Midea EU-KFR26G/BP3N1Y-AE.D.11.NP1-1

Contents

Midea Air Conditioner Indoor Unit Control Board

Model: EU-KFR26G/BP3N1Y-AE.D.11.NP1-1

Instruction Manual

Introduction

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your new Midea Air Conditioner Indoor Unit Control Board. This PCB (Printed Circuit Board) is a replacement part designed to restore the full functionality of your Midea indoor air conditioning unit. Please read these instructions carefully before proceeding with installation or any service.

Specifications

FeatureDetail
Item NameAir Conditioner Control Board
BrandMidea
Part NumberEU-KFR26G/BP3N1Y-AE.D.11.NP1-1, 17122000016771
TypePCB (Printed Circuit Board), Air Conditioner Parts
ApplicationHome Air Conditioning Units
CertificationCE
OriginMainland China
ElectricNo (Passive component)
High-concerned chemicalNone
Package Dimensions (L x W x H)30 cm x 20 cm x 10 cm
Package Weight0.5 kg

Setup and Installation

WARNING: Installation should only be performed by a qualified technician. Disconnect all power to the air conditioning unit before attempting any installation or service to prevent electric shock or damage to the unit.

  1. Power Disconnection: Ensure the main power supply to the air conditioning unit is completely disconnected at the circuit breaker. Verify with a voltage tester.
  2. Access the Indoor Unit: Open the indoor unit casing to gain access to the existing control board.
  3. Document Connections: Before disconnecting any wires, take clear photos or make detailed diagrams of all existing wire connections to the old control board. Pay close attention to the color coding and connector types.
  4. Remove Old Board: Carefully disconnect all wires and mounting screws securing the old control board.
  5. Install New Board: Position the new control board in the same location as the old one. Secure it with the appropriate screws.
  6. Connect Wiring: Using your documented photos/diagrams, carefully reconnect all wires to the corresponding terminals on the new control board. Ensure all connectors are fully seated and secure.
  7. Visual Inspection: Double-check all connections for correctness and security. Ensure no loose wires or foreign objects are present.
  8. Close Unit: Carefully close the indoor unit casing.
  9. Restore Power: Reconnect the main power supply to the air conditioning unit.

Visual Reference:

Top-down view of the Midea AC indoor unit control board, showing various components and connectors.
Figure 1: Top-down view of the control board, highlighting component layout and connection points.
Close-up view of a section of the Midea AC control board, detailing various connectors and integrated circuits.
Figure 2: Close-up of the board, showing specific connectors (e.g., CN12, CN18, CN27) and integrated circuits.

Operation

The Midea Air Conditioner Indoor Unit Control Board is an internal component responsible for managing the various functions of the indoor unit. Once correctly installed, it operates automatically in conjunction with the outdoor unit and the user's remote control or wall-mounted thermostat. It controls fan speeds, temperature regulation, mode selection (cooling, heating, fan, dry), and other operational parameters based on user input and sensor readings.

There are no direct user-operable controls on the PCB itself. All operational commands are received from the air conditioner's user interface.

Maintenance

As an electronic component, the control board requires minimal maintenance. However, adhering to general best practices for electronic devices can prolong its lifespan:

  • Keep Dry: Ensure the indoor unit environment remains dry and free from moisture or condensation, which can damage electronic components.
  • Cleanliness: Periodically, during routine air conditioner servicing, ensure the area around the control board is free from dust and debris. Use a soft brush or compressed air to gently clean the board if necessary, ensuring power is disconnected.
  • Avoid Physical Damage: Handle the board with care during installation or any service. Avoid bending, dropping, or applying excessive force.
  • Professional Inspection: Have your air conditioning unit professionally inspected and serviced regularly. This can help identify potential issues before they lead to control board failure.

Troubleshooting

If your air conditioning unit is not functioning correctly after replacing the control board, consider the following troubleshooting steps:

  • No Power: If the unit does not power on, first check the main power supply and circuit breaker. Then, verify all power connections to the control board are secure and correctly wired.
  • Incorrect Functionality: If the unit powers on but specific functions (e.g., fan, cooling, heating) are not working, re-check all signal and sensor wire connections. Ensure they match your original documentation.
  • Missing Connectors: A common issue can be a missing or improperly connected sensor. For example, if a blue connector for a temperature sensor is missing or not properly seated, the unit may not operate correctly or display an error. Ensure all necessary sensors are connected.
  • Error Codes: If the unit displays an error code, consult your air conditioner's main user manual for the meaning of the code and recommended actions.
  • Professional Assistance: If troubleshooting steps do not resolve the issue, it is highly recommended to contact a qualified HVAC technician for diagnosis and repair.

User Tips

  • Verify Model Compatibility: Always confirm the exact model number of your air conditioner and the control board before purchase and installation to ensure compatibility.
  • Check All Connectors: During installation, pay extra attention to all connectors. A user reported a missing blue connector for a temperature sensor, which is crucial for proper operation. Ensure all sensor connectors are present and securely attached.
  • Document Everything: Taking photos or making diagrams of the original wiring before disassembly can save significant time and prevent errors during reassembly.

Warranty and Support

This Midea Air Conditioner Indoor Unit Control Board comes with a 3-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal operating conditions.

For warranty claims, technical support, or if the product does not work as expected, please contact the seller or a certified service center. It is advisable to have your product details, including the part number and purchase date, ready when seeking support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.