1. Introduction
Thank you for purchasing the T&G TG117 Portable Bluetooth Speaker. This speaker is designed to provide high-quality stereo sound with versatile connectivity options, including Bluetooth, TF card, USB disk, and AUX input. Its portable, waterproof design makes it ideal for both indoor and outdoor use. Please read this manual carefully before use to ensure proper operation and to maximize your listening experience.

The TG117 speaker features TWS function for stereo pairing and a call function with noise elimination.
2. Safety Information
- Do not expose the speaker to extreme temperatures or direct sunlight for prolonged periods.
- Keep the speaker away from water and moisture, despite its IPX5 rating, to prevent damage.
- Do not disassemble, repair, or modify the speaker yourself. This will void the warranty and may cause damage or injury.
- Use only the specified charging voltage (5-20V DC via USB).
- Keep out of reach of children.
3. Package Contents
- 1 x TG117 Portable Bluetooth Speaker
- 1 x USB Charging Cable
- 1 x AUX Audio Cable
- 1 x User Manual (this document)

The speaker comes with essential charging and audio cables.
4. Product Overview
4.1 Control Buttons

Control buttons on the side of the speaker.
- Power Button (On/Off): Press and hold to power on/off. Short press to play/pause in Bluetooth mode, or answer/end calls.
- '+' Button (Next Song/Volume Up): Short press for next song. Press and hold to increase volume.
- '-' Button (Previous Song/Volume Down): Short press for previous song. Press and hold to decrease volume.
- 'M' Button (Mode Switch): Short press to switch between Bluetooth, TF Card, USB Disk, AUX, and FM Radio modes.
4.2 Input Ports

Input ports for various connectivity options.
- TF Card Slot: Insert a TF (Micro SD) card (up to 32GB) for direct music playback.
- Charging Port: Connect the USB charging cable here to charge the speaker.
- USB Slot: Insert a USB 2.0 flash disk for direct music playback.
- AUX Jack: Connect an external audio device via the 3.5mm AUX cable.
5. Setup and Operation
5.1 Charging the Speaker
- Connect the provided USB charging cable to the speaker's Charging Port.
- Connect the other end of the USB cable to a USB power adapter (5V/500mA recommended) or a computer's USB port.
- The charging indicator light will illuminate. It takes approximately 3-4 hours for a full charge.
- Once fully charged, the indicator light will turn off or change color (depending on the model).
Note: A full charge provides 6-8 hours of playback at 2/3 volume.
5.2 Powering On/Off
- To Power On: Press and hold the Power button (
) for a few seconds until you hear an audible prompt. - To Power Off: Press and hold the Power button again for a few seconds until you hear an audible prompt.
5.3 Bluetooth Pairing (Single Speaker)
- Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light and an audible prompt.
- Enable Bluetooth on your smartphone, tablet, or other Bluetooth-enabled device.
- Search for available Bluetooth devices and select "TG117" from the list.
- Once successfully paired, you will hear a confirmation sound, and the LED light will stop flashing.
- You can now play audio from your device through the speaker.

The speaker has a wireless working distance of up to 10 meters.
5.4 TWS (True Wireless Stereo) Pairing (Two Speakers)
The TWS function allows you to connect two TG117 speakers together for a true stereo sound experience.
- Ensure both TG117 speakers are powered off.
- Power on both speakers simultaneously. They will enter Bluetooth pairing mode.
- On one of the speakers (this will be your primary speaker), double-press the 'M' (Mode) button. The speakers will attempt to pair with each other.
- Once successfully paired, you will hear a confirmation sound, and the LED light on the primary speaker will flash, while the secondary speaker's LED will be solid.
- Now, enable Bluetooth on your device and connect to the primary "TG117" speaker as described in section 5.3.
- Audio will now play in stereo through both speakers.

Connect two speakers for an enhanced stereo experience.
5.5 Using TF Card / USB Disk
- Power on the speaker.
- Insert a TF (Micro SD) card or a USB 2.0 flash disk (with music files) into the corresponding slot.
- The speaker will automatically switch to TF Card/USB Disk mode and begin playing music.
- If it doesn't switch automatically, short press the 'M' button to cycle through modes until you reach the desired mode.

Supports direct playback from USB flash drives and TF cards.
5.6 Connecting via AUX
- Power on the speaker.
- Connect one end of the provided 3.5mm AUX audio cable to the speaker's AUX Jack.
- Connect the other end to the audio output jack of your external device (e.g., MP3 player, computer).
- The speaker will automatically switch to AUX mode. If not, short press the 'M' button to select AUX mode.
5.7 FM Radio Operation
- Power on the speaker.
- Short press the 'M' button repeatedly until you enter FM Radio mode.
- To auto-scan for stations, press and hold the Power button. The speaker will scan and save available stations.
- Use the '+' and '-' buttons to switch between saved stations.
Note: FM radio reception may vary depending on your location and environment. For better reception, try moving the speaker or connecting the AUX cable as an external antenna.
6. Operating Instructions
6.1 Music Playback
- Play/Pause: Short press the Power button.
- Next Track: Short press the '+' button.
- Previous Track: Short press the '-' button.
- Volume Up: Press and hold the '+' button.
- Volume Down: Press and hold the '-' button.
6.2 Call Function
When connected via Bluetooth to a smartphone:

Answer calls directly from the speaker with its built-in microphone.
- Answer Incoming Call: Short press the Power button.
- End Call: Short press the Power button during a call.
- Reject Incoming Call: Press and hold the Power button.
- The built-in noise and echo cancellation microphone ensures clear call quality.
7. Maintenance
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid dropping the speaker or subjecting it to strong impacts.
- When not in use for extended periods, store the speaker in a cool, dry place and charge it periodically to maintain battery health.
- Ensure all ports are dry before charging or connecting external devices, especially after exposure to water.
8. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Speaker does not power on. | Ensure the battery is charged. Connect to a power source and try again. |
| Cannot pair via Bluetooth. |
|
| No sound or low volume. |
|
| TWS pairing fails. |
|
| Poor FM radio reception. |
|
9. Specifications

Key technical specifications at a glance.
| Feature | Specification |
|---|---|
| Brand Name | T&G |
| Model | TG117 |
| Speaker Type | Portable |
| Communication | Bluetooth, AUX, USB, TF Card |
| Bluetooth Version | 5.3 |
| Wireless Range | <10m |
| Output Power | 10W (5W*2) |
| Frequency Range | 70Hz-20KHz |
| Battery Capacity | 1200mAh |
| Charging Time | Approx. 3-4 hours |
| Playback Time | 6-8 hours (at 2/3 volume) |
| Waterproof Rating | IPX5 |
| Dimensions (L x W x H) | 160 x 68.8 x 68.8 mm |
| Weight | Approx. 335g |
| Input Voltage | USB (5-20V DC) |
| Support Memory Card | Yes (TF Card up to 32GB) |
| Built-in Microphone | Yes |
| Sound Mode | 3D Surround Sound Mode, Stereo Sound Mode, Standard Mode |
| Certification | CE, FCC |
10. User Tips
- Portability: The TG117 is compact and lightweight, making it an excellent travel companion. Use the carrying strap for easy transport.
- Volume for Size: Users often note that the speaker's volume is surprisingly loud for its small size.
- Bass Expectation: While it offers 3D stereo and bass diaphragms, manage expectations for deep bass given its portable design. For more pronounced bass, a larger speaker might be required.
- TWS for Enhanced Sound: If you own two TG117 speakers, utilize the TWS function for a richer, more immersive stereo sound experience.
- FM Radio Reception: If FM radio reception is poor, try moving the speaker to an open area or connecting the AUX cable to act as an antenna.
- iPhone Compatibility: The speaker is compatible with iPhones and other Bluetooth-enabled smartphones.
11. Regulatory Information (FCC)
FCC ID Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important:
Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
12. Warranty and Support
For warranty information and customer support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.
A PDF version of the user manual may be available for download from the product page or by contacting customer support. (Reference: User manual (PDF))
13. Product Demonstration Video
Watch this video for a visual demonstration of the speaker's features and controls.