PowMr POW-M60-PRO

Contents

PowMr MPPT 60A Solar Charger Controller User Manual

Model: POW-M60-PRO

1. Introduction

Thank you for choosing the PowMr MPPT 60A Solar Charger Controller. This device is designed to efficiently manage power flow from your solar panels to your battery bank, ensuring optimal charging and system protection. It features advanced Maximum Power Point Tracking (MPPT) technology to maximize energy harvest from your photovoltaic (PV) array.

PowMr MPPT 60A Solar Charger Controller with packaging
PowMr MPPT 60A Solar Charger Controller and its packaging.

2. Key Features

  • MPPT 60A solar charge controller.
  • 100% MPPT technology for maximum power point tracking.
  • 0 Layer design for easy installation and setup.
  • Built-in DSP controller with high performance.
  • Automatic voltage recognition for 12V/24V/36V/48V battery banks.
  • 3-stage charging algorithm to optimize battery performance and lifespan.
  • Comprehensive protection features: Overcharge protection, Input PV polarity reverse protection, Output limited current protection, Over-temperature protection.
  • Troubleshooting promotion function for easier fault identification.
  • Compatible with various battery types including sealed lead acid, vented gel, NiCd, and lithium batteries.
  • Easy to mount design.

3. Technical Specifications

FeatureSpecification
ModelPOW-M60-PRO
Charging ModeMPPT Maximum Power Point Tracking automatically
Charging Stages3-stage: Constant Current (MPPT), Constant Voltage (Absorption Voltage), Floating Charge
System Voltage RecognitionDC12V/24V/36V/48V (Automatic)
12V System Voltage RangeDC9V-DC15V
24V System Voltage RangeDC18V-DC29V
36V System Voltage RangeDC30V-DC39V
48V System Voltage RangeDC40V-DC60V
Soft Start Time<1S
Dynamic Response & Recovery Time>98.1% (Voc is 1.5 or 2 times than battery for best efficiency)
PV Utilization>99%
Max PV Input Voltage (Voc)DC190V (Controller cannot operate at this voltage for extended periods without damage. Refer to Input voltage from PV.)
Max PV Input Power (12V System)720W
Max PV Input Power (24V System)1440W
Max PV Input Power (36V System)2100W
Max PV Input Power (48V System)2800W
Selectable Battery TypeVented/Sealed/Gel/NiCd/Lithium (default is Sealed; user-defined voltage for others)
Absorption Charging VoltageRefer to Batteries charging reference
Floating Charging VoltageRefer to Batteries charging reference
Overcharging Protection Voltage (12V)15V
Overcharging Protection Voltage (24V)30V
Overcharging Protection Voltage (36V)45V
Overcharging Protection Voltage (48V)60V
Rated Output Current60A
Temperature Coefficient±0.02%/ °C
Automatic Temperature Compensation14.2V-(Max temperature-25 °C)*0.3
Output Voltage Ripple-Peak100mv
Output Voltage Accuracy<±1%
Input Anti-intrusion ProtectionYes
Temperature Protection75°C
Temperature Increased ProtectionOutput power reduces when >70°C, normal when <55°C
Fan-on Temperature>40°C
Fan-off Temperature<35°C
Acoustic Noise<40dB
Cooling WayForced air cooling
ComponentsImported materials, Accord to EU standards, Industrial grade range.
Environmental RequirementsMeet 2002/95/EC; No cadmium, hydrides, and fluorides
Security LevelAccord to CE, PSE, FCC, EMC, EN60950
Electromagnetic CompatibilityAccord to EN6W00, EN55022, EN55024
EnclosureIP21
Net Weight1.3 Kg
Gross Weight1.6 Kg
PowMr MPPT 60A Solar Charger Controller display and dimensions
Controller dimensions and display details.

4. Safety Instructions

Please read all instructions and warnings in this manual before installation and operation. Keep this manual for future reference.

  • Ensure all wiring is correctly polarized and securely connected to prevent damage to the controller or other components.
  • Always disconnect the solar panel and battery power before installing or adjusting the controller.
  • Install the controller in a well-ventilated area, away from flammable materials and direct sunlight.
  • Do not disassemble or attempt to repair the controller yourself. Contact qualified personnel for service.
  • Wear appropriate personal protective equipment (PPE) during installation, including gloves and eye protection.
  • Ensure the battery type selected on the controller matches your actual battery to prevent overcharging or undercharging.

5. Installation

Follow these steps for proper installation of your MPPT solar charge controller:

  1. Mounting the Controller: Choose a suitable location for mounting the controller. It should be indoors, protected from direct sunlight, high temperatures, and water. Ensure adequate airflow around the unit for cooling. The controller has mounting holes for secure attachment.
  2. Wiring Order: Connect the components in the following order to ensure safety and proper operation:
    1. Connect the Battery: Connect the battery to the controller's battery terminals. Ensure correct polarity (positive to positive, negative to negative). The controller will automatically detect the battery voltage.
    2. Connect the Solar Panel: Connect the solar panel array to the controller's PV input terminals. Ensure correct polarity. The controller will begin charging the battery.
    3. Connect the DC Load (Optional): If you have a DC load, connect it to the controller's load terminals. Ensure correct polarity.
System Diagram for PowMr MPPT 60A Solar Charger Controller
System Diagram: Correct installation order for PV panel, controller, battery, and loads.
Detailed wiring diagram for PowMr MPPT 60A Solar Charger Controller
Detailed wiring connections for PV, battery, and DC load.

Video: Unboxing and Basic Connection Demonstration

This video demonstrates the unboxing of the PowMr MPPT 60A Solar Charger Controller and a basic connection procedure for the battery and solar panels.

6. Operation

Once installed, the controller will automatically begin operating. The display provides real-time information about your solar system.

  • Display Interface: The controller features a 0-layer screen that shows various parameters such as solar panel voltage/current, charging power/current, battery voltage, work mode, and system status.
  • Button Functions: Use the buttons below the display to navigate through the different screens and adjust settings.
  • Battery Type Selection: Ensure the correct battery type is selected in the controller's settings to match your connected battery (e.g., Sealed, Gel, Flooded, NiCd, Lithium). This is crucial for proper charging and battery longevity.
Supported battery types and 4-stage charging process
Supported battery types and the 4-stage charging process (Bulk, Boost, Float, Equalization).

7. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your solar charge controller:

  • Cleaning: Periodically clean the controller's exterior with a dry cloth to remove dust and debris. Ensure ventilation openings are clear.
  • Connections: Check all wiring connections regularly to ensure they are tight and free from corrosion. Loose connections can cause overheating and damage.
  • Battery Inspection: Inspect your batteries for any signs of damage, corrosion, or leakage. Ensure battery terminals are clean.
  • Environmental Check: Verify that the installation environment remains within the recommended temperature and humidity ranges.

8. Troubleshooting

This section addresses common issues you might encounter with your solar charge controller.

  • No Display/Power:
    - Check battery connections and ensure they are secure and correctly polarized.
    - Verify the battery voltage is within the controller's operating range.
  • No Charging from PV:
    - Check solar panel connections and polarity.
    - Ensure there is sufficient sunlight and the solar panels are producing voltage.
    - Verify PV input voltage is within the controller's specified range (e.g., 12V system: DC20V-DC80V).
  • Battery Not Fully Charged:
    - Confirm the correct battery type is selected in the controller settings.
    - Check for shading on solar panels.
    - Ensure PV input power is sufficient for the battery bank size.
  • Over-temperature Warning:
    - Ensure the controller is installed in a well-ventilated area.
    - Clear any obstructions around the cooling fins.
    - Reduce load if possible.
  • Error Codes: Refer to the controller's display for specific error codes and consult the full manual (if available) for detailed explanations.
Protection features of PowMr MPPT 60A Solar Charger Controller
Overview of the controller's built-in protection features.

9. User Tips

  • LiFePO4 Battery Compatibility: The controller is compatible with LiFePO4 batteries. Ensure you select the 'Lithium' battery type in the settings for proper charging parameters.
  • Grounding: The controller features a 'Positive Ground' design. This means the positive terminal of the battery and PV array are connected to the system's ground. Ensure your system's grounding aligns with this specification.
  • Initial Configuration: Some users have found it helpful to confirm initial configuration settings, especially battery type, to ensure optimal performance. If unsure, consult the full manual or contact support.

10. Warranty and Support

The PowMr MPPT 60A Solar Charger Controller comes with a 2-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Ensure you have your product model number (POW-M60-PRO) and purchase details available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.