1. Introduction
The COOLMOON ARGB Controller is designed to enhance your PC case aesthetics and cooling performance. It features a multi-interface design for connecting numerous ARGB fans and supports intelligent temperature control via PWM. With its smart remote control, you can customize lighting effects and fan speeds, or synchronize with compatible motherboards for a unified lighting experience.
2. Package Contents
Please check the box for the following items:
- 1 x ARGB Controller
- 1 x Remote Control
- 1 x PWM Control Cable
- 1 x SATA Power Cable
- 1 x Motherboard Sync Cable

3. Specifications
| Attribute | Value |
|---|---|
| Brand Name | VODOOL (COOLMOON) |
| Model Number | ARGB Controller |
| Type | Light Controller/HUB |
| Package | Yes |
| High-concerned chemical | None |
| Origin | Mainland China |
| Certification | NONE |
| Product Size | 118 x 55 x 24mm (4.65 x 2.17 x 0.94 inches) |
| Interface | 8x 4PIN (PWM) + 10x 3PIN (ARGB Interface) |
4. Setup Instructions
Important: Always ensure your PC is powered off and unplugged from the wall socket before installing or connecting any components to prevent damage to the device or other hardware.
- Mounting the Controller: The controller features a magnetic bottom design for easy installation inside your PC chassis. Simply place it on any metallic surface within your case.
- Connecting Fans: Connect your PC cooling fans to the 4PIN (PWM) interfaces for fan speed control and the 3PIN (ARGB) interfaces for addressable RGB lighting. The controller supports up to 8 PWM fans and 10 ARGB devices.
- Power Connection: Connect the provided SATA Power Cable from your power supply unit (PSU) to the controller's SATA power input.
- Motherboard Synchronization (Optional): If your motherboard supports 5V ARGB AURA synchronization (e.g., ASUS, MSI, Gigabyte, ASRock), connect the Motherboard Sync Cable from the controller to the 5V 3-pin ARGB header on your motherboard. This allows your motherboard software to control the lighting effects.
- Restart Button Connection (Optional): Connect your case's restart button cable to the controller's restart interface if you wish to use it to cycle through lighting modes.


5. Operating Instructions
The COOLMOON ARGB Controller offers two primary modes of operation: Remote Control Mode and Motherboard Synchronization Mode.
5.1 Remote Control Mode
Use the included wireless remote control to manage your fan lighting and speed. The remote offers over 360 lighting effects and various customization options.

- Power Button: Turn the lighting on/off.
- Speed +/-: Adjust the speed of dynamic lighting effects.
- Mode +/-: Cycle through different lighting modes and effects.
- R/M Button: Switch between Remote Control Mode and Motherboard Sync Mode.
- Color Buttons (R, G, B, White, etc.): Select static colors.
- Brightness Buttons (Sun icon +/-): Adjust the brightness of the lighting.
Note: If your motherboard does not support 5V synchronization, the remote control mode provides extensive customization options.
5.2 Motherboard Synchronization Mode
If you have connected the Motherboard Sync Cable to a compatible 5V 3-pin ARGB header on your motherboard, you can control the lighting effects through your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). Press the R/M button on the remote to switch to this mode.
6. User Tips
- Always ensure the PC is powered off before connecting or disconnecting any cables to the controller to prevent short circuits or damage.
- Experiment with both remote control and motherboard sync modes to find the lighting effects that best suit your setup.
- The magnetic base allows for flexible placement within your PC case, making cable management easier.
7. Maintenance
- Keep the controller and remote control clean by wiping them with a dry, soft cloth.
- Avoid exposing the devices to moisture or extreme temperatures.
- Do not attempt to open or repair the controller or remote control, as this will void any potential warranty.
8. Troubleshooting
- Lights not working: Ensure all ARGB cables are securely connected to the controller and the controller is receiving power via the SATA cable. Check if the remote control's battery is functional.
- Fans not spinning or incorrect speed: Verify that the 4PIN PWM cables are correctly connected to the controller and the fans. Ensure the SATA power cable is properly connected.
- Motherboard sync not working: Confirm that the 5V 3-pin ARGB sync cable is correctly connected to both the controller and the motherboard's ARGB header. Check your motherboard's RGB software settings to ensure the controller is detected and enabled.
- Remote control unresponsive: Check the battery in the remote control. Ensure there are no obstructions between the remote and the controller.
9. Warranty and Support
For any issues not covered in this manual, or for warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.