1. Introduction
Thank you for choosing the JJC LED-ARM2 Macro Arm Light. This versatile lighting solution is designed to illuminate your close-up subjects in macro photography, providing optimal lighting for detailed shots. Featuring heat-free technology, dual flexible arms, and adjustable brightness, it's an essential tool for enhancing your photographic experience. Please read this manual carefully before use and keep it for future reference.

2. Safety Information
- Do not disassemble or attempt to repair the product yourself.
- Do not expose the product to high temperatures exceeding 45°C (e.g., leaving it in a car trunk).
- The product is not waterproof. Keep it away from rain, snow, and high humidity conditions.
- Do not clean the product with organic solvents or alcohol-based liquids.
3. Package Contents
Please check the package to ensure all items are present:
- Macro Arm Light x1
- 1.5m Type-C Cable x1
- Instruction Manual x1
4. Parts Identification
- LED Light (x2)
- Flexible Arm (x2)
- Mode Switch Button
- Brightness - Button
- Brightness + Button
- Display Screen
- Type-C IN Port
- Locking Knob
- Cold Shoe Mount
- 1.5m Type-C Cable (included in package)

5. Setup
Mounting the LED Light to Your Camera
The LED-ARM2 features a cold shoe mount design for easy attachment to most DSLR/Mirrorless cameras with a standard hot shoe.
- Gently slide the cold shoe mount of the LED-ARM2 into your camera's hot shoe.
- Rotate the locking knob clockwise to securely fasten the light to your camera.


6. Operating Instructions
Power On & Power Off
- To turn on the LED light, press and hold the Mode Switch button for approximately 3 seconds.
- To turn off the LED light, press and hold the Mode Switch button again for approximately 3 seconds.
Mode Switching
The LED light supports three lighting modes: Left Light, Right Light, and Double Lights. These modes play circularly.
- Short press the Mode Switch button to cycle through the different lighting modes.

Adjusting Brightness
The LED light offers ten adjustable brightness levels in each lighting mode.
- Short press the Brightness '-' Button to decrease the light's brightness.
- Short press the Brightness '+' Button to increase the light's brightness.

7. Charging
The Macro Arm Light has a built-in 600mAh rechargeable battery. When the battery is low, please charge it using the included 1.5m Type-C cable.
- Connect the Type-C cable to the Type-C IN Port on the control unit and to a 5V/1A power source.
- The indicator light will flash while charging and remain constant when charging is complete.
- Charging time is approximately 2 hours.

Lighting Time
- Maximum Lighting Time: Approximately 13 hours 30 minutes (at the lowest brightness level in Double Lights Mode).
- Minimum Lighting Time: Approximately 1 hour 25 minutes (at the highest brightness level in Double Lights Mode).
8. Specifications
| Feature | Specification |
|---|---|
| Material | ABS+Silicone+Metal |
| Size (WxHxD) | 360.1 x 65.4 x 43.2mm (14.2 x 2.6 x 1.7") |
| Weight | 290g |
| Power Source | USB (Built-in 600mAh Battery) |
| Power (W) | 1W |
| Color Temperature | 5600K |
| Color Rendering Index (CRI) | 95+ |
| Lighting Modes | 3 (Left, Right, Double Lights) |
| Brightness Levels | 10 Adjustable Levels |
| Max. Length of Flexible Arm | 290.2mm (11.4") |
| Charging Time | Around 2 Hours |
| Min. Lighting Time | 1 Hour 25 Minutes (Highest Brightness) |
| Max. Lighting Time | 13 Hour 30 Minutes (Lowest Brightness) |
| Display | Yes |
| High-speed synchronous (HSS) | Yes |
| TTL | No |
| Certification | CE |


9. Compatibility
The JJC LED-ARM2 Macro Arm Light is compatible with most DSLR and Mirrorless cameras that feature a standard hot shoe. Below are some examples of compatible camera models:
Canon
- EOS R, R3, R5, R6, R7, R10, RP, Ra
- EOS M50, M200, M100, M6, M5, M3
- EOS 1D series, 5D series, 6D series, 7D series
- 90D, 80D, 77D, 70D, 60D
- 850D, 800D, 200D, 200DII
- 1500D, 1300D, 3000D
- EOS Rebel SL1, SL2, SL3; T8i, T7, T7i, T6, T6i, T6s, T5, T5i…
Nikon
- Z5, Z6, Z6 II, Z7, Z7 II, Z50, Z fc, Z9, Z30
- D850, D810, D780, D750, D610, D500
- D7500, D7200, D5600, D5500, D5300, D3500, D3400…
Sony
- A7 series, A7R series, A7S series, A9 series, A99 series
- A7C, A6600, A6500, A6400, A6300, A6100, A6000…
Fujifilm
- X100V, X100F, X100T, X100S, X100
- X-T1, X-T2, X-T3, X-T4, X-T5, X-T10, X-T20, X-T30
- X-E4, X-E3, X-PRO1, X-PRO2, X-PRO3, X-S10, X-A10…
Olympus
- OM System OM-5, OM-1, OM-D E-M10 series, E-M5 series, E-M1 series…
And many more DSLR/Mirrorless cameras with a standard hot shoe.
10. Troubleshooting (FAQ)
- Q: Does this work with Sony DSLR cameras?
- A: Yes, this item fits most DSLR/Mirrorless cameras with a standard hot shoe.
- Q: What is the effective distance of this light?
- A: We recommend that the shooting distance should not exceed 1 meter. For the best results, aim for a shooting distance within 30cm.
- Q: How long does it take to fully charge, and how long can it be used?
- A: It takes about 2 hours to charge with a 5V/1A charger. When using the lowest brightness, it can be used for approximately 13.5 hours. At the highest brightness, it can be used for about 1.5 hours.
11. User Tips
- **Memory Function**: The LED light has a memory function. If you turn it off and then on again, it will recall the last used lighting mode and brightness level.
- **Default Mode Reset**: To quickly switch to the default mode of "Double Lights" at the fifth brightness level, press the Mode Switch button three times consecutively.
- **Brightness Feedback**: When the brightness reaches its lowest or highest level, the LED light will flash three times to indicate this.
- **Optimal Distance**: For the sharpest and most illuminated macro shots, position your subjects within 30cm of the light source.
12. Maintenance
- To clean the product, use a soft, dry cloth. Avoid using organic solvents or alcohol-based liquids, as these can damage the device.
- Store the Macro Arm Light in a cool, dry place away from direct sunlight and extreme temperatures.
- Ensure the Type-C port is free from dust and debris to maintain proper charging functionality.
13. Warranty and Support
JJC is not liable for possible damages due to product misuse. All specifications are based on JJC's testing standards and are subject to change without prior notice. For further assistance or inquiries, please contact JJC Official Store customer support.
You can also refer to the official user manual PDF for more detailed information: View User Manual (PDF)
Manufacturer: SHENZHEN JJC PHOTOGRAPHY EQUIPMENT Co., Ltd.
Website: www.jjc.cc
Email: service@jjc.cc
14. Product Demonstration Video
Watch this video for a visual guide on setting up and using your JJC LED-ARM2 Macro Arm Light:





