Introduction
The RETEKESS TR606 is a versatile portable radio featuring FM/AM reception, cassette playback, and voice recording capabilities. Its compact design makes it easy to carry, and it offers multiple power supply options for convenience. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.
Parts Introduction
Familiarize yourself with the components of your TR606 radio:
- Rod Antenna
- Microphone Jack
- Earphone Jack
- Tuning Knob
- Function Switch (AM/FM/Tape/OFF)
- Battery Door
- Type-C USB Power Jack
- Stop Button
- Play Button
- Fast Forward Button
- Rewind Button
- Record Button
- Volume Control
- AM/FM Dial Scale
Setup
Power Supply
The TR606 radio supports two power supply methods:
-
Battery Power:
Open the battery compartment door (6) by pushing down. Insert 2 x AA/LR6 batteries, ensuring correct polarity. Do not mix new and old or different types of batteries. Remove batteries if the appliance will not be used for a long time to prevent leakage.
Insert 2 x AA batteries into the compartment, observing polarity. -
DC Power Supply:
Plug a DC 4.5V adapter (not included) into the Type-C USB power jack (7) on the unit. It is recommended to keep the radio charged when using it via DC power.
Connect the USB charging cable to the DC 4.5V input jack.
Antenna Operation
- For FM radio, extend the Rod Antenna (1) fully for the best reception.
- For AM radio, the unit uses an internal magnetic antenna. Rotate the radio to find the optimal reception direction.
Operating Instructions
Radio Reception
- Set the Function Switch (5) to AM or FM.
- Use the Tuning Knob (4) to select a radio station.
- Adjust the Volume Control (13) to your desired listening level.
- To switch off the radio, set the Function Switch (5) to OFF.
Cassette Operation
Open the cassette door and close it after inserting a tape.
A. Cassette Playback
- Press the Play Button (9) to start tape playback.
- Adjust the volume using the Volume Control (13).
- Use the Fast Forward (10) or Rewind (11) buttons to navigate the tape.
- Press the Stop Button (8) at any time to stop playback. Playback automatically stops when the tape reaches its end.
B. Cassette Recording
-
Recording from Built-in Microphone:
Press the Record Button (12) and Play Button (9) simultaneously. The tape will record voice or sound via the built-in microphone.
-
Recording from External Microphone:
Plug an external microphone into the Microphone Jack (2). Press the Record Button (12) and Play Button (9) simultaneously. The tape will record voice or sound via the external microphone.
Connect an external microphone to the 3.5mm MIC jack for recording. -
Recording from Radio:
- Set the Function Switch (5) to AM or FM and tune to your desired station using the Tuning Knob (4).
- Press the Record Button (12) and Play Button (9) simultaneously. The tape will record the sound from the radio.
Remarks on Recording:
- Press the Stop Button (8) to stop the recording operation.
- The Volume Control (13) does not affect the recording level due to the ALC circuit inside the unit.
- When recording from the built-in or external microphone, speak at a distance of approximately 5 to 8cm from the microphone for best results and to reduce saturation risks.
- When recording from AM radio, you may receive interference.
- Protection against accidental erasure: Cassettes are provided with protective tabs. To prevent accidental erasure, remove the protective tab(s) located at the top of the cassette. If you need to re-record on a protected cassette, cover the hole with adhesive tape.
Earphone Usage
When listening to the radio or tape, you can use earphones by plugging them into the Earphone Jack (3) to avoid disturbing others.
Maintenance
To ensure the best performance and longevity of your TR606 radio:
-
Cleaning Playback Heads and Pinch Rollers:
Regularly clean the recording-playback heads and pinch rollers. If these parts become dirty, the sound quality of your recordings may be altered and the tape speed may be modified.
To clean:
- Open the cassette door.
- Press the Play Button (9).
- Using a cotton bud soaked in a special cleaning fluid or spirit, carefully clean the playback and recording heads until all dust or magnetic oxide is gone.
- Clean the surface of the pinch rollers and capstans in the same way.
- Dry the recording and playback heads carefully using a soft cloth.
-
Battery Care:
If the sound is distorted or the volume is faint, replace the batteries. Do not use new and old or different types of batteries together. Remove batteries if the appliance will not be used for a long time to prevent leakage.
Troubleshooting
If you encounter any issues with your TR606 radio, refer to the following common solutions:
- Sound distorted or faint volume: This often indicates low battery power. Please change the batteries in time.
- Interference during AM radio reception: Try rotating the radio to find the optimal reception direction, as it uses an internal magnetic antenna.
- Interference during cassette recording from AM radio: Some interference may occur.
Specifications
| Feature | Specification |
|---|---|
| Model Number | TR606 |
| Type | AM / FM Portable Radio |
| Frequency Range | FM: 76-108MHz, AM: 530-1710KHz |
| Speaker | 8Ω 0.5W |
| Output Power | Max 0.6W |
| Audio Output Mode | Stereo |
| Power Supply | DC 4.5V input or 2 x AA battery (not included) |
| Dimensions (WxHxD) | 120 x 91 x 42mm (4.72 x 3.58 x 1.65 inches) |
| Weight | 250g (0.55 lb) (without battery) |
| Enclosure Material | Plastic |
| Hardware Interface | USB |
| Water Resistance Level | Water proof |
| Screen | Yes |
| WIFI | No |
| Bluetooth | No |
| Certification | CE, FCC |
User Tips
- The TR606 can be powered by both AA batteries and a DC 4.5V adapter, offering flexibility for home and portable use.
- When recording, ensure you speak 5-8cm away from the microphone for optimal sound quality and to avoid saturation.
- The radio supports stereo audio output, providing a richer listening experience, especially with headphones.
Warranty and Support
Warranty Information
Most new products carry a two-year manufacturer's warranty from the date of purchase. For warranty service, you will need to provide a receipt proof of purchase from the actual seller.
Exclusions from Warranty Coverage:
- Any product damaged by accident.
- Misuse or abuse of the product, or unauthorized alterations or repairs.
Regulatory Compliance
FCC Requirements:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information:
Do not operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer declared.
CE Requirements:
Henan Eshow Electronic Commerce Co.,Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/6/EU and the WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at www.retekess.com.
Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.
Contact Information
For further support or inquiries, please visit the official website: www.retekess.com
Email: support@retekess.com
Address: 7/F, Sanjiang Building, No.170 Nanyang Road, Hui District, Zhengzhou, Henan, China