1. Introduction
The Sugon-212 is a versatile 2-in-1 soldering station designed for precision electronic repair and welding tasks. It integrates a powerful 760W hot air gun and a T12 handle soldering iron, both featuring independent temperature control and digital displays. This manual provides essential information for the safe and effective operation, setup, and maintenance of your Sugon-212 soldering station.
2. Safety Information
Please read and understand all safety instructions before using the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always operate the soldering station in a well-ventilated area to avoid inhaling harmful fumes.
- The hot air gun and soldering iron tips reach very high temperatures. Avoid direct contact with skin or flammable materials.
- Ensure the power supply voltage matches the device's requirements (AC 220V~50Hz / 110V~60Hz).
- Do not use the device near water or in damp conditions.
- Always place the hot air gun in its holder and the soldering iron in its stand when not in use.
- Disconnect the power plug from the outlet before cleaning or performing maintenance.
- Keep out of reach of children.
3. Package Contents
Verify that all items are present in your package. Contents may vary slightly based on the purchased set (Set 1 or Set 2).
Set 1 Includes:
- SUGON-212 Main Unit x 1
- Hot Air Gun Nozzles x 4 (2x Direct Wind, 2x Whirlwind)
- Ground Wire x 1
- Heat Gun Handle Heating Element x 1
- Soldering Iron Handle Heater x 1
- Soldering Iron Tips x 5 (T12-I, T12-ILS, T12-JL02, T12-K, T12-BC2)
- Desoldering Aid Tool x 6
- Anti-static Brush x 1
- Tin Sucker x 1
- Suction Wire x 1
- Tweezers x 2 (Straight, Curved)
- Rosin x 1
Set 2 Includes:
- SUGON-212 Main Unit x 1
- T12-I Soldering Iron Tip x 1
- Hot Air Gun Nozzles x 4 (2x Direct Wind, 2x Whirlwind)
- Ground Wire x 1

4. Product Overview
The Sugon-212 features a user-friendly interface with separate controls for the hot air gun and soldering iron. The integrated LCD digital display provides real-time temperature and air volume readings.

Key Components:
- Hot Air Gun: Used for desoldering and heating components. Features dual-mode air (direct and cyclone) and adjustable air volume.
- Hot Air Gun Temperature Display: Shows the current temperature of the hot air gun.
- Air Volume Display: Indicates the current air flow setting.
- Hot Air Gun Storage Channel Buttons (CH1, CH2, CH3): Allows saving and recalling preferred temperature and air volume settings.
- Air Volume Adjustment: Buttons to increase or decrease air flow.
- Hot Air Gun Temperature Adjustment: Buttons to increase or decrease hot air temperature.
- Hot Air Power Switch: Turns the hot air gun function on/off.
- Welding Handle (Soldering Iron): T12 integrated handle for precise soldering.
- Welding Set Temperature Display: Shows the target temperature for the soldering iron.
- Actual Welding Temperature Display: Shows the real-time temperature of the soldering iron tip.
- Welding Temperature Storage Channel Buttons (CH1, CH2, CH3): Allows saving and recalling preferred soldering iron temperature settings.
- Welding Temperature Adjustment: Buttons to increase or decrease soldering iron temperature.
- Welding Power Switch: Turns the soldering iron function on/off.
- Cleaning Wire Ball: For cleaning the soldering iron tip.
- Heat Gun Metal Joint: Connection point for the hot air gun.




5. Specifications
| Feature | Specification |
|---|---|
| Model Number | Sugon-212 |
| Maximum Power | 760W |
| Power Supply Voltage | AC 220V~50Hz / 110V~60Hz |
| Hot Air Gun Temperature Range | 100°C-500°C (212°F-932°F) |
| Hot Air Gun Temperature Stability | ±2°C |
| Hot Air Gun Air Mode | Oil-containing motor (Dual-mode: Direct wind & Cyclone) |
| Hot Air Gun Air Flow | 34-100 L/min |
| Soldering Iron Temperature Range | 200°C-500°C (392°F-932°F) |
| Soldering Iron Temperature Stability | 1°C |
| Soldering Iron Power | 60W |
| Handle Type | T12 Handle |
| Certification | CE |
| Origin | Mainland China |
6. Setup Instructions
- Unpacking: Carefully remove all components from the packaging. Retain the packaging for future storage or transport.
- Placement: Place the main unit on a stable, heat-resistant, and well-ventilated surface. Ensure there is enough space around the unit for proper airflow.
- Connect Hot Air Gun: Connect the hot air gun cable to the designated port on the front panel (labeled "HEAT GUN"). Secure the connection by tightening the collar. Place the hot air gun in its holder on the side of the main unit.
- Connect Soldering Iron: Connect the soldering iron cable to the designated port on the front panel (labeled "IRON"). Secure the connection. Place the soldering iron in its stand.
- Power Connection: Ensure the power switch on the unit is in the "OFF" position. Connect the power cord to the main unit and then plug it into a grounded electrical outlet matching the required voltage (220V or 110V).
- Initial Check: Before powering on, double-check all connections to ensure they are secure.
7. Operating Instructions
7.1 Power On/Off
- Flip the main power switch to "ON". The LCD display will illuminate.
- To power off, flip the main power switch to "OFF". The hot air gun will enter a cooling cycle before completely shutting down.
7.2 Hot Air Gun Operation
- Turn On: Flip the "HEAT GUN" power switch to "ON".
- Temperature Adjustment: Use the ▲ and ▼ buttons under "HEAT GUN TEMP" to set the desired temperature (100°C-500°C). The display will show the set temperature and actual temperature.
- Air Volume Adjustment: Use the ▲ and ▼ buttons under "AIR" to adjust the air flow (34-100 L/min).
- Using Storage Channels (CH1, CH2, CH3):
- To save a setting: Adjust temperature and air volume to your desired levels. Press and hold one of the CH buttons (CH1, CH2, or CH3) until the display indicates the setting is saved.
- To recall a setting: Briefly press the corresponding CH button (CH1, CH2, or CH3). The hot air gun will automatically adjust to the saved parameters.
- Operation: Pick up the hot air gun from its holder. It will automatically start heating and blowing air. Direct the hot air stream towards the component to be worked on.
- Dormancy Function: When the hot air gun is placed back into its holder, it will automatically enter a cooling mode and then go into dormancy (sleep mode) to save energy and prolong heating element life.
7.3 Soldering Iron Operation
- Turn On: Flip the "IRON" power switch to "ON".
- Temperature Adjustment: Use the ▲ and ▼ buttons under "WELDING TEMP" to set the desired temperature (200°C-500°C). The display will show the set temperature and actual temperature.
- Using Storage Channels (CH1, CH2, CH3):
- To save a setting: Adjust temperature to your desired level. Press and hold one of the CH buttons (CH1, CH2, or CH3) until the display indicates the setting is saved.
- To recall a setting: Briefly press the corresponding CH button (CH1, CH2, or CH3). The soldering iron will automatically adjust to the saved temperature.
- Operation: Pick up the soldering iron from its stand. It will quickly heat to the set temperature. Apply solder as needed.
- Induction Dormancy: When the soldering iron is placed back into its stand, it will automatically enter a dormancy state, stopping heating to save energy and extend tip life. It will reactivate when picked up.
7.4 Temperature Unit Conversion (°C/°F)
The unit supports switching between Celsius and Fahrenheit display modes. Refer to the product's specific button combination or menu option for this function, usually indicated by a dedicated button or a long press on a temperature adjustment button.
8. Maintenance
- Soldering Iron Tip Cleaning: Regularly clean the soldering iron tip using the provided cleaning wire ball or a damp sponge. This helps maintain optimal heat transfer and extends tip life.
- General Cleaning: Ensure the unit is unplugged and cooled down before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Nozzle Maintenance: Keep hot air gun nozzles clean and free of debris to ensure consistent airflow.
- Heating Element Replacement: If the hot air gun or soldering iron heating elements fail, they can be replaced. Refer to the package contents for spare heating elements (if included in your set) and consult a qualified technician if unsure.
- Storage: Store the unit in a dry, dust-free environment when not in use.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | No power from outlet; power cord loose; main power switch off. | Check power outlet, ensure power cord is securely connected, turn main power switch to ON. |
| Hot air gun not heating or no airflow. | Hot air gun switch off; handle not properly seated in holder (if dormancy active); heating element failure. | Ensure "HEAT GUN" switch is ON. Lift and reseat the hot air gun. If issue persists, heating element may need replacement. |
| Soldering iron not heating. | Soldering iron switch off; iron not properly seated in stand (if dormancy active); heating element failure. | Ensure "IRON" switch is ON. Lift and reseat the soldering iron. If issue persists, heating element may need replacement. |
| Temperature display is inaccurate or unstable. | Sensor issue; improper calibration (unlikely for user); environmental factors. | Ensure proper ventilation. The unit has high temperature stability (±2°C for hot air, 1°C for soldering iron). If persistent, contact support. |
10. User Tips
- T12 Handle Advantage: The T12 handle offers higher heating efficiency and a longer service life for the soldering iron tip compared to older 936-type handles. This means faster heat-up times and more consistent performance.
- Dual-Mode Air Gun: Utilize the direct wind nozzles for focused heat on smaller components and the cyclone (whirlwind) nozzles for broader, more even heating on larger areas or for preheating.
- Temperature Memory: Make use of the three one-key quick temperature adjustment functions (CH1, CH2, CH3) for both the hot air gun and soldering iron. This allows you to quickly switch between frequently used temperature and air volume settings for different tasks.
- Dormancy Feature: The automatic induction dormancy function for both tools is a great feature for safety and energy saving. Always place the tools back in their holders when not actively soldering or desoldering.
- Temperature Stability: The Sugon-212 is designed for excellent temperature stability (±2°C for hot air, 1°C for soldering iron), ensuring precise work. Allow a few moments for the temperature to stabilize after making adjustments.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.