Aigo AR12

Contents

Aigo AR12 120mm RGB PC Fan Instruction Manual

Model: AR12

Brand: Aigo

1. Introduction

Thank you for choosing the Aigo AR12 120mm RGB PC Fan. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new computer case cooling fan. The AR12 series fans are designed to provide efficient cooling and vibrant ARGB lighting effects for your PC gaming setup.

Video: Aigo AR12 RGB PC Fan demonstration showing various lighting effects and installation in a PC case.

2. Product Overview

2.1 Components

The Aigo AR12 fan kit typically includes the following components:

  • AR12 Fans (quantity varies by kit, e.g., 1, 3, 5, 6, 7, 8, 9, 10)
  • Control Box
  • Remote Control
  • Mounting Screws
  • Power Cable (SATA)
  • LED Strip (optional, depending on kit)
Aigo AR12 fan kit components including fans, controller, and remote

Image: Typical Aigo AR12 fan kit showing fans, control box, and remote control.

2.2 Features

  • Vibrant ARGB Lighting: Customizable lighting effects with 5V 3-pin ARGB synchronization.
  • Efficient Cooling: Designed for optimal airflow to keep your PC components cool.
  • Quiet Operation: Hydro Bearing design for reduced noise levels.
  • Anti-Shock Pads: Integrated anti-shock pads on both sides to reduce resonance and noise.
  • Multiple Control Options: Control lighting via included remote or synchronize with compatible motherboards.
Close-up of Aigo AR12 fan showing anti-shock pad design

Image: Detail of the anti-shock pad design on the Aigo AR12 fan.

3. Specifications

Attribute Value
Model AR12
Fan Dimensions 120 x 120 x 25 mm
Weight 158g
Fan Speed 1200 (±10%) RPM / 1200 - 1350 RPM
Noise Level 24 dBA (MAX) / 25 dBA
Air Volume 48 CFM
Bearing Type Hydro Bearing / Fluid Bearing
Rated Current 0.16A
Voltage 12V
Rated Power 4.2W / 3W
Life Span 20,000 Hrs / 100,000 Hrs
Power Interface SATA, 6-pin, 5V-3pin ARGB
Blade Quantity 7
Certification CE, FCC, RoHS
Aigo AR12 fan dimensions diagram

Image: Aigo AR12 fan dimensions (120mm x 120mm x 25mm).

4. Installation Guide

4.1 Fan Mounting

Mount the AR12 fans into your PC case using the provided screws. Ensure the fans are oriented correctly for optimal airflow.

Diagram showing fan wind direction

Image: Wind direction display. The wind direction sucks in from the front, while the back (the side with the bracket and the wire) comes out.

4.2 Control Box Wiring

Connect the fans and other ARGB components to the control box as follows:

  1. Power Connection: Connect the SATA power cable from your power supply to the SATA port on the control box.
  2. Fan Connections: Connect the 6-pin fan cables from your AR12 fans to the FAN1-10 ports on the control box. Connect them in sequence from FAN1 to FAN10.
  3. LED Strip Connection: If using LED strips, connect them to the LED1-2 ports on the control box.
  4. Reset Button Connection (Optional): To control the lighting via your computer case's reset button, connect the Reset cable from your case to the Reset port on the control box.
  5. Motherboard Sync Connection (Optional): To synchronize ARGB lighting with your motherboard, connect the 5V-3pin ARGB cable from the control box to the 5V-3pin ARGB header on your motherboard.
Wiring diagram for Aigo AR12 control box

Image: Control box wiring diagram showing connections for fans, power, LED strips, and motherboard sync.

4.3 Motherboard ARGB Sync Connection

Ensure you connect the 5V-3pin ARGB cable to the correct header on your motherboard. Do NOT connect it to a 12V RGB header, as this can damage the LEDs.

Correct 5V 3PIN ARGB motherboard connection

Image: Correct connection to a 5V 3PIN ARGB header (labeled 5V D G). Avoid 12V RGB headers.

5. Operating Instructions

5.1 Remote Control Usage

The included remote control allows you to manage fan speed and lighting effects. Ensure the control box is not set to motherboard sync mode (RC/MB switch) for remote control functionality.

Aigo AR12 remote control layout and functions

Image: Remote control layout with button descriptions.

  • **On/Off:** The 'On' key is responsible for switching lights and independent fan control. The 'Off' key is responsible for switching lights and independent fan control.
  • **RC/MB Switch:** Toggles between remote control and motherboard control.
  • **Luminosity Adjustment (M+/M-):** Adjusts the brightness of the lighting effects.
  • **Speed Adjustment (SPEED-/SPEED+):** Increases or reduces the lighting effect speed.
  • **AUTO:** Executes all lighting patterns sequentially, with each pattern running for 5 seconds.
  • **Monochromatic Shortcut Keys:** Seven dedicated buttons for quick selection of single-color lighting.
  • **MODE-/MODE+:** Adjusts the lighting mode/pattern.

5.2 ARGB Motherboard Synchronization

If you have connected the 5V-3pin ARGB cable to a compatible motherboard, you can control the lighting effects through your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion). Ensure the RC/MB switch on the control box is set to 'MB' (Motherboard) mode.

6. Maintenance

To ensure optimal performance and longevity of your Aigo AR12 fans, follow these maintenance tips:

  • Regular Cleaning: Periodically clean the fan blades and housing to prevent dust buildup, which can impede airflow and increase noise. Use compressed air or a soft brush.
  • Check Connections: Ensure all cables (power, fan, ARGB) are securely connected to the control box and motherboard.
  • Avoid Obstructions: Make sure there are no cables or other components obstructing the fan blades or airflow path.

7. Troubleshooting

If you encounter issues with your Aigo AR12 fans, try the following troubleshooting steps:

  • Fans Not Spinning:
    • Check if the SATA power cable is securely connected to both the power supply and the control box.
    • Ensure the 6-pin fan cables are correctly plugged into the control box.
    • Verify that your power supply is functioning correctly.
  • Lights Not Working/Incorrect Colors:
    • Check the 5V-3pin ARGB connection to the motherboard (if using sync). Ensure it's not connected to a 12V RGB header.
    • If using the remote, ensure the RC/MB switch on the control box is set to 'RC' (Remote Control) mode.
    • Try cycling through different lighting modes and colors using the remote or motherboard software.
    • Ensure the LED strips (if any) are correctly connected to the control box.
  • Excessive Noise:
    • Check for any cables or objects touching the fan blades.
    • Ensure the fans are securely mounted and the anti-shock pads are properly seated.
    • Clean any dust buildup on the fan blades.

8. User Tips

  • Installation Ease: While generally straightforward, take your time during installation, especially with wiring, to ensure all connections are secure and correctly oriented.
  • Control Options: Remember you can switch between remote control and motherboard software control for ARGB lighting. If your motherboard lacks a 5V-3pin ARGB header, the remote control provides full functionality.
  • Airflow Optimization: Pay attention to the fan's wind direction when installing to create an effective airflow path within your PC case for optimal cooling.
  • Compatibility: The control box is designed to work with Aigo AR12 fans. While some users might attempt to connect other fans, compatibility is not guaranteed.

9. Warranty and Support

Aigo products are manufactured to high-quality standards. For any issues or support, please refer to the seller or manufacturer's official support channels. Keep your proof of purchase for warranty claims.

A PDF user manual is available for download: Download User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.