ZUOYI LM67

Contents

LM67 Hot Swap Mechanical Keyboard Kit User Manual

Model: LM67 | Brand: ZUOYI

1. Introduction

Thank you for choosing the ZUOYI LM67 Hot Swap Mechanical Keyboard Kit. This kit is designed for enthusiasts who appreciate customization, offering a gasket structure, multi-mode connectivity (Bluetooth 5.0, 2.4G Wireless, and Type-C wired), vibrant RGB backlighting, and hot-swappable switch sockets compatible with 3-pin and 5-pin switches from brands like Cherry, Gateron, and Kailh. The keyboard features durable double-shot PBT keycaps with a fine frosting texture and a compact 63-key layout.

LM67 Keyboard Kit Features Overview
Overview of LM67 features including three connection methods, wire separation, lubricated stabilizers, RGB backlight, PBT keycaps, hot-swap functionality, macro software, musical rhythm mode, and compact layout.

2. Package Contents

The LM67 Hot Swap Mechanical Keyboard Kit typically includes:

  • LM67 Keyboard Barebones Kit (case, PCB, plate, stabilizers)
  • USB Type-C Cable
  • 2.4G Wireless Receiver
  • Switch Puller (for hot-swap sockets)
  • Keycap Puller
  • User Manual (this document)

Note: Switches and keycaps are often sold separately or as part of specific bundles. Please check your order details.

3. Setup Guide

3.1 Installing Switches

The LM67 features hot-swappable sockets, allowing you to install and remove switches without soldering. It supports both 3-pin and 5-pin mechanical switches.

  1. Prepare Switches: Ensure your chosen mechanical switches are compatible (e.g., Cherry, Gateron, Kailh, Outemu).
  2. Align Pins: Carefully align the pins of the switch with the holes on the PCB. Ensure the pins are straight to avoid bending.
  3. Press Firmly: Gently press the switch into the socket until it clicks into place. Do not force it if there is resistance; re-check pin alignment.
  4. Repeat: Install all desired switches into the keyboard PCB.
LM67 Keyboard PCB (Black) for switch installation LM67 Keyboard PCB (Green) for switch installation
LM67 keyboard PCBs (black and green versions) showing the hot-swap sockets where switches are installed.

3.2 Installing Keycaps

Once switches are installed, you can place your keycaps.

  1. Align Keycap: Position the keycap over the stem of the switch.
  2. Press Down: Gently press the keycap down until it is securely seated on the switch stem.
  3. Repeat: Install all keycaps according to your preferred layout.
Assembled LM67 Keyboard Kit with Keycaps
An assembled LM67 keyboard kit with keycaps installed, ready for use.

3.3 Connecting the Keyboard

The LM67 supports three connection modes: Wired (Type-C), 2.4G Wireless, and Bluetooth 5.0. It is compatible with Desktop, Laptop, and Tablet devices running Windows or Apple operating systems.

LM67 Keyboard Connection Methods and Compatibility
Image illustrating the three connection methods (Bluetooth 5.0, 2.4G Wireless, Type-C wired) and compatibility with Windows and Apple devices.

3.3.1 Wired Connection

  • Connect the provided USB Type-C cable to the keyboard's Type-C port and the other end to your computer's USB port.
  • The keyboard will be automatically recognized and ready for use.

3.3.2 2.4G Wireless Connection

  • Locate the 2.4G wireless receiver (usually stored in a compartment on the keyboard).
  • Plug the receiver into an available USB port on your computer.
  • Switch the keyboard to 2.4G mode (refer to the keyboard's function keys or switch for mode selection).
  • The keyboard should connect automatically.

3.3.3 Bluetooth Connection

  • Switch the keyboard to Bluetooth mode (refer to the keyboard's function keys or switch for mode selection).
  • On your device (computer, laptop, tablet), go to Bluetooth settings and enable Bluetooth.
  • Search for new devices. The keyboard should appear as "LM67" or a similar name.
  • Select the keyboard to pair. If prompted, enter a pairing code.
  • The keyboard can typically store multiple Bluetooth profiles (e.g., BT1, BT2, BT3). Use function key combinations (e.g., Fn+1, Fn+2, Fn+3) to switch between paired devices.

3.4 Charging the Battery

The LM67 keyboard kit includes a built-in 2000 mAh lithium battery.

  • Connect the keyboard to a USB power source (computer USB port or USB wall adapter) using the Type-C cable.
  • The charging indicator (if present) will show the charging status.
  • A full charge typically takes a few hours.
LM67 Keyboard with 2000 mAh Battery Indicator
Visual representation of the LM67 keyboard's built-in 2000 mAh large capacity lithium battery.

4. Operating Instructions

4.1 Function Keys and Shortcuts

The LM67, with its 63-key compact layout, utilizes a Function (Fn) key for accessing secondary key functions. Specific key combinations may vary slightly, but common functions include:

  • Fn + Number Row: F1-F12 keys.
  • Fn + Arrow Keys: Page Up/Down, Home/End.
  • Fn + Multimedia Keys: Play/Pause, Volume Up/Down, Mute (check keycap legends).
  • Fn + 1/2/3: Switch between Bluetooth profiles.
  • Fn + 4: Switch to 2.4G Wireless mode.
  • Fn + 5: Switch to Wired mode.

4.2 RGB Backlighting Control

The keyboard features a MULTICOLOR RGB backlight with various effects and customizable colors.

LM67 Keyboard with RGB Backlight Effect
The LM67 keyboard displaying its RGB backlight effect, which can be customized with multiple light modes and colors.
  • Fn + \|: Cycle through different RGB lighting modes.
  • Fn + Arrow Keys (Up/Down): Adjust backlight brightness.
  • Fn + Arrow Keys (Left/Right): Adjust backlight speed or direction.
  • Fn + Other Keys: Some keyboards allow changing specific colors or effects with additional Fn combinations (refer to specific keycap legends or software).

4.3 Macro Software

The LM67 supports macro software for advanced customization, allowing you to remap keys, create macros, and fine-tune RGB effects. Please visit the official ZUOYI website or product page for software downloads and detailed instructions.

5. Maintenance

5.1 Cleaning the Keyboard

  • Power Off: Disconnect the keyboard or turn off wireless modes before cleaning.
  • Remove Keycaps: Use a keycap puller to carefully remove keycaps.
  • Clean Keycaps: Wash keycaps with mild soap and water, then dry thoroughly.
  • Clean Case/PCB: Use compressed air to remove dust and debris from between switches. A soft brush or microfiber cloth can be used to wipe the case. Avoid using harsh chemicals or excessive moisture.
  • Reinstall Keycaps: Once everything is dry, reinstall the keycaps.

5.2 Battery Care

  • Avoid fully discharging the battery frequently.
  • Store the keyboard in a cool, dry place if not used for extended periods.
  • Use the provided Type-C cable or a certified equivalent for charging.

6. Troubleshooting

6.1 Keyboard Not Responding

  • Wired Mode: Ensure the Type-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
  • 2.4G Wireless Mode: Ensure the 2.4G receiver is plugged in and the keyboard is in 2.4G mode. Try re-pairing by unplugging and replugging the receiver, then switching the keyboard mode.
  • Bluetooth Mode: Ensure Bluetooth is enabled on your device and the keyboard is in the correct Bluetooth profile (BT1/BT2/BT3). Try re-pairing the device. Ensure the keyboard battery is charged.

6.2 RGB Lights Not Working/Incorrect

  • Check if the RGB backlight is turned off (Fn + \| to cycle modes).
  • Adjust brightness using Fn + Up/Down arrow keys.
  • Ensure the keyboard firmware is up to date (check ZUOYI's official website).

6.3 Keys Not Registering

  • For hot-swappable switches, carefully remove the affected switch using the switch puller.
  • Inspect the switch pins for bends or damage. Straighten bent pins or replace the switch if damaged.
  • Reinsert the switch firmly into the socket.
  • Ensure no debris is obstructing the switch socket.

7. Specifications

Feature Detail
Brand Name ZUOYI
Model LM67
Keyboard Standard 63 Keys (Compact Layout)
Operation Style Mechanical
Switches Hot Swap Yes (3/5-pin compatible)
Connection Type Bluetooth Wireless, 2.4G Wireless, USB Type-C Wired
Backlight Type MULTICOLOR RGB
Keycup Material PBT plastic
Keycup Printing Dye-sublimation
Battery Capacity 2000 mAh Lithium Battery
Application Desktop, Laptop, Tablet
Language English
Origin Mainland China

7.1 Switch Specifications (Outemu Examples)

The LM67 is compatible with various mechanical switches. Below are examples of Outemu switch specifications, which may be included with some kits or purchased separately. These diagrams illustrate the force curves and key characteristics of different switch types.

Outemu Switch Specifications and Force Curves
Detailed specifications and force curve diagrams for various Outemu switches, including Peach mute, Lime mute, Crystal, Ocean mute, Silver, Panda, Tom, and Creamy yellow switches. Each diagram shows actuation force, travel distance, and tactile/linear characteristics.

8. User Tips

  • Experiment with Switches: The hot-swap feature allows you to try different switch types (linear, tactile, clicky) to find your preferred typing feel without needing to buy a new keyboard.
  • Custom Keycaps: Enhance your keyboard's aesthetics by exploring various keycap sets. Ensure they are compatible with MX-style switches.
  • Firmware Updates: Periodically check the manufacturer's website for firmware updates to ensure optimal performance and access to new features.
  • Stabilizer Lubrication: The LM67 comes with lubricated stabilizers, but for a smoother typing experience, you can re-lubricate them with specialized keyboard lubricant if needed.

9. Warranty and Support

For warranty information, technical support, or further assistance, please contact the ZUOYI Official Store or refer to the product's purchase platform for seller contact details. Keep your proof of purchase for any warranty claims.

© 2023 ZUOYI. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.