HORACO ZX902-AFG-82N

Contents

HORACO 8+2 Port Gigabit PoE Switch User Manual

Model: ZX902-AFG-82N

Brand: HORACO

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your HORACO 8+2 Port Gigabit PoE Switch (Model: ZX902-AFG-82N). This high-performance switch is designed to provide reliable and efficient network connectivity, featuring 8 Gigabit PoE Ethernet ports and 2 Gigabit Uplink Ethernet ports, with a total PoE power budget of 96W. It supports various working modes and is compatible with both PoE and non-PoE devices, making it suitable for a wide range of networking applications.

2. Safety Information

Please read and understand all safety instructions before operating the device. Keep this manual for future reference.

  • Ensure the power supply voltage matches the requirements specified on the device label (AC INPUT 100-240V).
  • Do not open the device casing. There are no user-serviceable parts inside.
  • Avoid exposing the device to water, moisture, or extreme temperatures (operating range: -10°C to 50°C).
  • Place the device on a stable, flat surface with adequate ventilation.
  • Disconnect the power cable before cleaning or moving the device.
  • Use only the provided power cord.

3. Package Contents

Verify that all items are present in your package:

  • HORACO 8+2 Port Gigabit PoE Switch: 1 PC
  • Power Cord: 1 PC
  • User Manual: 1 PC
  • Certificate: 1 PC
Packing List for HORACO 8+2 Port Gigabit PoE Switch

Image: Packing list and product parameters table.

4. Product Overview

The HORACO ZX902-AFG-82N is a 10-port Gigabit PoE switch designed for robust network solutions. It features a durable all-steel shell material, adapting to complex environments.

Front Panel

Front panel of HORACO 8+2 Port Gigabit PoE Switch with port labels

Image: Front view of the switch showing 8 PoE ports (1-8), 2 Uplink ports (9-10), PWR LED, and a mode switch.

  • Ports 1-8: 10/100/1000M PoE Ethernet Ports. These ports provide both data and power to PoE-compatible devices (IEEE802.3af/at).
  • Ports 9-10: 1000M Ethernet Uplink Ports. These are standard Gigabit Ethernet ports for connecting to a router, NVR, or other network devices.
  • PWR LED: Power indicator.
  • Mode Switch: A three-position switch to select between VLAN, Default, and Extend operating modes.

Rear Panel

Rear panel of HORACO 8+2 Port Gigabit PoE Switch with AC input

Image: Rear view of the switch showing the AC INPUT (100-240V) power socket.

  • AC INPUT (100-240V): Power input for the switch.

5. Setup

The HORACO PoE Switch is designed for simple plug-and-play operation. No complex configuration is required for basic functionality.

  1. Connect to Power

    Connect the provided power cord to the AC INPUT port on the rear panel of the switch and then plug it into a standard AC power outlet (100-240V). The PWR LED on the front panel should illuminate.

  2. Connect Network Devices

    Connect your network devices to the appropriate ports:

    • PoE Devices (e.g., IP Cameras, IP Phones, Wireless APs): Connect these devices to any of the 8 Gigabit PoE Ethernet Ports (1-8). The switch will automatically detect and provide power to these devices.
    • Non-PoE Devices (e.g., Routers, NVRs, Computers): Connect these devices to the 2 Gigabit Uplink Ethernet Ports (9-10) or use a PoE splitter for non-PoE devices connected to PoE ports (see Compatibility section).
  3. Enjoy

    Your network is now ready. The switch will automatically handle data forwarding and power delivery.

Plug and Play setup steps: Connect to Power, Connect Devices, Enjoy

Image: Visual guide for the simple plug-and-play setup process.

6. Operating Modes

The switch features a three-speed one-button intelligent dial switch on the front panel, allowing you to select between different operating modes to suit your network needs.

Diagram showing VLAN, Default, and Extend operating modes

Image: The three working modes: VLAN, Default, and Extend, with a magnifying glass highlighting the mode switch.

  • VLAN Mode (Extend 1-8)

    In VLAN mode, ports 1-8 are isolated from each other, preventing broadcast storms and enhancing network security. All ports (1-8) can communicate with the uplink ports (9-10).

  • Default Mode

    This is the standard operating mode where all ports function as a regular switch, allowing full communication between all connected devices.

  • Extend Mode (Extend 7-8)

    In Extend mode, the transmission distance for ports 7 and 8 is extended, typically up to 250 meters, but the speed for these extended ports will be reduced to 10Mbps. This is useful for long-distance PoE deployments.

7. Universal Compatibility

The HORACO PoE Switch offers broad compatibility with various network devices, supporting both Power over Ethernet (PoE) and non-PoE equipment.

PoE Devices

Directly connect and power devices compliant with IEEE802.3af/at standards:

  • IP Cameras
  • IP Phones
  • PTZ Cameras
  • Wireless Access Points (APs)

Non-PoE Devices

Connect standard network devices that do not require power over Ethernet:

  • Routers
  • Network Video Recorders (NVRs)
  • Computers
Diagram showing multiple compatibility scenarios for PoE and non-PoE devices

Image: Visual representation of connecting PoE cameras directly, non-PoE cameras with a PoE splitter, and non-PoE cameras with a separate power supply.

Connection Cases for Cameras:

  • Case 1 (PoE Camera): Connect the PoE camera directly to a PoE port (1-8) on the switch. The switch provides both data and power.
  • Case 2 (Non-PoE Camera with PoE Splitter): Connect the non-PoE camera to a PoE splitter, then connect the splitter to a PoE port (1-8) on the switch. The splitter separates power and data for the non-PoE camera.
  • Case 3 (Non-PoE Camera with Separate Power): Connect the non-PoE camera to a standard Ethernet port (9-10) or a PoE port (1-8) without using its PoE function, and power the camera using its dedicated power adapter.

8. Specifications

Below are the detailed technical specifications for the HORACO ZX902-AFG-82N PoE Switch:

Product Parameters table for HORACO 8+2 Port Gigabit PoE Switch

Image: Detailed product parameters table.

Feature Description
Product Name 10 Port Gigabit Standard PoE Switch
Model ZX902-AFG-82N
Port Definition 8* 10/100/1000M PoE Ports + 2* 1000M Ethernet Ports
Network Protocol IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x
PoE Protocol IEEE802.3af (15.4W), IEEE802.3at (30W)
Switch Type Gigabit Switch
Transmission Rate 10/100/1000Mbps
Switching Capacity 20Gbps
Packet Forwarding Rate 14.88Mpps
Communication Mode Full-Duplex & Half-Duplex
Memory Cache 448K
MAC Address Table 2K
Jumbo Frame 2048bytes
Transfer Mode Store and forward
MTBF (Mean Time Between Failures) 100,000 hours
Power AC INPUT (100-240V), Power Supply: 52V 1.85A (96W)
Network Medium 10Base-T: Cat3, 4, 5 or above UTP (≤100m)
100Base-TX: Cat5 or above UTP (≤100m)
1000Base-TX: Cat5 or above UTP (≤100m)
Product Dimensions (L×W×H) 200mm × 118mm × 44mm
Package Dimensions (L×W×H) 245mm × 190mm × 60mm
Net Weight 0.69KG
Product Gross Weight 0.97KG
Working Temperature -10°C to 50°C
Storage Temperature -40°C to 70°C
Working Humidity 10%~90%, non-condensing
Storage Humidity 5%~90%, non-condensing
Certification CE, FCC, RoHS
Dimensions of HORACO 8+2 Port Gigabit PoE Switch

Image: Product dimensions (200mm x 118mm x 44mm).

9. Maintenance

To ensure optimal performance and longevity of your HORACO PoE Switch, follow these maintenance guidelines:

  • Environmental Conditions: Operate the switch within the specified working temperature (-10°C to 50°C) and humidity (10%~90% non-condensing) ranges. Avoid extreme cold or heat, as well as high humidity.
  • Cleaning: Regularly clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.
  • Ventilation: Ensure proper airflow around the device. Do not block the ventilation holes. The all-steel shell material is designed to adapt to complex environments, but good airflow is still crucial.
  • Firmware Updates: Check the manufacturer's website periodically for any available firmware updates. Follow the provided instructions carefully for any update procedures.
Image showing the HORACO switch adapting to temperatures from 0°C to 40°C

Image: The switch's robust design for various temperature environments (0°C to 40°C).

10. Troubleshooting

If you encounter issues with your HORACO PoE Switch, refer to the following common problems and solutions:

  • No Power / PWR LED Off

    Solution: Ensure the power cord is securely connected to both the switch and a working power outlet. Verify the power outlet is functional. Try a different power cord if available.

  • No Network Connectivity

    Solution: Check all Ethernet cable connections. Ensure cables are securely plugged into the correct ports. Verify that the connected devices are powered on and functioning correctly. Check the status of the mode switch (VLAN, Default, Extend) to ensure it's set appropriately for your network configuration.

  • PoE Device Not Receiving Power

    Solution: Ensure the device is PoE-compatible (IEEE802.3af/at). Check the Ethernet cable for damage. Try connecting the PoE device to a different PoE port. Verify the total power consumption of all connected PoE devices does not exceed the switch's 96W power budget.

  • Slow Network Speed

    Solution: Check if the switch is in Extend mode, which reduces speed to 10Mbps for ports 7-8. Ensure all network cables are Cat5e or higher for Gigabit speeds. Verify that connected devices are capable of Gigabit speeds.

  • Network Loop / Broadcast Storm

    Solution: If you suspect a network loop, switch to VLAN mode to isolate ports and prevent broadcast storms. Ensure your network topology does not create unintended loops.

11. User Tips

  • PoE Voltage: The switch supports IEEE802.3af (15.4W) and IEEE802.3at (30W) PoE standards, which typically deliver power in the 48-57V range. This means it can deliver the necessary 48V for compatible PoE devices.
  • Cable Quality: For optimal performance, especially with Gigabit speeds and PoE, use high-quality Cat5e or Cat6 Ethernet cables.
  • Mode Selection: Utilize the VLAN mode to enhance security and prevent network issues in larger or more complex setups. Use Extend mode only when long-distance transmission is critical and a 10Mbps speed reduction is acceptable for specific devices.
  • Power Budget Management: Keep track of the power requirements of your PoE devices to ensure the total consumption does not exceed the switch's 96W budget.

12. Warranty and Support

HORACO provides a comprehensive warranty and technical support for your product.

  • Warranty: This product comes with a 2-year free warranty from the date of purchase.
  • Technical Support: Lifetime professional technical support is available for all HORACO products.
  • Contact: For technical assistance, warranty claims, or any product-related inquiries, please contact HORACO customer service through the official channels provided at the point of purchase or on the HORACO official website.
Certifications for HORACO products including CCC, Test Verification, and FCC

Image: Brand Qualification and Quality Assurance certificates (CCC, Test Verification of Conformity, FCC Supplier's Declaration of Conformity).

© 2024 HORACO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.