XIAOMI Walkie-Talkie 2S

Contents

Xiaomi Walkie-Talkie 2S User Manual

Model: XMDJJ04FY

1. Safety Information

Please read this manual carefully before using the product and keep it for future reference. Product features may vary due to technical upgrades and firmware updates. For the latest features and safety guidelines, please download the Xiaomi Walkie-Talkie APP and refer to the electronic manual within the app.

1.1. Warnings

The transmission of this walkie-talkie may affect electronic or medical devices. Do not use the walkie-talkie in the following scenarios:

  • Near hospitals, individuals with pacemakers, or other medical devices.
  • In explosive environments such as gas stations (flammable gases, dust, metal powder, granular powder, etc.).
  • On airplanes or near other electronic devices that may be interfered with.
  • Any other locations where wireless devices are restricted or warnings are posted.

1.2. Prohibited Operations

To prevent equipment failure or personal injury, do not perform the following operations:

  • Do not apply voltage other than the specified voltage to the walkie-talkie's power input.
  • Do not disassemble or modify the walkie-talkie.
  • Do not immerse the walkie-talkie in water.
  • Do not hit or throw the walkie-talkie.

1.3. Battery Safety

  • Only use manufacturer-approved batteries. Replacing the battery with an incorrect type may void safety protection and pose a risk of explosion, fire, or other hazards.
  • Do not place the battery in high-temperature environments such as direct sunlight, fire, microwave ovens, or ovens, as this may cause explosion or leakage of flammable liquids or gases.
  • Do not disassemble, hit, squeeze, or cut the battery, as this may cause explosion.
  • Do not place the battery in low-pressure environments, as this may cause battery explosion or leakage of flammable liquids or gases.
  • If the battery swells significantly, discontinue use.
  • Do not swallow the battery, as it may cause chemical burns.
  • If you believe the battery may have been swallowed or placed inside any part of the body, seek immediate medical attention.
  • If the battery compartment is not securely closed, stop using the product and keep it away from children.
  • Do not dispose of batteries with household waste. Please follow national regulations for safe disposal of used batteries.

1.4. Abnormal Operation

If the walkie-talkie exhibits any of the following abnormalities, immediately stop charging or using it, turn off the power, and contact the after-sales service department:

  • If the main unit or charger smokes or emits an odor during charging, immediately turn off the walkie-talkie and unplug the power adapter to prevent overheating, burning, fire, or explosion.

2. Product Overview

2.1. Components and Controls

The Xiaomi Walkie-Talkie 2S features a clear 1.77-inch color display and intuitive controls.

Diagram of Xiaomi Walkie-Talkie 2S front view with labels for antenna, call button, volume up/down, left/right/middle buttons, display, microphone, speaker, and power button.

Front View:

  • Antenna: For signal transmission and reception.
  • Display Screen: 1.77-inch color screen for channel information, settings, and status.
  • Call Button: Press and hold to transmit voice.
  • Volume Up/Down Buttons: Adjust speaker volume.
  • Left/Right/Middle Buttons: Navigation and selection within menus.
  • Up/Down Buttons: Navigate through menus and channels.
  • Microphone Pickup Hole: For voice input.
  • Speaker: For audio output.
Diagram of Xiaomi Walkie-Talkie 2S side view with labels for Type-C charging port, 3.5mm headphone jack, lanyard hole, and back clip.

Side/Top View:

  • Type-C Charging Port: For charging the device.
  • 3.5mm Headphone Jack: For connecting wired headphones.
  • Lanyard Hole: For attaching a lanyard.
  • Back Clip: For attaching the walkie-talkie to clothing or gear.
  • Power Button (Top): Long press to power on/off, short press for menu/lock functions.

Note:

  • The antenna is not detachable. Do not pull it forcefully to prevent damage.
  • The back clip is fixed to the body and cannot be removed.

2.2. Package Contents

Image showing the contents of the Xiaomi Walkie-Talkie 2S package: one walkie-talkie, one Type-C charging cable, and one user manual.

The package includes:

  • Xiaomi Walkie-Talkie 2S × 1
  • Type-C Charging Cable × 1
  • User Manual (including warranty certificate) × 1

3. Setup

3.1. Power On/Off

  • Power On: Long press the power button for 3 seconds. The display screen will show the power-on interface, and the walkie-talkie will turn on.
  • Power Off/Restart: In standby mode, long press the power button. A pop-up menu will appear, allowing you to select 'Power Off' or 'Restart'.

3.2. Channel Settings

After powering on, you can switch the current channel on the main interface using the up/down buttons. You can also short press the right button to enter the channel interface and select the desired channel according to the on-screen prompts.

Note:

  • The preset long-distance channels correspond one-to-one with Xiaomi brand walkie-talkies. You can communicate directly when on the same channel.
  • For long-distance channels and custom channels, you must obtain an amateur radio operator certificate and complete relevant procedures with the appropriate radio management authority in accordance with the "Radio Management Regulations of the People's Republic of China" to use them legally.

3.3. APP Connection (Mi Home App)

The Xiaomi Walkie-Talkie 2S can be controlled via the Mi Home APP.

  1. Scan the QR code below to download and install the Mi Home APP. If you already have the Mi Home APP installed, you will be directed to the device connection page. Alternatively, search for "Mi Home" in your app store to download and install.
  2. Open the Mi Home APP, click "+" in the upper right corner of the page, and follow the APP prompts to add the device.
QR code for Mi Home APP download

Mi Home APP Download QR Code

Note:

  • Due to updates to the Mi Home APP, actual operations may differ slightly from the descriptions above. Please follow the instructions within the current Mi Home APP.
  • For location sharing and other advanced features, please download and install the Xiaomi Walkie-Talkie APP.

4. Operating Instructions

4.1. Basic Communication

After powering on, set both walkie-talkies to the same channel to communicate.

Diagram showing two walkie-talkies on the same channel for communication.

Hold the walkie-talkie approximately 3-5cm from your face. Press and hold the call button while speaking to transmit your voice in real-time.

Diagram illustrating how to hold the walkie-talkie and speak into the microphone.

4.2. Connecting Headphones

4.2.1. Wired Headphones

The walkie-talkie is compatible with most mainstream 3.5mm wired headphones. However, you still need to press and hold the call button on the walkie-talkie to transmit voice.

Note: When speaking, aim the microphone of the headset towards your mouth.

4.2.2. Bluetooth Headphones

To connect Bluetooth headphones:

  1. On the walkie-talkie, navigate to Menu > Bluetooth Device Connection > Bluetooth (Enable) > Device Connection.
  2. Follow the prompts to connect your Bluetooth headphones.

Note:

  • After connecting Bluetooth headphones, you still need to press the call button on the walkie-talkie to transmit.
  • When speaking, aim the microphone of the headset towards your mouth.
  • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Any use of such marks by [Xiaomi Inc.] is under license. Other trademarks and trade names are those of their respective owners.

4.3. Batch Configuration

Use one Xiaomi Walkie-Talkie 2S to initiate configuration, and the other Xiaomi Walkie-Talkie 2S units to receive configuration. This allows for quick synchronization of all channel information across multiple devices.

Diagram showing the batch configuration process with an initiating walkie-talkie and receiving walkie-talkies.

Initiate Configuration:

  • Press and hold the Volume Up button.
  • Then press and hold the Call button for 3 seconds until the initiation configuration interface appears.

Receive Configuration:

  • Press and hold the Volume Down button.
  • Then press and hold the Call button for 3 seconds until the receiving configuration interface appears.

Note: Do not initiate configuration with multiple walkie-talkies simultaneously during a batch configuration process to avoid confusion.

4.4. Additional Features

The Xiaomi Walkie-Talkie 2S offers multiple auxiliary functions:

FunctionDescription
FM RadioSearch and listen to FM radio broadcasts (87-108MHz).
Hands-free TalkOnce enabled, you can talk without pressing the call button.
Channel ScanningScans for occupied channels within a certain frequency range.
Dual Frequency ModeThe walkie-talkie can quickly switch between two different frequency points. When a signal is detected on one channel, the walkie-talkie will play that signal until it ends.

Note: For detailed feature descriptions, please refer to the "Frequently Asked Questions" section in the Xiaomi Walkie-Talkie APP.

5. Charging

The walkie-talkie uses a Type-C charging cable. When charging, the battery icon in the status bar will change to indicate charging status (the charging status will also be displayed when charging while powered off).

Image showing the walkie-talkie's Type-C charging port and various charging methods: direct charging, car charging, and mobile power charging.

Important:

  • Please use a 5V power adapter certified by CCC.
  • It is recommended to use a power adapter with an output current of 2A or higher. Otherwise, the charging time may be longer.
  • The power adapter needs to be purchased separately.

6. Maintenance

6.1. General Care

  • Keep the device clean and dry. Avoid exposure to dust, dirt, and moisture.
  • Clean the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Protect the device from extreme temperatures.
  • Avoid dropping or subjecting the device to strong impacts.

6.2. Battery Care

  • Follow the battery safety guidelines mentioned in Section 1.3.
  • Do not leave the device uncharged for extended periods.
  • If the device will not be used for a long time, charge it to about 50% before storing.

7. Troubleshooting

If your Xiaomi Walkie-Talkie 2S experiences any of the following issues, please refer to the table below for potential causes and solutions. If the problem persists, contact customer support.

Issue DescriptionPossible Cause / Solution
Casing broken or damagedStructural or material defect. Contact service.
Cannot charge or power on after chargingProduct cannot be charged or fails to power on normally after charging. Contact service.
Function buttons not workingOne or more function buttons are unresponsive. Contact service.
Speaker no sound, display not workingSpeaker is silent or display screen is blank/malfunctioning. Contact service.
Cannot communicate on the same channel within effective rangeCommunication failure within the specified effective range on the same channel. Contact service.

8. Specifications

ParameterValue
Product ModelXMDJJ04FY
Product Dimensions55 × 22.7 × 170mm (including 50mm antenna length, 7.7mm back clip thickness)
Net Weight139.5g
Product ColorDeep Space Ash
Battery TypeLithium-ion polymer battery
Battery Capacity2190mAh (8.3Wh)
Nominal Battery Voltage3.8V
Wireless ConnectionDual-mode Bluetooth 5.0
Frequency BandAmateur U-band
Frequency Range430.000MHz - 440.000MHz
Modulation Method16K0F3E/8K50F3E
Headphone Jack3.5mm socket
Transmit Power4W
Receiving Sensitivity-122dBm (12dB SINAD)
Operating Temperature-20℃ ~ 45℃
Charging Temperature0℃ ~ 45℃
Interface TypeType-C
Rated Input5V=2A
Screen Size1.77 inches
Screen Resolution128 × 160
Protection RatingIP54
Executive StandardQ/XAFY0001-2020

8.1. Sub-audio Codes

There are a total of 258 groups, including 50 analog sub-audio codes and 104x2 (N-phase and 1-phase) digital sub-audio codes. (Detailed list available in Mi Home APP and Xiaomi Walkie-Talkie APP).

8.2. Preset Channel List

The walkie-talkie comes with 20 preset long-distance channels. The factory frequencies for each channel are shown in the table below:

Channel No.Frequency (MHz)Channel No.Frequency (MHz)
H01430.1375H11435.1375
H02430.4375H12435.4375
H03431.1375H13436.1375
H04431.4375H14436.4375
H05432.1375H15437.1375
H06432.4375H16437.4375
H07433.1375H17438.1375
H08433.4375H18438.4375
H09434.1375H19439.1375
H10434.4375H20439.4375

9. User Tips

  • App Location Setting: When connecting to the Mi Home App, ensure the app's location is set to 'China Mainland' for proper functionality.
  • Language Setting: The walkie-talkie supports Chinese and English. Refer to the provided video for step-by-step instructions on how to change the language to English.
  • Headset Compatibility: The Xiaomi Walkie-Talkie 2S is compatible with various Bluetooth™ earphone models, including Xiaomi Bluetooth™ earphone Air2 SE, Redmi Buds 3, Xiaomi Buds 3 Pro, Xiaomi Buds 4 Pro, Redmi Buds 4, Redmi AirDots 3, Xiaomi Buds 3 True Wireless Noise Reduction earphone 3, Xiaomi Bluetooth™ Collar earphone Youth Edition, and Xiaomi Noise Reduction Collar Bluetooth™ earphone.
  • Range: Users report very good communication distance.

10. Warranty and Support

The after-sales service for Xiaomi Walkie-Talkie 2S products strictly adheres to the "Consumer Rights Protection Law of the People's Republic of China" and the "Product Quality Law of the People's Republic of China," implementing a three-guarantee service. The service content is as follows:

10.1. Warranty Policy

  1. Within 7 days of receipt: If the product exhibits performance faults listed in the "Product Performance Fault Table," confirmed by a Xiaomi after-sales service center, you can enjoy free return or replacement services.
  2. Within 8 to 15 days of receipt: If the product exhibits performance faults listed in the "Product Performance Fault Table," confirmed by a Xiaomi after-sales service center, you can enjoy free replacement or repair services.
  3. Within 12 months of receipt: If the product exhibits performance faults listed in the "Product Performance Fault Table," confirmed by a Xiaomi after-sales service center, you can enjoy free repair services.

10.2. Non-Warranty Policy

The following situations (but not limited to) are not covered by warranty and require paid repair:

  • Disassembly, repair, modification, misuse, abuse, liquid ingress, accidents, or use of non-original accessories by personnel not authorized by Xiaomi.
  • Exceeded the three-guarantee period.
  • Damage caused by force majeure.
  • Product performance faults not listed in the "Product Performance Fault Table."
  • Product performance faults caused by human factors or accessories.
  • Any damage caused by not using, maintaining, or adjusting the Xiaomi Walkie-Talkie 2S according to the requirements of this user manual.
  • Malicious damage to the warranty card content or device information, including blurring, tearing, or tampering.
  • Other faults and damages not caused by the product's design, manufacturing, or quality issues.

10.3. Manufacturer Information

Manufacturer: Xi'an Fengyu Information Technology Co., Ltd. (Xiaomi Ecological Chain Enterprise)

Address: Room 506, Block A, Science and Technology Resources Integration Center, Zhangba Street, High-tech Zone, Xi'an City, Shaanxi Province, China

10.4. Customer Service

For after-sales service requests, please call Xiaomi customer service at: 400-100-5678

Or visit the Xiaomi after-sales service website: www.mi.com/service

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.