1. Introduction
The Jonsbo D30 is a compact M-ATX desktop chassis designed for users seeking a balance between small form factor and high compatibility. It features an aluminum alloy construction, support for various motherboard sizes, and efficient cooling solutions. This manual provides detailed instructions for assembly, operation, and maintenance of your D30 case.
Video: Jonsbo D30 Product Overview. This video demonstrates the case's features, assembly process, and component compatibility.
2. Specifications
The following table outlines the key specifications of the Jonsbo D30 M-ATX Case:
| Feature | Specification |
|---|---|
| Model Number | D30 |
| Dimensions (W x D x H) | 204mm x 401mm x 325mm (including foot pad) |
| Case Weight | 4.96kg (net) / 5.88kg (gross) |
| Material | 1.5mm Aluminum Alloy, 0.6mm Steel Plate, 3mm Tempered Glass |
| Motherboard Support | M-ATX, DTX, Mini-ITX |
| Expansion Slots | 4 |
| Drive Bays | 3 x 2.5" SSD + 1 x 3.5" HDD (or 4 x 2.5" SSD) |
| Front I/O Ports | 1 x USB 3.2 Gen 1 Type-C (5Gbps), 1 x USB 3.2 Gen 1 Type-A (5Gbps), 1 x Composite Audio Interface |
| Power Supply Support | ATX PSII (length ≤ 140-200mm) |
| Max CPU Cooler Height | 168mm |
| Max GPU Length | 293-374mm (3-slot thickness) |
| Fan Support (Top) | 2 x 120mm or 2 x 140mm |
| Fan Support (Back) | 1 x 120mm |
| Fan Support (Bottom) | 3 x 120mm or 2 x 140mm |
| Water Cooling Support (Top) | 240mm AIO |
| Water Cooling Support (Back) | 120mm AIO |
| Water Cooling Support (Bottom) | 240mm AIO |
| Side Panel Window | Yes (Tempered Glass) |
| RGB Support | No RGB (Case itself) |

Image: Detailed parameter sheet for the Jonsbo D30 case.
3. Key Features
- Compact Design: The D30 offers a small footprint while maintaining high compatibility for various components.
- Motherboard Compatibility: Supports M-ATX, DTX, and Mini-ITX motherboards, providing flexibility for different build types.
- Graphics Card Support: Accommodates high-level graphics cards up to 374mm in length and 3-slot thickness.
- Efficient Cooling: Features a vertical cooling air duct design and supports various fan and water cooling configurations (up to 240mm AIO).
- Dust Protection: Equipped with full-cover bi-directional dust-proof screens on the top, bottom, back side panel, and rear fan position to keep the interior clean.
- Storage Options: Provides ample storage with support for up to three 2.5" drives and one 3.5" drive, or four 2.5" drives.
- Optimized Cable Management: Features an optimized back routing design with multiple wire holes and generous space (36mm, 22.5mm, 12mm) behind the motherboard tray.
- Interchangeable Side Panels: The D30 offers interchangeable side panels. Silver models come with double tempered glass, while black and white models feature a metal mesh back side plate for improved heat dissipation, allowing for side plate exchange.

Image: Visual summary of D30 key features including vertical cooling, GPU support, and side panel options.
4. Setup and Installation
Follow these steps to assemble your Jonsbo D30 M-ATX Case:
- Prepare the Case:
- Carefully unpack the case and remove all packaging materials.
- Remove the side panels by unscrewing the thumbscrews or releasing the latches, depending on your model.

Image: Jonsbo D30 case with the side panel removed, showing the internal structure.
- Motherboard Installation:
- Install the necessary standoffs for your M-ATX, DTX, or Mini-ITX motherboard.
- Place the motherboard into the chassis, aligning it with the standoffs and I/O shield.
- Secure the motherboard with screws.

Image: Diagram illustrating M-ATX and Mini-ITX motherboard compatibility within the D30 chassis.
- CPU Cooler Installation:
- Install your CPU cooler. The D30 supports CPU coolers up to 168mm in height.
- For optimal cooling, consider high-tier dual-tower air coolers or a 240mm AIO liquid cooler.

Image: Internal view of the D30 case showcasing a large dual-tower air cooler installed.
- Graphics Card Installation:
- Install your graphics card into the appropriate PCI-E slot. The D30 supports GPUs up to 374mm in length and 3-slot thickness.
- Important Note: The PCI-E installation slot of some M-ATX motherboards is located 2cm lower than that in the first slot. If your graphics card is thick, it may encroach on the fan space at the bottom. Select a compatible motherboard/graphics card/fan for hardware matching according to the size shown in the figure.

Image: Diagram showing GPU length support and a table indicating GPU length based on power supply position.

Image: Illustration highlighting the 2cm height difference in PCI-E slots on some M-ATX motherboards, affecting GPU clearance.
- Power Supply Installation:
- Install your ATX PSII power supply. The D30 can accommodate PSUs up to 200mm in length, with flexibility depending on GPU length (170mm-220mm).

Image: Internal view showing the supported area for a long power supply (170mm-220mm).
- Drive Installation:
- The D30 supports 3 x 2.5" hard disks and 1 x 3.5" hard disk, or 4 x 2.5" hard disks.
- The 3.5-inch hard disk and a 12cm fan near the panel at the bottom are shared (optional) mounting positions.

Image: Diagram illustrating the drive bay configuration for 2.5-inch and 3.5-inch hard drives.
- Fan and Radiator Installation:
- Install fans and/or radiators according to the thermal support specifications.
- Top: 2 x 120mm or 140mm fans, or 240mm AIO.
- Back: 1 x 120mm fan or 120mm AIO.
- Bottom: 3 x 120mm or 2 x 140mm fans, or 240mm AIO.

Image: Detailed diagram showing fan and water cooling support options for the top, back, and bottom of the case.
- Cable Management:
- Utilize the optimized back routing design with 6 wire holes and various backline spaces (36mm, 22.5mm, 12mm) to manage cables neatly.

Image: Diagram illustrating the optimized back routing design with wire holes and cable management space.
- Side Panel Reinstallation:
- Reinstall the side panels. Note that the D30 allows for side plate interchangeability. Silver models feature double tempered glass, while black and white models have a metal mesh back side plate for enhanced airflow.

Image: Comparison of non-side penetration mode (metal mesh) and standard mode (tempered glass) side panels.
5. Operating Instructions
Once all components are installed and connected, you can begin operating your Jonsbo D30 system:
- Power On/Off: Use the power button located on the front panel of the case to turn your system on or off.
- Front I/O Ports: The front panel provides convenient access to:
- 1 x USB 3.2 Gen 1 Type-C (5Gbps)
- 1 x USB 3.2 Gen 1 Type-A (5Gbps)
- 1 x Composite Audio Interface (for headphones/microphone)
- System Monitoring: Monitor your system's temperatures and performance using appropriate software to ensure optimal operation, especially with the compact design.

Image: Front view of the Jonsbo D30 case, highlighting the power button and I/O ports.
6. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your Jonsbo D30 case and its components:
- Dust Filter Cleaning: The D30 is equipped with full-cover bi-directional dust-proof screens on the top, bottom, back side panel, and rear fan position. Regularly clean these filters to prevent dust buildup and maintain efficient airflow.
- Interior Cleaning: Periodically open the case and use compressed air to remove dust from internal components, especially heatsinks and fans.
- Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.

Image: Exploded view illustrating the full-cover bi-directional dust-proof design with removable dust filters.
7. Troubleshooting
This section addresses common issues you might encounter with your Jonsbo D30 case. Note that most issues related to PC operation are component-specific rather than case-specific.
- System Not Powering On:
- Ensure all power cables are securely connected to the power supply, motherboard, and components.
- Verify that the front panel power switch cable is correctly connected to the motherboard's front panel header.
- Check the power supply unit (PSU) switch is in the 'ON' position.
- Overheating Issues:
- Ensure all case fans are properly installed and spinning.
- Clean dust filters and internal components regularly to maintain optimal airflow.
- Verify that CPU and GPU coolers are correctly mounted and making good contact with the components.
- Consider optimizing fan direction for better airflow (e.g., bottom intake, top/rear exhaust).

Image: Illustration of the vertical short duct construction for efficient heat dissipation within the D30 case.
- Front I/O Ports Not Working:
- Check that the USB and audio cables from the front panel are correctly connected to the corresponding headers on your motherboard.
For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU, etc.) or seek assistance from a qualified technician.
8. User Tips
Based on general user experiences with compact PC cases:
- Plan Your Build: Due to the compact nature of the D30, it is highly recommended to plan your component selection carefully, paying close attention to maximum dimensions for CPU coolers, GPUs, and PSUs to ensure compatibility and ease of installation.
- Cable Management is Key: Take advantage of the optimized cable routing features to keep the interior tidy. Good cable management not only improves aesthetics but also enhances airflow, which is crucial in smaller cases.
- Consider Airflow: Experiment with fan configurations (intake/exhaust) to find the best balance for your specific components and usage, especially if you are using high-performance hardware.
- Side Panel Choice: If thermal performance is a priority, consider using the metal mesh side panel (available on black and white models) for improved airflow compared to the tempered glass panel.
9. Warranty and Support
For warranty information, technical support, or service inquiries regarding your Jonsbo D30 M-ATX Case, please refer to the warranty card included with your product or visit the official Jonsbo website. Keep your proof of purchase for warranty claims.