total track length x 2) - 5.5cm.
    • Note: Cut through the middle of the gear apex.
  3. Assemble Rubber Belt Fastening Button:
    • Leave half a gear at both ends when assembling the fastening button.
    • Leave one full gear at the middle of two fastening buttons when assembling at the middle point of the rubber belt.
    • Fold the rubber belt and assemble the fastening button into the master carrier overlap arm.

4.2. Folding and Restoring Joint Track (for Transit)

Track Folding Method:

  1. Unfold the folding track.
  2. Unscrew the overlap arm and track connection bracket.
  3. Push the track connection bracket to one end.
  4. Gently move the overlap arm main body by hand, simultaneously undrawing the track joint point.
  5. Fold the track.

Restoring the Track:

  1. Gently combine the track sections.
  2. Push the track connection bracket to the joint point.
  3. Screw the track connection bracket and mount the overlap arm.
  4. The track restoration is complete.

4.3. Installation for Curtain Motor and Cable

  1. Check the position of the brackets and fix them at an appropriate place on the track.
  2. Assemble the curtain motor track in the appropriate place, then fix it with screws.
  3. Assemble the motor onto the track.
  4. Verify that the assembly is correct and secure.
  5. Complete the final assembly steps.

4.4. Gearbox and Hook Installation (New Type)

If you have the new type of track system, follow these steps:

  1. Place the master carrier overlap arm onto the profiled material as indicated.
  2. Place the lower cover into the upper cover and secure them with screws.
  3. Insert the profiled material into the assembly.
  4. Place the upper cover into both sides of the track.
  5. Insert the master carrier overlap arm into the fastening button, then place it into the profiled material.
  6. Place the rubber belt and gears into the upper covers.
  7. Place the runners into the track respectively.
  8. Place the connection parts into the lower cover and fasten them with a screwdriver.
Dooya DT82 Gearbox installed on a curtain rail

Dooya DT82 Gearbox installed onto a curtain rail.

5. Operating the Gearbox

The Dooya DT82 Gearbox is a mechanical component that facilitates the movement of your curtain system when driven by a compatible motor (e.g., Dooya DT/KT82 Motor, Tuya Motor). It does not have direct user controls. Its function is to transmit power from the motor to the curtain track system, enabling smooth opening and closing of curtains.

6. Maintenance

The Dooya DT82 Gearbox is designed for durability and requires minimal maintenance.

  • Cleaning: Periodically wipe the exterior of the gearbox with a dry, soft cloth to remove dust. Do not use abrasive cleaners or solvents.
  • Inspection: Occasionally inspect the gearbox and its connection to the rail for any signs of wear, damage, or loose screws. Tighten any loose fasteners as needed.
  • Lubrication: The internal components are pre-lubricated and generally do not require additional lubrication under normal operating conditions.

7. Troubleshooting

If you encounter issues with your curtain system related to the gearbox, consider the following:

  • Curtain Not Moving Smoothly:
    • Check if the gearbox is securely attached to the motor and the rail.
    • Ensure the rubber belt is correctly tensioned and not slipping.
    • Inspect the rail for any obstructions or damage.
  • Unusual Noises:
    • Verify all components are properly aligned and tightened.
    • Ensure the correct gearbox type is used for your specific rail system.
  • Gearbox Appears Damaged:
    • If the gearbox housing is cracked or internal gears are visibly damaged, replacement may be necessary.

8. Specifications

FeatureDetail
Model NumberDooya 82 Gearbox
CompatibilityDooya S Rail, Trietex Rail
Dimensions (L x W x H)10 cm x 4.5 cm x 3.2 cm
EU LVD VoltageHigh voltage: Above 50Vac or 75Vdc
Battery IncludedNo
OriginMainland China
Unit WeightApprox. 0.3 kg
Package Dimensions15 cm x 5 cm x 6 cm
Dimensions of Dooya DT82 Gearbox

Dimensions of the Dooya DT82 Gearbox: 10cm length, 3.2cm height, 4.5cm width.

9. User Tips

  • Always double-check your curtain rail system type (Dooya S Rail or Trietex Rail) before purchasing and installing the gearbox to ensure compatibility.
  • When dealing with Trietex Rails, ensure you have accurate measurements of the rail footage for proper planning and component selection.
  • For optimal performance, ensure all screws are tightened securely but do not overtighten.

10. Warranty and Support

For any issues not covered in this manual, or for warranty claims, please contact your retailer or the manufacturer's customer support. Keep your purchase receipt as proof of purchase.

© 2023 Dooya. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.