1. Introduction and Overview
The MILESEEY Thermal Imager is a versatile handheld device designed for accurate temperature measurement and thermal imaging. It is ideal for a wide range of applications including electrical repair, PCB inspection, pipeline detection, HVAC maintenance, and general equipment inspection. Featuring a high infrared resolution and a broad temperature measurement range, this device provides superior detail and clarity for identifying thermal anomalies.
Key features include:
- High Infrared Resolution: 256x192 pixels for clear thermal images.
- Wide Temperature Range: -20°C to 550°C (model dependent).
- Fast Refresh Rate: 20Hz for smooth thermal video.
- Multiple Imaging Modes & Color Palettes: Up to 4 imaging modes and 7 color palettes for diverse analysis.
- Infrared & Visual Camera: For enhanced detail and image fusion (TR256B model).
- Long Battery Life: Up to 12 hours of continuous use.
- PC Software Support: For real-time analysis and reporting.
Product Overview Video
This video demonstrates the MILESEEY thermal imager in various applications, showcasing its features like real-time temperature display, image capture, and use in equipment inspection and HVAC maintenance.
2. Setup
2.1 Charging the Device
The thermal imager is equipped with a Type-C rechargeable battery. Ensure the device is fully charged before first use to maximize battery life and performance.
- Charging Time: Approximately 4 hours for a full charge.
- Operating Time: Up to 12 hours of continuous use on a full charge.

Image: The thermal imager being charged via its Type-C port, highlighting its rechargeable battery feature.
2.2 Power On/Off
To power on the device, press and hold the power button located on the handle. To power off, press and hold the same button until the device shuts down.
2.3 Language Selection
The device supports 13 languages for user convenience. Navigate through the settings menu to select your preferred language.

Image: A visual representation of the 13 languages available for selection on the thermal imager's display.
3. Operating Instructions
3.1 Basic Temperature Measurement
Point the thermal imager at the object or area you wish to inspect. The device will display real-time temperature readings on its 2.8-inch LCD screen. The crosshair in the center of the screen indicates the spot temperature measurement.

Image: The thermal imager in use, showing a thermal image on its 2.8-inch LCD display with temperature range and infrared resolution details.
3.2 High/Low Temperature Auto-Tracking
The device features automatic tracking of the highest, lowest, and center temperatures within the field of view. This helps in quickly identifying critical temperature points.

Image: The thermal imager's display illustrating the high/low temperature auto-tracking feature, marking the hottest, coldest, and central points.
3.3 Imaging Modes and Color Palettes
The thermal imager offers various imaging modes and color palettes to optimize visualization for different inspection scenarios.
- TR256B Model: Features 4 imaging modes (Visible, PIP, Fuse, IR) and 7 color palettes (Iron, Lava, Rainbow, RainbowHC, RdGy, White Hot, Black Hot).
- TR256E Model: Features 4 color palettes (Iron, Rainbow, White Hot, Black Hot).

Image: A visual guide to the multiple color palettes available for the TR256B and TR256E models, demonstrating how different palettes can enhance thermal image clarity.

Image: The thermal imager displaying various image fusion modes including Infrared (IR), Dual Vision, Picture-in-Picture (PIP), and Visible Light, useful for detailed inspections.
3.4 Data Recording and Analysis
The device supports built-in timed snapshots to record equipment temperature in real-time and automatically trace abnormal temperatures. It also features real-time image transmission and SD card support for data storage.

Image: The thermal imager connected to a laptop, demonstrating real-time image transmission and the use of PC software for analysis.
For professional analysis, connect the device to a PC via USB. The dedicated PC software allows for:
- Real-time screen projection.
- Offline heat map analysis.
- Full-frame real-time temperature analysis.
- Real-time point/line/area temperature analysis.
- 3D display of temperature data.

Image: A computer screen showing the professional PC analysis software interface, used for detailed thermal data interpretation.
3.5 LED Fill-in Light
The integrated LED fill-in light ensures normal operation and clear imaging even in dark environments.
4. Maintenance
4.1 Cleaning
To maintain optimal performance, regularly clean the device. Use a soft, dry cloth to wipe the exterior. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.
4.2 Battery Care
To prolong battery life, avoid fully discharging the battery frequently. Recharge the device when the battery level is low. If storing the device for an extended period, ensure it is charged to approximately 50%.
4.3 Storage
Store the thermal imager in a cool, dry place, away from direct sunlight and extreme temperatures. The recommended storage temperature is -20°C to 60°C.
4.4 Durability
The device is designed to be drop-proof up to 2 meters, offering robust performance in various work environments.
5. Troubleshooting
5.1 Common Issues and Solutions
- Device not powering on: Ensure the battery is charged. Connect the device to a Type-C charger and allow it to charge for at least 15 minutes before attempting to power on again.
- Unclear thermal images: Check if the lens is clean. Adjust the focus if your model supports it, or try different color palettes to enhance contrast.
- Inaccurate temperature readings: Ensure the emissivity setting is appropriate for the material being measured. Refer to the device's settings for emissivity adjustments.
- Cannot connect to PC: Verify the USB cable connection. Ensure the PC software is correctly installed and updated.
5.2 Specific Application Queries
- Detecting electrical wiring in walls: Thermal imagers detect surface temperature. While they cannot 'see' through thick concrete walls, they can reveal heat signatures on the wall surface caused by overloaded or faulty electrical wiring behind it.
- Detecting water leakage: Yes, the thermal imager can detect water leakage by identifying temperature differences on surfaces caused by moisture. Cold spots may indicate water intrusion or evaporation.
- Macro lens for PCB inspection: For very fine detail in PCB inspection, a specialized macro lens might be beneficial. Please contact MiLESEEY customer support for information on compatible accessories.
6. Specifications

Image: A table outlining the key differences and similarities between the TR256E and TR256B models, including camera type, measuring range, visual resolution, imaging mode, and palette.
| Attribute | Value |
|---|---|
| Brand Name | MiLESEEY |
| Style | Handheld |
| Display Size | 2.8 - 3.9 Inches (2.8 inch LCD, 320x240) |
| Thermal Pixels | 256*192 |
| Minimum Temperature | -20 °C |
| Maximum Temperature | 350 °C (TR256E), 550 °C (TR256B) |
| Accuracy | +/- 2°C |
| Frame Rate | 20Hz |
| Field of View (FOV) | 56°x42° (Focus-free) |
| Infrared Spectral | 8-14um |
| Pixel Size | 12um |
| NETD | 40mk |
| PC Software | Yes |
| Drop Proof | 2m |
| Working Temperature | -10 °C to 50 °C |
| Storage Temperature | -20 °C to 60 °C |
| Battery Included | Yes |
| High-concerned chemical | None |
| Certification | CE, FCC |
| Origin | Mainland China |
7. User Tips
- Optimizing Detection: When inspecting for issues like water leaks or electrical faults, look for distinct temperature differences. These anomalies are often more indicative of a problem than absolute temperature values.
- Palette Selection: Experiment with the various color palettes (e.g., Iron, Rainbow, White Hot) to find the one that best highlights the temperature variations for your specific inspection task. Some palettes are better for high contrast, while others offer more subtle gradients.
- Detailed Analysis: For in-depth diagnostics and reporting, utilize the PC analysis software. Connecting the imager to your computer allows for real-time screen projection, offline heat map analysis, and detailed temperature data interpretation, including 3D displays.
- Low-Light Conditions: Don't hesitate to use the built-in LED fill-in light when working in dimly lit or dark environments. This ensures you can still capture clear visual context alongside your thermal images.
- Automated Monitoring: Leverage the built-in timed snapshot feature to automatically record temperature data over time. This is particularly useful for monitoring equipment for gradual temperature changes or intermittent issues.
8. Warranty and Support
For any technical assistance, warranty claims, or inquiries regarding accessories (such as macro lenses), please contact MiLESEEY customer support. Ensure you have your product model and serial number ready for efficient service.
MiLESEEY is committed to providing certified original products and ensuring the security and privacy of your personal information. We do not share your personal details with any third parties without your consent and protect your privacy with secure practices.