1. Introduction
This manual provides essential information for the safe and efficient operation of your PowMr Hybrid Solar Inverter. This advanced all-in-one solar inverter package is designed to provide a reliable and stable power supply for various applications, integrating a solar inverter unit with a user-friendly interface.
The inverter features a unique glass top cover design with a 6.25-inch display and responsive touchscreen buttons for convenient setup and monitoring. It supports a wide photovoltaic input range and includes a powerful MPPT charging module.
2. Key Features
- Wide PV Input Voltage Range: 55V~450VDC (with battery connected) or 120V~450VDC (without battery) for flexible solar panel configurations.
- High MPPT Charging Current: Built-in 150A (for 4.5K model) / 130A (for 6.5K model) MPPT solar charger for efficient energy harvesting.
- Battery Compatibility: Compatible with 24V/48V lithium-ion and lead-acid batteries (AGM, GEL, FLD, SLD, LI, USER types).
- Lithium Battery Activation: Features built-in automatic activation for lithium batteries.
- High Output Power: Up to 4500W (4.5K model) / 6500W (6.5K model) with a power factor of 1.0.
- Efficient Operation: No derating when AC input voltage is greater than 170V. Max solar charging efficiency up to 98%.
- Low Standby Power: Only 2W standby power consumption.
- Smart Design: Includes cooling fans for excellent heat dissipation and a dust-proof cover for harsh environments (optional anti-dusk kit available).
- Comprehensive Protection: Offers over temperature, over voltage, PV over voltage, short circuit, discharge, over charge, over current, under voltage, over-load, and backfill protection.
- Optional WiFi Monitoring: Can be equipped with a WiFi accessory for remote monitoring.
3. Setup and Installation
Proper installation is crucial for the safe and optimal performance of your inverter. Please follow these guidelines carefully.
3.1 Component Identification
Familiarize yourself with the inverter's components and connection points:

Figure 3.1: Inverter Front and Rear Panel Components
- LCD display
- Status indicator
- Charging indicator
- Fault indicator
- Touch Function buttons (ESC, UP, DOWN, ENTER)
- Power ON/OFF switch
- AC input
- Main output
- Second output
- PV 1 and PV 2 input
- RS232/WIFI/Remote LCD Communication Port
- Battery input
- Anti dust cover
3.2 Wiring Diagram
The following diagram illustrates a typical PV off-grid system energy storage setup with the hybrid inverter:

Figure 3.2: Typical System Wiring Diagram
Ensure all connections are secure and correctly polarized. Consult a qualified electrician for installation if you are unsure.
3.3 Battery Connection
The inverter is compatible with various battery types. When connecting lithium batteries, ensure the battery type is set to 'LI' in the inverter settings. The lithium battery will be activated by solar energy after 3 seconds.

Figure 3.3: Compatible Battery Types
4. Operating Instructions
4.1 Powering On/Off
Use the Power ON/OFF switch (component 6 in Figure 3.1) to turn the inverter on or off. Ensure all connections are verified before powering on.
4.2 LCD Display and Controls
The 6.25-inch LCD display provides real-time system status, including input/output voltage, charging status, and fault indicators. Use the touch function buttons (ESC, UP, DOWN, ENTER) to navigate menus and adjust settings.
4.3 Charging and Output Modes
The inverter supports multiple charging and output modes to optimize energy usage:

Figure 4.1: Charging and Output Modes
- Charging Modes: Solar priority, Solar+Utility, Only solar.
- Output Modes: Solar priority, Utility priority, SBU mode.
Refer to the inverter's on-screen menu for detailed configuration of these modes.
4.4 Remote Monitoring (Optional)
If equipped with the optional WiFi accessory, you can monitor your inverter remotely. Connect the WiFi accessory to the RS232/WIFI/Remote LCD Communication Port (component 11 in Figure 3.1) and follow the instructions provided with the accessory for setup.
Video 4.1: PowMr Hybrid Inverter Unboxing and Feature Overview
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your inverter.
5.1 Cleaning
The inverter features a dust-proof cover and cooling fans. Periodically inspect and clean the cooling fans and vents to prevent dust accumulation, which can affect heat dissipation. Use a soft, dry cloth for cleaning the exterior. Do not use liquid cleaners.

Figure 5.1: Cooling Fans and Dust-proof Cover
5.2 Connection Checks
Regularly check all electrical connections (PV, battery, AC input/output) to ensure they are tight and free from corrosion. Loose connections can lead to poor performance or safety hazards.
5.3 Environmental Considerations
Ensure the inverter is installed in a well-ventilated area, away from direct sunlight, moisture, and flammable materials. The operating temperature range is 0℃ to 55℃, and storage temperature is -15℃ to 60℃.
6. Troubleshooting
This section addresses common issues you might encounter with your inverter.
6.1 General Protection Features
The inverter is equipped with comprehensive protection mechanisms. If a fault occurs, the fault indicator (component 4 in Figure 3.1) will illuminate, and an error code may be displayed on the LCD. Refer to the specific error code in the full user manual for detailed troubleshooting steps.

Figure 6.1: Inverter Protection Features
- Short Circuit Protection
- Over Current Protection
- Over Voltage Protection
- Under Voltage Protection
- Over-Load Protection
- Backfill Protection
- Over-Temperature Protection
- Over Charge Protection
6.2 Common Issues & Solutions
- Inverter not turning on: Check battery connections, DC breaker, and ensure sufficient battery voltage.
- No AC output: Verify AC output connections, check for overload, and ensure the inverter is in an appropriate operating mode (e.g., Solar priority, Utility priority).
- Low PV charging: Ensure solar panels are clean, not shaded, and correctly connected. Check PV array MPPT voltage range.
- Inverter not accepting 110V AC input: This inverter is designed for 230Vac nominal input. It does not support 110V AC input.
7. Specifications
| Parameter | POW-HVM4.2M-24V-N | POW-HVM6.2M-48V-N |
|---|---|---|
| Line Mode Specifications | ||
| Input Voltage Waveform | Pure Sine Wave (Utility or Generator) | |
| Nominal Input Voltage | 230Vac | |
| Max AC Input Voltage | 300Vac | |
| Nominal Input Frequency | 50Hz/60Hz (Auto detection) | |
| Output Short Circuit Protection | Line mode: Circuit Breaker; Battery mode: Electronic Circuits | |
| Efficiency (Line Mode) | >95% (Rated R load, battery full charged) | |
| Inverter Mode Specifications | ||
| Rated Output Power | 4.2KW | 6.2KW |
| Output Voltage Waveform | Pure Sine Wave | |
| Output Voltage Regulation | 230Vac±5% | |
| Output Frequency | 50HZ | |
| Peak Efficiency | 0.93 | |
| Overload Protection | 3s@≥150% load; 5s@101%~150% load | |
| Surge Capacity | 2* rated power for 5 seconds | |
| Nominal DC Input Voltage | 24Vdc | 48Vdc |
| Cold Start Voltage | 23.0Vdc | 46.0Vdc |
| No Load Power Consumption | 30W | 50W |
| Charge Mode Specifications | ||
| Charging Algorithm | 3-Step | |
| AC Charging Current (Max) | 100A | 100A |
| Max. PV Array Power | 6200W | 6500W |
| Nominal PV Voltage | 240Vdc | 360Vdc |
| PV Array MPPT Voltage Range | 60Vdc~450Vdc (Battery Connected) / 120Vdc~450Vdc (Battery Disconnected) | 90Vdc~500Vdc (Battery Connected) / 120Vdc~500Vdc (Battery Disconnected) |
| Max. PV Array Open Circuit Voltage | 500Vdc | |
| Max Charging Current (AC charger plus solar charger) | 120A | 120A |
| Grid-Tie Operation | ||
| Nominal Output Voltage | 220/230/240VAC | |
| Feed-in Grid Voltage Range | 195-253VAC | |
| Feed-in Grid Frequency Range | 49-51±1Hz/59-61±1Hz | |
| Nominal Output Current | 18.2A | 26.9A |
| Maximum Conversion Efficiency (DC/AC) | 97% | |
| Two Load Output Power | ||
| Full Load | 4200W | 6200W |
| Maximum Main Load | 4200W | 6200W |
| Maximum Second Load (battery model) | 1400W | 2066W |
| Main Load Cut Off Voltage | 26VDC | 52VDC |
| Main Load Return Voltage | 27VDC | 54VDC |
| General Specifications | ||
| Safety Certification | CE | |
| Operating Temperature Range | 0℃ to 55℃ | |
| Storage temperature | -15℃ to 60℃ | |
| Dimension (D*W*H) | 468*318*159mm | |
| Net Weight | 7.5KG/9.5KG (depending on model) | |
8. User Tips
- Operation Without Battery: Yes, this inverter can operate without a battery. When operating without a battery, the PV Array MPPT Voltage Range is 120VDC~450VDC (for 4.5K model) or 120VDC~500VDC (for 6.5K model).
- Battery Compatibility: The inverter is designed to work with a variety of battery types including AGM, GEL, FLD, SLD, LI (Lithium-ion), and USER-defined settings. Ensure you select the correct battery type in the inverter's settings for optimal performance and safety.
- Anti-Dusk Kit: An optional anti-dusk kit is available for installations in harsh, dusty environments. This kit helps prevent dust from entering the inverter, extending its service life.
- UPS Functionality: The inverter features a fast transfer time (10ms typical for UPS applications), allowing it to seamlessly switch to battery power during grid outages, providing an uninterrupted power supply for critical loads.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official PowMr website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for any warranty claims.