Important Safety Information
- Always fully charge the battery before use. It is advised to charge at least 4 hours.
- Use the standard Type-C cable and 5Vdc, 2A charger plug to charge.
- It is recommended to power off the camera manually for stable & quick charging.
- Do not expose the camera or battery to high/low-temperature environments. If the battery leaks or bulges, stop using it immediately. Risk of explosion if the battery is placed by an incorrect type.
- Never replace the battery on your own. It may cause damage or an explosion. Please contact customer support if the battery has any problem.
- Do not expose the LCD or lens to direct sunlight.
- Never dismantle, crush, or pierce the product, or allow it to short-circuit. Seek professional assistance if the product doesn't work properly.
- If you do not use the camera for extended periods, charge it periodically to prevent battery damage.
- Maintenance: To clean the lens and both LCD screens, wipe with a soft, lint-free cloth. Do not insert foreign objects around the lens. Do not use liquids.
Product Overview
The BOBLOV M7 Pro is a compact body-worn camera designed for reliable video, photo, and audio recording. It features a 180° rotatable lens, GPS functionality, and night vision capabilities.

Figure 1: Front and back view of the BOBLOV M7 camera.

Figure 2: Key features of the BOBLOV M7 GPS Body Camera: Rotatable Lens, GPS Enabled, 15Hrs Record, Night Vision, 4000mAh Battery.
Structure Diagram
Familiarize yourself with the camera's components:
- Working Indicator Light ①
- Working Indicator Light ②
- Blue Flash Light
- Red Flash Light
- Four IR Lights
- Image Sensor
- White Light
- Microphone
- Speaker Output
- Big Front Video Button
- 180° Rotatable Lens
- Reset Button
- Menu / OK / Confirm Button
- Up Button / Video Lock / Rewind
- Down Button/Playback Button / Fast Forward
- Return Button
- Type-C Charging Port
- IR Active Button / White Light Active Button
- Power Button
- Photo Button / Red-Blue Alarm Active Button
- Video Button
- Audio Button
Setup Guide
1. Charging the Camera
Use the standard Type-C cable and a 5Vdc, 2A charger plug. The M7 Pro body camera takes approximately 4 hours to fully charge with the provided fast charger. When connected to power, the camera may boot automatically; manually power it off for charging.

Figure 3: BOBLOV M7 camera charging, indicating 4 hours charging time, 15 hours recording time, and 5V/2A power supply.
Charging Indicator: Working Indicator Light ① will show a steady blue light while charging and turn off when fully charged.
2. Power On/Off and Standby Mode
- Power On/Off: Long press the Power Button (
) to boot. Long press again to power off. - Standby Mode/Screen Save: In power-on state, Working Indicator Light ① stays green. In standby, short press the Menu/OK button to enter settings. If 'Screen Saver' is enabled, the screen will turn off after 1/3/5 minutes of inactivity. Tap any button to light up the display.
3. 180° Rotatable Lens
The M7 Pro camera lens supports 180 degrees of manual rotation. The screen's image will automatically adjust its orientation when the lens is rotated in standby or video mode.

Figure 4: BOBLOV M7 camera showing its 180-degree rotatable lens at 0°, 90°, and 180° positions.
Note: Do NOT rotate the lens more than 180 degrees, as this may damage the lens or internal cables.
4. Connecting to a Computer
Connect the camera to your computer using the provided USB cable. The camera will enter USB disk mode, displaying