1. Introduction
This manual provides detailed instructions for the safe and efficient operation of your CHANTOWER Pure Sine Wave Inverter. Please read this manual carefully before use to ensure correct usage and to prevent damage to the product or connected devices.
Product Features
- Compact Design: Lightweight in size and weight, high in efficiency, low in working noise, and reasonable in design.
- Advanced Control: Adopts efficient SPWM Pulse Width Control Technology and multiple high-tech and intelligent driver chips.
- High Reliability: SMT Chip Mounting Technology ensures precise control, high reliability, and low failure rate.
- Efficient Conversion: High efficiency conversion rate, strong load capacity, and wide application range.
- Comprehensive Protection: Multiple intelligent security protection functions are integrated.
2. Safety Guidelines and Precautions
Usage Environment Requirements
For optimal safety and performance, ensure the installation environment meets the following conditions:
- Dry Location: Do not immerse the inverter in water or expose it to rain.
- Temperature: Operate in a cool place with a temperature between 0°C and 40°C.
- Ventilation: Do not use the power inverter in a narrow space. Do not cover the machine during use, and ensure good ventilation around the unit.
Important Precautions
- Appliance Startup: When connecting appliances with high startup power (e.g., refrigerator compressors, motors), turn off all electrical switches first. Turn on the inverter, then turn on electrical switches one by one, starting with the highest peak electrical appliance.
- Low Battery Warning: If the battery voltage drops (e.g., 10.4-11.0V for a 12V battery), the inverter will sound an alarm. Disconnect sensitive electrical appliances promptly. The inverter will stop outputting current if the voltage drops further (e.g., 9.7-10.3V for 12V), and the red indicator light will illuminate.
- Battery Maintenance: Start the vehicle or charge the battery in a timely manner to prevent depletion, which can affect vehicle starting and battery life.
- Overvoltage Protection: Although the inverter has overvoltage protection, input voltages exceeding 16V (for a 12V battery) can still damage the unit.
- Heat Management: After continuous use, the surface temperature of the inverter casing may rise to 60°C. Ensure smooth airflow and keep the unit away from objects susceptible to high temperatures.
- Minor Usage: This power inverter is prohibited for use by minors.
3. Main Components
Familiarize yourself with the key parts of your Pure Sine Wave Inverter:


- Indicator Light: Green indicates normal operation; Red indicates protection status (e.g., overvoltage, undervoltage, overload, overheating).
- Universal Shaped Socket: AC output for connecting various appliances.
- Independent Switch: Power ON/OFF switch for the inverter.
- Input Terminal Positive (Red): Connects to the positive terminal of the DC power source.
- Input Terminal Negative (Black): Connects to the negative terminal of the DC power source.
- Efficient Cooling Fan: Automatically activates to dissipate heat and maintain optimal operating temperature.
4. Setup and Connection
Ensure the inverter's input voltage matches your battery's voltage (e.g., 12V inverter for 12V battery). Multiple batteries can be used in parallel.
Connection Method for Battery
This method is suitable for direct connection to a battery for higher power applications.
- Connect the ring lug positive pole (red cable) to the positive terminal of the inverter.
- Connect the ring lug negative pole (black cable) to the negative terminal of the inverter.
- Connect the other ends of the cables to the corresponding terminals of the battery. Ensure all connections are tight.

Connection Method for Car Cigarette Lighters
This method is for low-power electrical appliances (less than 150W) using a car's cigarette lighter socket.
- Ensure your inverter model is equipped with a car-mounted cigarette lighter plug.
- Plug the inverter's cigarette lighter adapter into the vehicle's cigarette lighter socket.
- Connect your electrical appliance to the inverter's AC output.
Note: If the load exceeds 150W, use the direct battery connection method.
Connection Method for Electric Motorcycle
For electric motorcycles, match the inverter's input voltage to the motorcycle's battery voltage (e.g., 48V for four batteries, 60V for five batteries).
- Use a special connecting wire for electric motorcycles.
- Connect the inverter's input terminals to the electric motorcycle's battery terminals, ensuring correct polarity.
- Connect your electrical appliance to the inverter's AC output.

Visual Setup Guide
Watch this video for a step-by-step visual guide on connecting your inverter:
Video: Inverter connection and setup demonstration.
5. Operating Instructions
- Place the inverter switch in the OFF position before connecting it to the battery. Ensure good contact.
- Confirm that the power of all electrical appliances is within the rated power range (50% of the inverter's peak power) and that the peak power of inductive load appliances does not exceed the inverter's peak power. Then, plug the electrical appliance into the 110V/220V AC output socket of the inverter.
- Turn on the switch of the power inverter. The green indicator light should illuminate, indicating normal operation.
- If the red indicator light illuminates, it indicates that the inverter has turned off due to overvoltage, undervoltage, overload, or overheating.
- If the inverter alarms or shuts down due to limited output from the vehicle cigarette lighter socket, start the vehicle or reduce power consumption. Normal operation should resume.
6. Care and Maintenance
- Cleaning: Keep the inverter clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
- Ventilation: Regularly check that the cooling fan and vents are clear of obstructions to ensure proper airflow.
- Connections: Periodically inspect all electrical connections to ensure they are tight and free from corrosion.
- Storage: If storing the inverter for an extended period, ensure it is in a dry, cool place, disconnected from all power sources.
7. Troubleshooting
Refer to the table below for common problems and their solutions:
| Abnormal Phenomenon | Reason | Resolution Method |
|---|---|---|
| Indicator light not on, electrical appliance not working | Battery voltage mismatch, reverse polarity, poor wiring contact | Check battery voltage, check polarity, tighten wiring terminals. If damaged, replace inverter. |
| Indicator light is red, electrical appliance not working | Overload shutdown, high peak power, discharged battery, poor ventilation/overheating, high input voltage | Use lower power appliances, ensure peak power is within inverter limits, charge/replace battery, cool down/improve ventilation, check charging system. |
| Output voltage too low | Measured output voltage of voltmeter is too low | Use a "true RMS multimeter" for accurate data. |
| Inverter emits buzzing alarm sound | Undervoltage or overtemperature protection | Shorten/thicken wires, lower temperature, improve ventilation, reduce appliance usage. |
| Inverter only works for low-power appliances | Current passes through a wire, voltage decays; electrical power consumption exceeds rated power | Reduce wire length, use thicker wires; use a larger capacity battery. |
| Battery usage time is too short | Poor/damaged battery health; fully charged electricity still insufficient | Replace the battery; replace with a better intelligent charger. |
8. Technical Specifications
| Parameter | Value |
|---|---|
| Output Voltage | 110V / 220V |
| Output Frequency | 50Hz, 60Hz |
| Output Waveform | Pure Sine Wave |
| Input Voltage (DC) | 12V (10-14.8V), 24V (108-28V) |
| Peak Power | 1000W / 1600W / 2200W / 3000W / 4000W / 5000W (model dependent) |
| Continuous Power | 500W / 800W / 1100W / 1500W / 1600W / 2000W (model dependent) |
| Built-in Fuse | 10A / 15A / 20A / 40A / 70A / 120A / 240A (model dependent) |
| Under Voltage Alarm | 12V: 10.4-11.0V; 24V: 20.5-22V; 48V: 42-45V; 60V: 54-57V |
| Low Pressure Shutdown | 12V: 9.7-10.3V; 24V: 19.4-20.6V; 48V: 39-42V; 60V: 48-52V |
| Overpressure Shutdown | 12V: 14.5-15.5V; 24V: 29-31V; 48V: 58-62V; 60V: 74-80V |
| No-load Energy Efficiency Data | No-load Current (<0.3A) |
| Conversion Rate | > 90% |
| Size | 28*7*15cm (for some models, may vary) |
| Weight | 1.9 kg (for some models, may vary) |
| Certification | CE |
9. User Tips
- Always ensure the inverter's input voltage (e.g., 12V, 24V) precisely matches the voltage of your battery bank to prevent damage.
- When connecting appliances, especially those with motors or compressors, remember that their startup (peak) power can be significantly higher than their continuous power. Ensure the inverter's peak power capacity can handle these surges.
- This inverter is generally not suitable for high-power inductive loads like induction cookers, microwave ovens, or high-power air conditioners. Consult the seller if you plan to use such appliances.
- If using the inverter with a vehicle's cigarette lighter, be aware of its limited output (typically under 150W). For higher loads, connect directly to the battery.
- To maximize battery life and inverter performance, ensure adequate ventilation and avoid operating in confined spaces. Overheating can trigger protection modes.
- If the inverter repeatedly enters protection mode (e.g., beeping, red light), check for overload, low battery voltage, or overheating. Address these issues before restarting.
10. Warranty and Support
Warranty Terms
This product comes with a Three-year Warranty.
- Product Exchange: Accessories must be complete and not affect secondary sales. Missing accessories may result in deductions based on factory price.
- Product Warranty Application: If the machine encounters quality problems without unauthorized opening or modification, it will be repaired or replaced free of charge. Damage due to unauthorized opening or modification will incur paid maintenance.
- Paid Maintenance: Damage resulting from excessive dirt, age, or harsh environmental use will incur paid maintenance.
- High-Power Machine Casings: Severely scratched, dirty, or old high-power casings should be returned to the factory for repair. Repaired machines within the warranty period will be returned to the customer in their original condition and repaired for free. Modified or unpacked machines will incur paid maintenance.
- After receiving relevant fees, after-sales service will be promptly handled, and the product delivered to the customer by express delivery.
For full details on warranty claims, returns, and exchanges, please contact customer service.
For the complete user manual, you can refer to the User Manual (PDF).
11. Frequently Asked Questions (FAQ)
- Q: What are the distinctive features of the inverter?
- A: The inverter features a pure sine wave output and is available in various power capacities ranging from 1000W to 5000W.
- Q: What are the benefits of using this inverter?
- A: Benefits include CE certification, high output power, a compact size (e.g., 28*7*15cm for some models), and the ability to be customized for specific requirements.
- Q: Why does my 1000W inverter with a 200A battery only load 200W?
- A: This could be due to the appliance's peak power exceeding the inverter's continuous power, or issues with the battery's health or connections. Refer to the troubleshooting section.
- Q: Does the inverter have a charging feature for the battery?
- A: No, this device is an inverter, designed to convert DC power to AC power. It does not have a built-in battery charging feature.
- Q: Is this a pure sine wave inverter?
- A: Yes, all models listed are Pure Sine Wave Inverters.
- Q: Does the socket fit for European plugs?
- A: The inverter features a universal socket, which is commonly used in many countries and should accommodate European plugs.
- Q: What is the continuous power of the 5000W inverter?
- A: The 5000W peak power inverter has a continuous power rating of 2000W.
- Q: Can the 5000W inverter power a 350W deep freezer?
- A: Yes, a 5000W peak inverter (2000W continuous) should be able to power a 350W deep freezer, provided the freezer's startup (peak) power does not exceed the inverter's peak capacity.
- Q: Does it work with LiFePO4 batteries?
- A: Yes, it can work with LiFePO4 batteries as long as the battery's voltage matches the inverter's input voltage (e.g., 12V inverter with 12V LiFePO4 battery).
- Q: What is the weight of the 5000W inverter?
- A: The weight for some models is approximately 1.9 kg, but this may vary slightly by specific model and power rating.
- Q: How many hours does it last giving energy and how many appliances can I connect?
- A: The duration of power supply and the number of appliances you can connect depend entirely on your battery's capacity (Ah) and the total power draw (Watts) of the connected appliances. Higher battery capacity and lower power draw will result in longer run times.
- Q: How do you select between 50Hz and 60Hz?
- A: The output frequency (50Hz or 60Hz) is typically determined by the specific model purchased. Please ensure you select the correct model for your region's frequency requirements.