1. Introduction
This manual provides instructions for the proper installation and care of your Flydigi Magnetic Suction Sheet. This accessory is designed to provide a stable magnetic attachment surface for compatible Flydigi cell phone coolers, specifically models B5X, B6X, and B7X, on mobile devices that do not inherently possess magnetic attraction capabilities.
2. Setup Instructions
Follow these steps to correctly install the Magnetic Suction Sheet on your mobile device. Note: Mobile phones with built-in magnetic attraction functions can skip this installation step.
- Clean the Surface: Thoroughly clean the position on your mobile device where the magnetic suction sheet needs to be pasted. Ensure the surface is free from dust, grease, and moisture.
- Apply Protective Film: Tear off the No. 1 film from the protective film. Carefully stick it to the target area on your device. Press firmly to discharge any air bubbles, ensuring the protective film is fully attached. Once secure, tear off the No. 2 film.
- Attach Magnetic Suction Sheet: Paste the magnetic suction sheet onto the protective film. Ensure it fits completely and smoothly. For optimal adhesion, it is recommended to let the device stand undisturbed for at least 1 hour after installation before attaching the cooler.

3. Operating Instructions
Once the Magnetic Suction Sheet is securely installed on your mobile device, it provides a dedicated magnetic surface. Simply align your compatible Flydigi B5X, B6X, or B7X magnetic cell phone cooler with the installed sheet. The cooler will magnetically attach, providing efficient cooling for your device during use.
4. Maintenance
- Cleaning: If the surface of the magnetic suction sheet becomes dirty, gently wipe it with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the adhesive or the magnetic properties.
- Adhesion Check: Periodically check the adhesion of the sheet to your device. If it starts to peel, ensure the surface is clean and re-apply pressure. If the adhesive is compromised, replacement may be necessary.
- Storage: If removing the sheet, store it in a clean, dry place away from extreme temperatures to preserve its adhesive properties.
5. Troubleshooting
- Cooler Not Attaching Securely:
- Ensure the magnetic suction sheet is properly installed and has had sufficient time to adhere (at least 1 hour).
- Verify that your cell phone cooler is a compatible Flydigi B5X, B6X, or B7X model.
- Check for any obstructions or debris between the cooler and the magnetic sheet.
- Sheet Peeling Off:
- Ensure the initial cleaning of the phone surface was thorough.
- Avoid repositioning the sheet multiple times after initial application, as this can weaken the adhesive.
- If peeling persists, the adhesive may be compromised, and a new sheet might be required.
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | FLYDIGI |
| Model Number | B5X B6X B7X Sticker |
| Accessories Type | Dust Net |
| With USB | No |
| Compatible Brand/Model | Mobile Device |
| Origin | Mainland China |
| Package Weight | 0.02 kg |
| Package Dimensions (L x W x H) | 5 cm x 1 cm x 1 cm |
7. User Tips
- For the strongest and most reliable magnetic hold, always allow the newly installed suction sheet to cure for at least one hour before attaching your Flydigi cooler.
- Ensure the surface of your phone case (if used) is smooth and clean for optimal adhesion of the protective film and magnetic sheet.
8. Warranty and Support
For warranty information and technical support, please refer to the official Flydigi website or contact the retailer from whom you purchased this product. Keep your proof of purchase for any warranty claims.