1. Introduction
Thank you for choosing the WORKPRO 12V Cordless Rotary Tool Kit. This multi-use tool is designed for a wide range of applications including carving, sanding, polishing, drilling, grinding, and cutting, making it ideal for handmade projects and DIY tasks. Its cordless design offers flexibility and convenience, powered by a rechargeable 2.0Ah Lithium-ion battery.
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your rotary tool. Please read it thoroughly before first use and keep it for future reference.
2. Safety Information
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using power tools.
- Read all instructions: Familiarize yourself with the tool's functions and operating procedures.
- Wear appropriate safety gear: Always wear safety glasses, gloves, and a dust mask when operating the tool.
- Keep work area clean: Cluttered areas invite accidents.
- Avoid accidental starting: Ensure the switch is in the OFF position before inserting the battery pack or picking up the tool.
- Do not overreach: Keep proper footing and balance at all times.
- Secure workpiece: Use clamps or other practical ways to secure the workpiece to a stable platform.
- Pressure Protection: If you apply too much pressure, the tool's protection mechanism will trigger. Wait for the indicator to blink 20 times, then turn the switch ON again.
- Battery Safety: The tool will not work if the switch is ON when you plug in the battery. Wait for the indicator to blink 15 times and turn the switch ON again.
- Low Battery: After use, if the battery is low, ensure it is fully charged when not in use to maintain battery health.
3. Package Contents
Your WORKPRO 12V Cordless Rotary Tool Kit includes the following items:
- 12V Cordless Rotary Tool
- 2.0Ah Lithium-ion Battery
- Battery Charger
- 114 Easy Change Accessories (as detailed below)
- Storage Bag
Included Accessories (114-piece kit):
- Sanding: 3pcs Sanding Shank, 40pcs Sanding Disc, 8pcs Sanding Bands
- Grinding/Sharpening: 11pc Oxide Grinding Stone
- Polishing/Cleaning: 4pcs Felt Polishing Wheel, 1pc Stainless Steel Brush, 1pc Whet Stone
- Drilling: 2pcs Drill Bits
- Engraving: 2pcs Engraving Cutters
- Milling: 1pc HSS Cutters
- Cutting: 36pcs Cut-off Wheels
- Other: 1pc Wrench, 2pcs Collets (2.3mm/3.2mm), 1pc Mandrels for Cut Off Wheel
4. Product Overview
Familiarize yourself with the components of your WORKPRO 12V Cordless Rotary Tool.
- Speed Indicator: Displays the current speed setting.
- Battery Indicator: Shows the remaining battery charge.
- Switch: Power ON/OFF and speed adjustment.
- Spindle Locking Button: Used to lock the spindle for accessory changes.
- Heat Dissipation Holes: Ensures proper cooling during operation.
- Hanging Ring: For convenient storage or hanging during use.
- Chuck: Holds various accessories (Range: 2.3mm/3.2mm).
- Replaceable Lithium-ion Battery: Provides cordless power.
5. Charging the Battery
The WORKPRO rotary tool is powered by a 2.0Ah Lithium-ion battery. Ensure the battery is fully charged before first use and whenever the battery indicator shows low charge.
- Connect the charger to a suitable power outlet (200-240V, 50/60Hz).
- Insert the battery pack into the charger.
- The charging indicator on the battery will show its status:
- Red light: In the Charging
- Green light: Fully Charged
- Charging time is approximately 60-90 minutes for a full charge.
- Once fully charged, remove the battery from the charger.
6. Setup: Changing Accessories
Follow these steps to safely install or change accessories on your rotary tool:
- Press down the spindle locking button and unscrew the black nut at the chuck.
- Choose the appropriate chuck (2.3mm or 3.2mm) for your accessory and place it into the tool if not already installed.
- Insert the desired accessory into the chuck.
- Screw on the black nut until it locks the accessory securely.
- Use the small wrench provided to tighten the nut firmly.
- Release the spindle locking button. The tool is now ready for use.
7. Operation
Power On/Off and Speed Adjustment
The rotary tool features 5 variable speed settings to match the requirements of different tasks and materials.
- To turn the tool ON, slide the switch to the ON position.
- To turn the tool OFF, slide the switch to the OFF position.
- Adjust the speed using the speed switch. The speed indicator will show the current RPM. The available speeds are:
- 7500 RPM
- 15000 RPM
- 20000 RPM
- 25000 RPM
- 32000 RPM (Max Speed)
Applications
The WORKPRO rotary tool is suitable for a variety of tasks:
- Cutting: Use appropriate cut-off wheels for light cutting tasks on various materials.
- Polishing: Attach polishing wheels and compounds to achieve a smooth, shiny finish.
- Engraving: Utilize engraving cutters for detailed work on wood, metal, or plastic.
- Drilling: Use drill bits for small holes in soft materials.
- Sanding: Employ sanding bands and discs for shaping, smoothing, and removing material.
- Cleaning: Use brushes for cleaning and deburring.
Important: Always select the correct accessory and speed for the material and task at hand. Start with a lower speed and gradually increase if needed.
8. Maintenance
Cleaning
- Always disconnect the battery before cleaning.
- Use a soft, damp cloth to wipe down the tool's exterior. Do not use harsh chemicals or abrasive cleaners.
- Clear any debris from the heat dissipation holes to ensure proper airflow.
- Clean accessories after each use to maintain their effectiveness and lifespan.
Storage
- Store the tool and accessories in a dry, clean place, away from direct sunlight and extreme temperatures.
- The provided solid storage box is designed to keep all accessories neatly fixed and organized, making it easy to carry and resistant to falling.
- Ensure the battery is partially charged (not fully depleted or fully charged for long-term storage) if storing for extended periods.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not turn on. | Battery not charged or improperly inserted. | Ensure battery is fully charged and correctly inserted. If the switch was ON when inserting the battery, turn it OFF, wait for the indicator to blink 15 times, then turn ON again. |
| Tool stops during operation. | Overload protection triggered (too much pressure). | Reduce pressure on the workpiece. Wait for the indicator to blink 20 times, then turn the switch ON again. |
| Accessory wobbles or falls out. | Chuck not tightened properly or incorrect chuck size. | Ensure the correct chuck size (2.3mm or 3.2mm) is used and the nut is securely tightened with the wrench. |
| Reduced performance or short battery life. | Battery needs charging or is aging. | Fully charge the battery. If the problem persists, consider replacing the battery. |
10. Specifications
| Feature | Specification |
|---|---|
| Type | 12V Lithium-ion Wireless Rotary Tool |
| Voltage | 12V |
| No-load Speed | 7500-15000-20000-25000-32000 RPM (5 Variable Speeds) |
| Charge Time | 60-90 min |
| No-load Discharge Time | >25 min |
| Chuck Size | 2.3mm / 3.2mm |
| Battery | 2.0Ah Lithium-ion (Batteries Required: Yes) |
| Charger Voltage | 200-240V |
| Frequency | 50/60Hz |
| Weight | 0.63 KG (630g) |
| Size (L x W x H) | 237 x 48 x 59 mm (approx. 9.3 inches in length) |
| Certification | CE |
| Use | Home DIY |
11. User Tips
- Accessory Compatibility: This tool is compatible with standard rotary tool accessories, including those from brands like Dremel, provided they fit the 2.3mm or 3.2mm chuck sizes.
- Battery Management: For optimal battery life, avoid completely draining the battery frequently. Recharge it when the indicator shows low charge.
- Versatility: Don't hesitate to experiment with different accessories and speeds on scrap materials to understand the tool's capabilities for various tasks like carving, sanding, and polishing.
12. Warranty and Support
WORKPRO products are manufactured to high-quality standards. For any questions regarding your product, technical support, or warranty claims, please contact your retailer or the WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.
13. Product Video
Watch this video to see the WORKPRO range of tools in action, demonstrating their versatility across various home, garden, and garage projects.
