Introduction
Thank you for choosing Sluban Aviation Military Building Blocks. This manual provides essential information for the assembly, safe use, and maintenance of your F/A-18E Super Hornet Fighter and AH-1Z Viper Helicopter models. These building block sets are designed to enhance creativity, problem-solving skills, and fine motor skills. Please read all instructions carefully before beginning assembly.
Safety Information and Warnings
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Not suitable for children under 36 months due to small parts.
- Do not swallow small parts, to prevent choking.
- Avoid contact with eyes; if accidental contact occurs, rinse immediately with water.
- Choking Hazard: Not suitable for kids below 3 years.
Please retain this instruction manual for future reference.
Product Overview
This set includes building blocks to construct two detailed military aircraft models: the F/A-18E Super Hornet Fighter and the AH-1Z Viper Helicopter. Each model features movable parts and includes minifigures for enhanced playability.
F/A-18E Super Hornet Fighter (Model M38-B0928)

The F/A-18E Super Hornet Fighter model, consisting of 682 pieces, shown with a minifigure.
- Number of Blocks: 682 pieces
- Features: Foldable wings and tail fins, retractable landing gear, opening cockpit, includes minifigure.
- Dimensions: Approximately 41.4 cm in length.

Blueprint diagram illustrating the F/A-18E Super Hornet Fighter's dimensions.
AH-1Z Viper Helicopter (Model M38-B0838)

The AH-1Z Viper Helicopter model, consisting of 482 pieces.
- Number of Blocks: 482 pieces
- Features: Rotating main and tail rotors, opening cockpit, includes minifigures.
- Dimensions: Approximately 42.3 cm in length.

Blueprint diagram illustrating the AH-1Z Viper Helicopter's dimensions.
Assembly Instructions
Each building block set comes with a detailed paper manual. Please follow the step-by-step illustrations in the included manual for precise assembly. The general process involves:
- Unpacking: Carefully open the product package and sort the building blocks by type and color if desired.
- Following the Manual: Refer to the provided instruction manual for your specific model (F/A-18E or AH-1Z Viper). Each step will show which blocks to use and where to place them.
- Connecting Blocks: Ensure blocks are firmly pressed together to create a stable structure.
- Adding Details: Attach smaller decorative pieces and minifigures as indicated in the manual.
- Functionality Check: Once assembled, test movable parts like wings, rotors, and cockpits to ensure they function correctly.
A product demonstration video is available to show the features of the assembled models:
Video demonstrating the features and movable parts of the Sluban F/A-18E Super Hornet and AH-1Z Viper building block models.
Operating Instructions
Once assembled, your building block models offer interactive features:
- F/A-18E Super Hornet:
- Wings and tail fins can be folded for storage or display.
- Landing gear can be retracted or extended.
- The cockpit canopy opens to place or remove the minifigure.
- AH-1Z Viper Helicopter:
- Main and tail rotors can be manually rotated.
- The cockpit canopy opens to place or remove minifigures.
Handle the models gently to avoid dislodging blocks. Minifigures can be placed in the cockpits for imaginative play.
Care & Maintenance
- Cleaning: Clean the surface with a soft, dry cloth. Plastic parts may be wiped with a mild detergent solution, then dried thoroughly.
- Inspection: Check regularly for wear or damage. Stop using the product if any parts are broken to prevent injury or further damage.
Storage Conditions
- Store in a cool, dry place.
- Keep away from direct sunlight, heat, moisture, and fire to prevent deformation or damage to the plastic.
- Store building blocks properly to prevent loss or deformation of individual pieces.
Troubleshooting
If you encounter issues during assembly or use, consider the following:
- Missing Pieces: Double-check the packaging and surrounding area. If pieces are genuinely missing, contact customer support.
- Loose Connections: Ensure each block is firmly pressed into place. Sometimes a slight adjustment can improve stability.
- Difficulty with Assembly: Review the instruction manual carefully, paying close attention to the orientation of pieces. Sometimes a small detail can be overlooked.
- Damaged Parts: If parts are broken or warped, discontinue use and contact customer support for replacements.
Specifications
| Attribute | Detail |
|---|---|
| Brand Name | SLUBAN |
| Model Number | 928 (F/A-18E: M38-B0928, AH-1Z Viper: M38-B0838) |
| Block Size | Small building block (Compatible with Lego) |
| Plastic Block Shape | Self-Locking Bricks |
| Plastic Type | ABS |
| Material | Plastic |
| Is Electric | No Battery |
| Gender | Unisex |
| Recommended Age | 6-12Y, 14+y |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 25 cm x 21 cm x 10 cm |
| Package Weight | 0.722 kg |
User Tips
- These building blocks are compatible with Lego blocks, allowing for expanded creative possibilities.
- Assembly helps in enhancing creativity, problem-solving skills, and fine motor skills.
- Minifigures are included and can be placed in the cockpits of both models.
Frequently Asked Questions (FAQ)
- Q: What is the product category of these building blocks?
- A: These fall under the category of small building block toys.
- Q: What type of toy is this?
- A: It is a small building block toy, specifically military aircraft models.
- Q: What are the benefits of using these building blocks?
- A: Benefits include enhancing creativity, problem-solving skills, and fine motor skills.
- Q: What are its distinctive features?
- A: A distinctive feature is that these blocks are compatible with Lego blocks.
Warranty and Support
For any issues with missing or damaged parts, or for further assistance, please contact the seller directly. Ensure you have your purchase details and model information ready when contacting support.
This product is certified with ABS / CE, CCC, EN71 standards, ensuring quality and safety compliance.

Image showing both models, representing the product's overall quality and design.