Introduction
Thank you for choosing the Deli Adjustable Wrench. This manual provides essential information for the safe and effective use, maintenance, and care of your new tool. Please read it thoroughly before first use and keep it for future reference.
The Deli Adjustable Wrench is a versatile hand tool designed for various fastening tasks. It features a durable high-carbon steel construction, a comfortable TPR handle, and a laser-etched scale for precise adjustments. Available in 8-inch (EDL30108) and 10-inch (EDL30110) sizes, it is suitable for working with metal components.
Safety Information
WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Always wear appropriate personal protective equipment (PPE), such as safety glasses, when using hand tools.
- Ensure the wrench jaws are properly seated on the fastener to prevent slipping and injury.
- Do not use the wrench if it is damaged or worn.
- Do not use the wrench as a hammer or pry bar.
- Keep out of reach of children to avoid damage or injury.
Product Components
The Deli Adjustable Wrench consists of the following main components:
- Adjustable Jaw: The movable part that grips the fastener.
- Fixed Jaw: The stationary part that grips the fastener.
- Knurl (Adjustment Screw): Used to open and close the adjustable jaw to fit different fastener sizes.
- Laser-Etched Scale: Provides precise measurement markings for accurate jaw adjustment.
- Handle: Ergonomically designed with TPR (Thermoplastic Rubber) for a comfortable and secure grip.
- Chrome Plated Surface: Provides an elegant appearance and rust prevention.
Operating Instructions
1. Selecting the Correct Size
Choose between the 8-inch (EDL30108) or 10-inch (EDL30110) wrench based on the size of the fastener and the required leverage.
2. Adjusting the Jaw
- Hold the wrench firmly by the handle.
- Rotate the knurl (adjustment screw) with your thumb to open or close the adjustable jaw.
- Align the jaws with the fastener (nut or bolt head).
- Tighten the knurl until the jaws fit snugly around the fastener, ensuring there is no play. The laser-etched scale can assist in precise sizing.
3. Applying Torque
- Once the jaws are securely gripping the fastener, apply steady pressure to the handle in the desired direction (tightening or loosening).
- Always pull the wrench towards you rather than pushing away to maintain better control and prevent injury.
- Ensure the wrench is fully engaged with the fastener to prevent rounding off the edges.
Maintenance and Care
- Cleaning: After each use, wipe the wrench clean with a dry cloth to remove dirt, grease, and moisture.
- Rust Prevention: The chrome-plated surface helps prevent rust. For prolonged storage or use in humid environments, apply a light coat of rust-preventative oil.
- Lubrication: Occasionally apply a small amount of light oil to the knurl and movable jaw mechanism to ensure smooth operation.
- Storage: Store the wrench in a dry place, away from direct sunlight and moisture. Keep it out of reach of children.
- Inspection: Regularly inspect the wrench for any signs of wear, damage, or deformation. Discontinue use if any issues are found.
Troubleshooting
Most issues with adjustable wrenches stem from improper use. Follow these guidelines to avoid common problems:
- Wrench Slipping: Ensure the jaws are tightly adjusted to the fastener. Do not use a wrench that is too large or has worn jaws.
- Rounding Fastener Edges: This usually occurs when the wrench is not properly seated or is too loose. Always ensure a snug fit before applying force.
- Stuck Adjustment Knurl: Clean the knurl and apply a small amount of lubricant. If it remains stuck, do not force it, as this may damage the mechanism.
If the wrench is damaged or not functioning correctly, discontinue use and consider replacement.
Specifications
| Feature | Detail |
|---|---|
| Brand | Deli |
| Model Numbers | EDL30108 (8 Inches), EDL30110 (10 Inches) |
| Type | Adjustable Spanner |
| Material | High Carbon Steel + TPR Handle |
| Suitable For | Metal |
| 8-inch Model (EDL30108) Size | 8 inches (200mm) |
| 8-inch Model (EDL30108) Max Opening | 28mm |
| 10-inch Model (EDL30110) Size | 10 inches (250mm) |
| 10-inch Model (EDL30110) Max Opening | 33mm |
| Overall Package Dimensions | Length: 33 cm, Width: 12 cm, Height: 4 cm |
| Package Weight | 0.549 kg |
| Origin | Mainland China |
User Tips
- Optimal Grip: Always hold the wrench so that the force is applied to the fixed jaw, not the adjustable jaw. This prevents slippage and damage to the fastener.
- Leverage: For stubborn fasteners, ensure you have good leverage. If more force is needed, consider using a longer handle wrench or other appropriate tools.
- Regular Cleaning: A quick wipe-down after each use will significantly extend the life of your wrench and maintain its appearance.
- Avoid Over-tightening: While durable, avoid excessive force that could strip fasteners or damage the wrench.
Warranty and Support
For any questions, concerns, or support regarding your Deli Adjustable Wrench, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
Please note that product design changes may occur, and variations in appearance or minor features might be present. Refer to the actual product for the most accurate details.
