FENVI 300Mbps Wireless WiFi Repeater User Manual

1. Introduction and Overview

The FENVI 300Mbps Wireless WiFi Repeater is designed to extend the coverage of your existing Wi-Fi network, eliminate dead zones, and provide a strong, stable internet connection throughout your home or small office (Soho). This device supports the 802.11n standard, offering high-speed data transmission up to 300Mbps on the 2.4GHz frequency band. It features multiple working modes, including Repeater and AP (Access Point) modes, and incorporates a firewall function for enhanced network security. Its wall-mount design ensures easy installation and portability.

2. Package Contents

Please check the package for the following items:

• 1 x FENVI 300Mbps Wireless WiFi Repeater
• 1 x User Manual (this document)

3. Specifications

4. Setup Guide

The FENVI WiFi Repeater offers a simple setup process. Follow these steps to extend your Wi-Fi network:

4.1 Functional Breakdown

• Power LED (Blue): Indicates power status.
• WPS/RST Button: Used for WPS setup or factory reset.
• LAN Port: For wired connections.
• WAN/LAN Port: Functions as either WAN or LAN depending on the mode.
• Power Plug: Connects to a power outlet.
• Signal LED (Blue): Indicates Wi-Fi signal strength.
• WPS LED (Blue): Indicates WPS activity.
• Power Switch: Turns the device on/off.

4.2 Connection Guide (Repeater Mode)

1. Plug In: Plug the repeater into a power socket.
2. Wait for Power On: Wait for the Power LED and WiFi signal light to turn on.
3. Connect to Repeater WiFi: On your phone or computer, connect to the repeater's default Wi-Fi network (e.g., "Wireless-N").
4. Access Web Interface: Open a web browser (e.g., Chrome, Firefox) and enter the IP address 192.168.10.1 or 10.10.10.254 in the address bar.
5. Log In: Enter the default password "admin" to log in to the management page.
6. Select Mode: Choose "Repeater Mode" from the available options.
7. Select Network: The repeater will scan for available Wi-Fi networks. Select your home Wi-Fi network from the list.
8. Enter Password: Enter the password for your home Wi-Fi network.
9. Apply Settings: Click "Apply" or "Confirm" to save the settings.
10. Restart: The repeater will restart to apply the new configuration.
11. Reconnect: After the repeater restarts, reconnect your devices to the new extended network. The network name will typically be your original Wi-Fi name followed by "_EXT" (e.g., "YourWiFiName_EXT").

5. Operating Modes

The FENVI WiFi Repeater supports two primary operating modes:

5.1 Repeater Mode

In Repeater Mode, the device extends the range of your existing Wi-Fi network wirelessly. It receives the signal from your main router and re-broadcasts it, effectively expanding your Wi-Fi coverage to areas with weak or no signal. This mode is ideal for eliminating Wi-Fi dead zones without the need for additional cabling.

5.2 AP (Access Point) Mode

In AP Mode, the device connects to your modem or router via an RJ45 Ethernet cable and creates a new Wi-Fi hotspot. This allows you to share a wired internet connection wirelessly, providing a separate network for your devices. This mode is useful for creating a new Wi-Fi network in an area where only a wired connection is available, or for keeping your private Wi-Fi network separate.

5.3 Wired Connection (LAN Port)

The device also features a LAN port, allowing you to connect a wired device (like a desktop computer, gaming console, or smart TV) directly to the repeater for a stable, high-speed internet connection.

6. Troubleshooting

If you encounter issues with your FENVI WiFi Repeater, refer to the following common problems and solutions:

6.1 Cannot Connect to Internet After Setup

• Password Mismatch: Ensure you entered the exact same password as your main router's Wi-Fi.
• Special Characters: If your router's Wi-Fi password contains special characters (e.g., *, &, ^, %, $, #, @, !), the repeater might not identify them correctly. Change your router password to one without special characters and try again.
• Factory Reset: If issues persist, reset the repeater to factory defaults and reconfigure.

6.2 How to Reset the Repeater

With the repeater powered on, press and hold the Reset button (not the WPS button) for approximately 10 seconds. The device will restart with factory default settings.

6.3 Cannot Access the Repeater's Web Management Page

• Network Connection: Make sure your computer or mobile device is connected to the repeater's extended network (or its default "Wireless-N" network if setting up).
• Automatic IP: Ensure your computer is set to obtain an IP address automatically (DHCP).
• Router's DHCP Client List: If the repeater is already connected to your main router, check your router's DHCP client list to find the repeater's current IP address. Use this IP address to access the management page.
• Reset: If all else fails, perform a factory reset on the repeater.

6.4 Wireless Transmission Rate is Slower

Due to the nature of wireless transmission protocols, repeater devices operate in half-duplex mode. This means the repeater processes communication between your main router and client devices sequentially, which can effectively double the transmission time and reduce the overall speed compared to a direct connection to the main router. It is recommended to use the extender when your direct home network connection is poor or when you need a larger wireless coverage to eliminate 'dead zones', rather than for maximizing raw speed.

6.5 Devices Connected to Repeater Cannot Get IP Address or Access Internet

• Router Security Settings: Check your main router for enabled wireless MAC filtering, wireless access control, or Access Control List (ACL). Log into your router and temporarily disable these features.
• Repeater Connection: Ensure the repeater has successfully connected to your main router. If not, reset the repeater and reconfigure it.
• IP Address Conflict/Limit: The IP address of the router might be occupied, or the number of wireless devices connected by the router may have reached its limit. Reboot your main router, then reset and reconfigure the repeater.

7. User Tips

• Optimal Placement: Place the repeater halfway between your router and the area where you need improved Wi-Fi coverage. Avoid placing it near large metal objects, concrete walls, or other electronic devices that may cause interference.
• Avoid Overuse: To prolong the life of the repeater, avoid continuous operation for extended periods (more than 24 hours). If not in use, unplug it from the power supply.
• Password Simplicity: When setting up, if your router's Wi-Fi password contains complex special characters, consider temporarily changing it to a simpler one without such characters for easier repeater configuration. You can change it back after the repeater is successfully set up.
• Speed Expectations: Understand that a repeater's primary function is to extend coverage, not necessarily to increase maximum speed. The effective speed through a repeater may be lower than a direct connection to the main router due to half-duplex operation.

8. Maintenance

• Cleaning: Keep the device clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid or aerosol cleaners.
• Ventilation: Ensure the repeater is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
• Power Cycle: If the device becomes unresponsive or experiences performance issues, try unplugging it from the power outlet for 10 seconds and then plugging it back in.
• Firmware Updates: Periodically check the manufacturer's website for any available firmware updates to ensure optimal performance and security.

9. Warranty and Support

The FENVI 300Mbps Wireless WiFi Repeater comes with a 2-year warranty. For technical support or warranty claims, please contact the fenvi Official Store or refer to the contact information provided with your purchase documentation.

Additional services include:

• Fast Delivery Guarantee: If delivery is delayed, a coupon code may be provided. Refunds are available for lost or damaged packages, or if no delivery occurs within 30 days.
• Security & Privacy: Your personal details are kept safe and secure, and not shared with third parties without consent.