TOPPING HS02 Isolator

Contents

TOPPING HS02 USB 2.0 High Performance Audio Isolator

Model: HS02 (TP527)

Brand: TOPPING

1. Introduction

Thank you for purchasing the TOPPING HS02 USB Isolator. We hope it brings you more enjoyment in your music experience! Before making any connections or using this product, we recommend you read this manual first so that you can use all the features of the HS02 correctly and get the most listening pleasure.

2. Package Contents

Please check the package for the following items:

  • HS02 Unit x 1
  • USB Cable x 1
  • User Manual x 1
  • Warranty Card x 1
Contents list of TOPPING HS02: HS02 unit, USB cable, user manual, warranty card.
Figure 2.1: Package Contents

Note: You can download the latest user manual from the official TOPPING website: http://www.topping.audio/.

3. Product Overview

The TOPPING HS02 is a high-performance USB 2.0 audio isolator designed to eliminate ground loop noise and ensure a clean audio signal. It features a fully isolated design, ultra-low latency, and high compatibility with various audio devices.

3.1 Key Features

  • High Performance and High Compatibility
  • Ultra-Low Latency (0.073us typical)
  • Fully Isolated Design to eliminate ground loop noise
  • Isolation withstands up to 1500VDC
  • Supports USB 2.0 transmission at low, full, and high speeds
  • Compatible with high-resolution audio such as PCM32bit/768kHz and DSD512Native

3.2 Physical Description and Interfaces

The HS02 unit is compact and made of aluminum. It features multiple input and output interfaces for versatile connectivity.

Top view of TOPPING HS02 USB Isolator showing USB-B input, Type-C input, input switch, LED indicator, Type-C output, USB-A output, and output switch.
Figure 3.1: HS02 Top View with Interface Labels
Diagram showing the input interfaces (IN1: USB-B, IN2: Type-C) with an input switch, and output interfaces (OUT2: USB-A, OUT1: Type-C) with an output switch, and an LED indicator.
Figure 3.2: HS02 Input and Output Interfaces
Dimensions of the HS02: 5.9cm length, 3.8cm width, 1.8cm height.
Figure 3.3: HS02 Dimensions

4. Setup and Connection

Follow these instructions to connect your HS02:

4.1 Connecting USB-Powered Devices

For USB devices that draw power from the USB port, the HS02 requires an external 5V power supply to ensure sufficient power for reliable operation. Connect the external power supply to the unused input jack of the HS02.

Connection diagram for USB-powered devices: PC connects to HS02 (IN1 or IN2), external 5V DC power connects to the other input of HS02, and HS02 (OUT1 or OUT2) connects to the USB device.
Figure 4.1: Connection for USB-Powered Devices

4.2 Connecting Non-USB-Powered Devices

For USB devices that do not rely on the USB port for power, an external 5V power supply is not required for the HS02.

Connection diagram for non-USB-powered devices: PC connects to HS02 (IN1 or IN2), and HS02 (OUT1 or OUT2) connects to the USB device. No external power supply is shown for HS02.
Figure 4.2: Connection for Non-USB-Powered Devices

4.3 Connection Recommendation

We recommend connecting the HS02 directly to a USB root port on your PC, rather than through a USB hub, for optimal performance and stability.

TOPPING HS02 connected directly to a laptop, isolating a connected audio device.
Figure 4.3: Direct Connection to PC

5. Operating Instructions

5.1 Input and Output Selection

The HS02 features two input interfaces (USB-B and Type-C) and two output interfaces (USB-A and Type-C). You can select the desired input and output using the respective toggle switches on the unit.

  • The input interfaces (IN1: USB-B, IN2: Type-C) are used to connect to your computer.
  • The output interfaces (OUT1: Type-C, OUT2: USB-A) are used to connect to your USB audio device.
Detailed diagram of HS02 interfaces: IN1 (USB-B), IN2 (Type-C), Input switch, LED indicator, Output switch, OUT2 (USB-A), OUT1 (Type-C).
Figure 5.1: Input and Output Switches

5.2 LED Indicator

The LED indicator on the HS02 should be continuously lit when the unit is operating correctly. If the LED is not lit, it indicates an abnormal condition.

6. Maintenance

The TOPPING HS02 is designed for reliable operation with minimal maintenance. Keep the unit clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or solvents.

Ensure proper ventilation around the unit to prevent overheating, although it is designed to heat up only slightly during operation.

7. Specifications

AttributeSpecification
Dimensions (WxHxD)5.9cm x 3.8cm x 1.8cm
Body MaterialAluminum
Weight45g
Power InputDC5V/2A
Power OutputDC5V/800mA
Input InterfacesUSB-B, Type-C
Output InterfacesUSB-A, Type-C
Voltage Isolation>1500VDC
USB InterfaceUSB2.0 (Supports Low, Full, and Hi-speed mode by automatic detection)
Delay0.073us (Typical value)
Built-in BatteryNo
Recommended Headphone Max Impedance< 32 Ohm
OriginMainland China
Comparison table of HS01 vs HS02 features, highlighting HS02's two inputs/outputs, auxiliary power isolation, >1500KV RMS audio signal isolation voltage, and 0.073µs delay.
Figure 7.1: HS02 Feature Comparison
FFT Spectrum graph showing noise reduction of up to 50dB with HS02 compared to without HS02.
Figure 7.2: Noise Elimination Performance
Oscilloscope measurement showing ultra-low latency of 0.073us for the HS02.
Figure 7.3: Ultra-Low Latency Measurement

8. Troubleshooting

If you encounter any issues with your HS02, please refer to the table below for common problems and solutions.

PhenomenonCauseSolution
The computer can't recognize the USB device after connecting HS02Incorrect input/output setting of HS02Check the input switch and the output switch
Audio cable was connected improperlyCheck and reconnect. Try both to connect the USB device to the HS02 before connecting it to the computer, and the other way.
USB port incompatibilityHS02 is compatible with USB 2.0
The USB device already has built-in USB isolationHS02 is not required
USB cable is faultyUse other USB cables

If you still have problems or questions, please contact us at service@tpdz.net.

9. Precautions

  • Do not keep the unit in a hot, humid environment or hit the unit strongly.
  • Opening the case instantly voids the warranty!
  • Indoor use only.
  • TOPPING accepts no liability for any loss or damage arising directly or indirectly from the failure of HS02.
  • For improvement purposes, specifications are subject to changes without prior notice.

10. User Tips

  • The HS02 is highly effective in eliminating ground loop noise, even at high sample rates like 768kHz. It can significantly improve audio clarity.
  • For optimal performance, especially with USB-powered audio devices, consider providing an external 5V power supply to the HS02. This can lead to even better sound quality.
  • The isolator has been noted to improve audio quality from various sources, including Raspberry Pi USB audio.
  • If you are experiencing hissing or unwanted noise in your audio setup, the HS02 is a proven solution for many users.

11. Warranty and Support

The TOPPING HS02 comes with a warranty. Please refer to the included Warranty Card for details regarding coverage and terms. Note that opening the case of the unit will instantly void the warranty.

For technical support, troubleshooting assistance beyond what is provided in this manual, or any other inquiries, please contact TOPPING customer service at service@tpdz.net.

The latest version of this user manual and other product information can be found on the official TOPPING website: http://www.topping.audio/.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.