COOSPO H808S

Contents

COOSPO H808S Heart Rate Monitor User Manual

Model: H808S

1. Introduction

The COOSPO H808S Heart Rate Monitor is designed to track your heart rate accurately during various physical activities. It transmits real-time heart rate data via Bluetooth or ANT+ to compatible devices and sports applications, helping you to scientifically manage your exercise intensity. This product is intended for sports purposes only and is not meant to replace any medical device.

Video: COOSPO H808S Heart Rate Monitor in action during cycling, yoga, rope skipping, basketball, and running, displaying real-time heart rate.

2. Standard Accessories

  • Heart Rate Monitor (CR2032 battery installed) x 1
  • Chest Strap x 1
  • User Manual x 1
COOSPO H808S Heart Rate Monitor and Chest Strap

Image: The COOSPO H808S Heart Rate Monitor module and the adjustable chest strap.

3. Setup

Wearing the Heart Rate Monitor

  1. Moisten the Electrode Areas: Lightly moisten the electrode areas on the back of the chest strap with water or electrode gel. This ensures good contact with your skin for accurate heart rate detection.
  2. Diagram showing how to moisten the electrode areas on the chest strap.

    Image: Diagram illustrating the moistening of electrode areas on the chest strap.

  3. Attach the Monitor: Attach the heart rate monitor module to the chest strap. Ensure the 'L' marking on the monitor is towards your left side.
  4. Diagram showing how to attach the heart rate monitor to the chest strap.

    Image: Diagram illustrating the attachment of the heart rate monitor module to the chest strap.

  5. Adjust the Chest Strap: Adjust the length of the chest strap so it fits tightly but comfortably around your chest. The moist electrode areas should be firmly against your skin, and the front of the monitor should be in a central and upright position.
  6. Diagram showing the heart rate monitor correctly positioned on the chest.

    Image: Diagram showing the heart rate monitor correctly positioned on the chest.

  7. Confirmation: When two short "beep" sounds are heard, and the LED flashes green, it indicates that the heart rate sensor is correctly worn and a heart rate signal has been detected.

4. Operation

Connecting to a Smartphone App

  1. Enable Bluetooth: On your smartphone, go to Settings and toggle Bluetooth to the ON position.
  2. Open Fitness App: Start your preferred sports and health application (e.g., CoospoRide, Wahoo Fitness, Zwift, Peloton, Strava, Nike+ Run Club, Polar Beat, Apple Health). Do NOT attempt to pair the device directly from your phone's Bluetooth settings; connect within the app.
  3. Connect Device: Within the app, navigate to the device connection or sensor pairing section and select the H808S from the list of available devices.
  4. Connection Indicator: When the device is successfully paired with the app via Bluetooth, the blue LED light on the monitor will flash.
  5. Disconnection Indicator: When the heart rate monitor is removed, a "beep" will be heard, indicating that the product has stopped working. The LED will flash green when disconnected.

Connecting with an ANT+ Watch or Bike Computer

  1. Wear the Monitor: Ensure the heart rate monitor is correctly worn as described in the Setup section.
  2. Search for Device: On your ANT+ compatible watch or bike computer, go to the sensor settings and search for new ANT+ devices.
  3. Add H808S: Select and add the H808S from the detected ANT+ device list.
  4. Start Training: Follow the prompts on your watch or bike computer to start your training and view your real-time heart rate data on the display.
Diagram showing BLE & ANT+ Connectivity with smartwatches, GPS bike computers, and fitness equipment.

Image: Diagram illustrating the BLE & ANT+ connectivity of the H808S with various smart sports watches, GPS bike computers, and fitness equipment.

Diagram showing third-party app compatibility with a smartphone displaying heart rate data.

Image: Diagram showing the H808S's compatibility with third-party apps, with a smartphone displaying heart rate data.

Diagram explaining LED light and beep reminders for connection status.

Image: Diagram explaining the LED light and beep reminders: two short beeps for starting work, one long beep for stopping work. LED flashes blue for connected, green for disconnected.

5. Maintenance

Heart Rate Monitor Module

  • Detach the connector from the strap after each use.
  • Dry the connector with a soft towel.
  • Do not use cleaning chemicals on the monitor module.

Chest Strap

  • Rinse the strap under running water after each use and hang it to dry.
  • Do not clean the strap in a washing machine or dryer.
  • Never use cleaning chemicals, as they may cause rapid aging of the strap and shorten its service life.
  • Do not stretch the strap or bend the electrode areas sharply.
  • Do not store the heart rate monitor in a wet or gas-tight environment to prevent oxidation. Store it in a cool, dry environment.

Battery Replacement

If the device cannot be detected or is not functioning correctly, consider replacing the battery.

  1. Open Battery Door: Use a coin to clip the groove on the battery door, rotate it in the OPEN direction, and open the battery door.
  2. Diagram showing how to open the battery compartment with a coin.

    Image: Diagram illustrating the use of a coin to open the battery compartment by rotating it in the 'OPEN' direction.

  3. Remove Old Battery: Remove the old battery. Properly dispose of used batteries in accordance with local environmental regulations.
  4. Insert New Battery: Place the new CR2032 battery into the battery bin with the positive (+) side facing up.
  5. Diagram showing how to insert a new battery into the heart rate monitor.

    Image: Diagram illustrating the insertion of a new CR2032 battery into the heart rate monitor, ensuring correct polarity.

  6. Close Battery Door: Rotate the battery door in the reverse direction of OPEN with a coin until it is securely covered.

6. Troubleshooting

  • Device Not Detected: If your device is not detected by your phone or ANT+ watch, ensure the monitor is correctly worn and the electrode areas are moistened. If the issue persists, try replacing the battery.
  • No Heart Rate Reading: Check that the monitor is firmly against your skin and the electrodes are moist. Ensure the device is paired correctly with your app or watch.
  • Inaccurate Readings: Ensure good skin contact. Avoid wearing loose clothing that might interfere with the sensor.
  • Connection Issues: Make sure Bluetooth is enabled on your phone and you are connecting through the fitness app, not directly through phone settings. For ANT+ devices, ensure they are within range and not connected to other sensors simultaneously.

7. Specifications

FeatureSpecification
Weight15g (Monitor only)
Heart Rate Range30 - 240 bpm
Wireless TransmissionBluetooth 4.0 & ANT+
Transmission DistanceBluetooth: 10m, ANT+: 6m
Battery Life300 Hours
Waterproof RatingIP67 (Splashproof)
Size (Monitor only)59 x 35 x 13.5 mm
Strap Adjustable Length(L) 65 - 95 cm
CertificationsCE, FCC, RoHS, PSE
Diagram showing product dimensions and specifications.

Image: Detailed product parameter diagram including dimensions, weight, heart rate range, wireless transmission, battery life, waterproof rating, and strap adjustability.

Image demonstrating IP67 waterproof rating with water splashing on the monitor.

Image: The H808S Heart Rate Monitor demonstrating its IP67 waterproof capability with water splashing around it.

8. Compatible Devices & Apps

Applicable Smart Phones

  • iOS: iOS 7.0 or above, iPhone 4s model or above
  • Android: Android 4.3 or above with Bluetooth 4.0

Compatible Apps

The H808S supports more than 200 third-party applications, including:

  • CoospoRide
  • Wahoo Fitness
  • Zwift
  • Peloton
  • Strava
  • Nike+ Run Club (Note: Refer to app settings for heart rate display)
  • Openrider
  • Runkeeper
  • Endomondo
  • Sports Tracker
  • Polar Beat
  • Apple Health
  • Heartool
  • DDP Yoga

Compatible Devices

The H808S is compatible with smart fitness equipment, GPS watches, and bike computers that support Bluetooth and ANT+ technology, including but not limited to:

  • Garmin devices (e.g., Fenix series, Edge series, Forerunner series)
  • Wahoo devices
  • Bryton devices (e.g., Bryton S510)
  • COOSPO GPS devices (e.g., CS500)
  • Smart Sports Watches
  • GPS Bike Computers
  • Fitness Equipment

9. User Tips

  • Ensure Proper Connection: Always moisten the electrode areas and ensure the strap is snug for immediate and accurate heart rate detection.
  • Single Device Connection: The monitor is designed to connect with one device at a time via Bluetooth or ANT+. If you experience connection issues, ensure it's not already paired with another device.
  • Check Battery if Disconnected: If the monitor frequently disconnects or is not detected, check the battery status and replace it if necessary.
  • Accuracy: Users report high accuracy comparable to more expensive brands, especially when worn correctly.
  • Garmin Compatibility: Many users confirm seamless and quick connection with various Garmin watches and bike computers.
  • Bryton Compatibility: The device has been successfully connected with Bryton devices like the S510, providing reliable pulse measurements.

10. Safety Information

General Safety Precautions

  • Do not open or modify the product.
  • Do not disassemble or attempt to service this product.
  • This product is safe under normal and reasonably foreseeable operating conditions.
  • If the product is operating improperly, contact COOSPO support.
  • The product must be returned to the manufacturer for any service or repair.

Battery Statement & Warnings

WARNING: INGESTION HAZARD

  • This product contains a button cell or coin battery.
  • Death or serious injury can occur if ingested.
  • A swallowed button cell or coin battery can cause internal chemical burns in as little as 2 hours.
  • KEEP new and used batteries OUT OF REACH of CHILDREN.
  • Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
  • Remove and immediately recycle or dispose of used batteries according to local regulations. Do NOT dispose of batteries in household trash or incinerate.
  • Even used batteries may cause severe injury or death. Call a local poison control center for treatment information.
  • Compatible battery type: CR2032. Nominal battery voltage: 3V.
  • Do not force discharge, recharge, disassemble, heat above 45°C, or incinerate. Doing so may result in injury due to venting, leakage, or explosion resulting in chemical burns.
  • Ensure the batteries are installed correctly according to polarity (+ and -).
  • Do not mix old and new batteries, different brands, or types of batteries (e.g., alkaline, carbon-zinc, or rechargeable batteries).
  • Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
  • Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.

11. Warranty and Support

COOSPO products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please contact COOSPO customer support through their official channels. Please retain your proof of purchase for warranty claims.

For further assistance, you may refer to the official user manual PDF: View User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.