1. Introduction
This manual provides essential instructions for the installation, operation, and maintenance of your XGEDA TP.SK516S.PB802 LCD TV Motherboard. This network intelligent WiFi dual-core motherboard is designed to ensure optimal performance for compatible LCD TV models, such as the AVA 40” UA40S6000. Please read this manual thoroughly before proceeding with any installation or operation.
2. Important Notes Before Installation
Please read the following carefully to ensure proper product usage and avoid potential issues:
- Compatibility Check: Before purchasing or installing, carefully verify that the motherboard model (TP.SK516S.PB802) and your TV's machine model are compatible. Incorrect matching may lead to malfunction.
- Quality Assurance: All products undergo rigorous testing by professional technicians and are confirmed to be in good working condition before dispatch.
- Shipping Damage: While products are tested before shipping, if you receive a faulty product due to damage during transit, please inform customer service immediately upon receipt.
For any uncertainties or questions, please contact customer service for assistance.
3. Setup and Installation
3.1 Identifying TV Components
Before replacing your motherboard, it is crucial to correctly identify the existing components within your TV. Refer to the diagram below for guidance:

3.2 Physical Installation
Due to the technical nature of motherboard replacement, professional installation is highly recommended. Ensure the TV is disconnected from all power sources before beginning. Carefully remove the back panel of your TV and locate the existing motherboard. Disconnect all cables and fasteners, then replace it with the new TP.SK516S.PB802 motherboard, ensuring all connections are secure and correctly seated. Reassemble the TV panel.
3.3 Initial Power-Up and Network Connection
After physical installation, connect your TV to a power source and turn it on. The TV should boot up to its main interface. To utilize the network intelligent features, you will need to connect the TV to your wireless network. The following video demonstrates the Wi-Fi connection process:
4. Operation
Once installed and connected, your TV will operate as a smart TV with network capabilities. Navigate the interface using your TV remote control. The dual-core processor ensures smooth performance for streaming, app usage, and general TV functions. Refer to your TV's original user manual for specific instructions on navigating the smart TV interface and using pre-installed applications.
5. Maintenance
The TP.SK516S.PB802 motherboard requires minimal maintenance. Keep the TV environment clean and free from dust to prevent overheating and component damage. Avoid exposing the TV to excessive moisture or extreme temperatures. There are no user-serviceable parts on the motherboard; any internal issues should be addressed by qualified technicians.
6. Troubleshooting
- TV Does Not Power On: Double-check all power connections to the TV and ensure the motherboard is correctly seated and all internal cables are securely connected.
- No Picture/Sound: Verify that all display and audio cables are properly connected to the motherboard and the TV panel. Ensure the correct input source is selected.
- Wi-Fi Connection Issues: If the TV cannot connect to Wi-Fi, ensure the network password is correct and the Wi-Fi signal is strong. Refer to the network connection video in Section 3.3 for guidance.
- Unusual Behavior: If the TV exhibits unexpected behavior, try performing a factory reset through the TV's settings menu (refer to your TV's original manual). If problems persist, contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | TP.SK516S.PB802 |
| Product Type | TFT LCD TV Motherboard |
| Origin | Mainland China |
| Chemical Content | None (Hign-concerned Chemical) |
| Package Length | 34 cm |
| Package Width | 24 cm |
| Package Height | 7 cm |
| Package Weight | 0.2 kg |
8. User Tips
No specific user tips are available from customer reviews or Q&A at this time. General advice for maintaining your TV's performance includes ensuring proper ventilation around the TV to prevent overheating and regularly checking for software updates if your TV model supports them.
9. Frequently Asked Questions (FAQ)
No specific frequently asked questions are available at this time. For any technical inquiries or support, please refer to the 'Warranty and Support' section below.
10. Warranty and Support
The seller, XGEDA Professional LCD Accessories Store, has 18 years of experience in LCD accessories. If you encounter any problems or have questions regarding the product, please contact their customer service for consultation and support. They are committed to helping you solve any issues.
For general inquiries or assistance, please reach out to the seller directly.