XIAOMI MIJIA Sonic Electric Toothbrush T700 User Manual

1. Introduction

The XIAOMI MIJIA Sonic Electric Toothbrush T700 is designed to provide an efficient and thorough oral cleaning experience. It features advanced technology including a magnetic levitation sonic motor, DuPont™ Staclean® Brush wire bristles, and smart functions accessible via the Mi Home/Xiaomi Home app. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your electric toothbrush.

Figure 1: XIAOMI MIJIA Sonic Electric Toothbrush T700

2. Safety Instructions

Please read these safety instructions carefully before using the product and retain them for future reference.

General Warnings

• When using the toothbrush for the first time, you may experience minor gum bleeds. This is normal as gums adjust to the efficient cleaning. Gum bleeds typically stop within one to two weeks. If bleeding persists, discontinue use and consult a dentist.
• Users undergoing orthodontics, dental repair, or dental implants should use this product under the guidance of their dentists.
• This toothbrush complies with safety standards for electromagnetic devices. If you have questions about using it with pacemakers or other implanted devices, consult a doctor or the device manufacturer.
• This toothbrush is designed solely for cleaning teeth, gums, and tongue. Do not use it for any other purposes. If you experience discomfort or pain, stop using the toothbrush and consult your dentist.
• Do not immerse the charging dock in water or any other liquid.
• Do not plug the charging dock into an outlet if there is liquid on the plug.
• This toothbrush contains a built-in rechargeable battery. Do not expose it to fire, charge, use, or store it in high-temperature environments.
• Do not hit or drop the toothbrush. Discontinue use if it has been damaged due to impact or dropping.
• Do not attempt to modify, disassemble, or repair the toothbrush yourself.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a person responsible for their safety.
• Children should not play with the appliance. Cleaning and user maintenance should not be performed by children without supervision.
• The built-in battery cannot be removed or replaced. Do not disassemble or modify the battery yourself.
• A minimum separation distance of 0 cm must be maintained between the user's body and the device to comply with RF exposure requirements in Europe.
• Only use the charger and original USB power supply unit provided with the product.
• Do not use the charger outdoors or near heated surfaces.
• Keep the product and battery away from fire and direct sunlight. Avoid exposing the appliance or battery to excessive temperatures.
• Do not open, modify, pierce, damage, or dismantle the product or battery to prevent heating or release of toxic/hazardous substances. Do not short-circuit, overcharge, or reverse charge the battery.
• If the battery is damaged or leaking, avoid contact with skin or eyes. If contact occurs, rinse immediately with water and seek medical care.
• Do not place the product and its battery in microwave ovens or on induction cookers.
• This appliance contains a non-replaceable battery. At the end of its life, the appliance must be disposed of properly.

Cautions

• Check the toothbrush for obvious damage before use. Do not use it if severely damaged.
• Before plugging into a power outlet, ensure the voltage matches the product's rated voltage.
• Do not use the charging dock outdoors in direct sunlight.
• Do not use the toothbrush while bathing or showering.
• Do not share a toothbrush head with others.
• Do not wrap the charging cable around the charging dock while it is plugged into an outlet.
• Do not place any metal objects on the charging dock while it is plugged into an outlet.

3. Product Overview

Familiarize yourself with the components of your XIAOMI MIJIA Sonic Electric Toothbrush T700.

Figure 2: Product Components Diagram

1. Shaft Protection Cover
2. Toothbrush Handle
3. On/Off Button
4. Mode/Power Button
5. Smart LED Screen
6. Charging Dock
7. Toothbrush Head
8. Toothbrush Head Cover
9. Power Adapter

4. Setup

Installing the Toothbrush Head

Ensure the toothbrush head is installed in the same direction as the front of the toothbrush handle. A slight gap (0.4-1.0mm) should remain between the toothbrush head and the handle. This gap is intentional, designed to prevent collision during high-frequency vibration and to generate more power from the motor.

Figure 3: Toothbrush Head Installation

5. Operating Instructions

Turning On/Off

• Turning On: Press the On/Off button. The toothbrush will default to Standard Mode upon first power-on.
• Turning Off: Press the On/Off button again.

Changing Mode/Power

• Changing Modes: When the toothbrush is on, press the Mode/Power button to cycle through modes.
• Stepless Power Adjustment: Press and hold the Mode/Power button to adjust the brushing power continuously from gentle to strong. The brushing timer restarts with each power change. Power adjustments are specific to the current mode and do not affect other modes.

Brushing Modes

• Standard Mode: Ideal for daily oral hygiene.
• Gentle Mode: Recommended for sensitive teeth.
• Custom Mode: A two-minute advanced mode by default. More features and personalized settings (brushing duration, splash prevention, beginner mode, sensitive mode, advanced mode, etc.) can be configured via the Mi Home/Xiaomi Home app.

Healthy Brushing Technique

• Position the toothbrush head at a 45° angle to the gum line. Gently move it along your teeth and gum line.
• The toothbrush will briefly pause every 30 seconds to remind you to change your brushing position.
• If there is no active pause during use, the toothbrush will automatically turn off when the brushing mode ends. Brushing duration can be customized via the Mi Home/Xiaomi Home app.

Screen Icons and Notifications

The Smart LED Screen displays various information:

• Power Indicator: The more power, the more indicators light up.
• Brushing Score: After each session, a score is displayed. A score over 95 shows "✓". If a session is less than one minute, "..." is displayed. The app does not record data for sessions under one minute; it is recommended to brush for at least one minute.
• Screen-on Notifications: The screen automatically lights up to display the current brushing mode when the toothbrush is picked up. If a nickname or anniversary date is set in the Mi Home/Xiaomi Home app, it will display these notifications on the set date.

6. Maintenance

Cleaning the Toothbrush Body

• Clean the toothbrush body with a dampened soft cloth at least once a week.
• If toothpaste gets on the body, immediately rinse the entire body under a gentle stream of room temperature water, then dry with a soft cloth.

Cleaning the Toothbrush Head

• After brushing, rinse the toothbrush head with running water.
• After rinsing, place the protective cover on the toothbrush head to keep it clean and hygienic.
• It is recommended to replace the toothbrush head every three months.

Figure 4: Cleaning the Toothbrush Head

7. Smart Functions

Overpressure Notification

The toothbrush features an overpressure protection system. If excessive pressure is applied during brushing, the overpressure notification indicator on the back of the handle will blink red quickly, and the toothbrush will vibrate alternately to alert the user.

Figure 5: Overpressure Notification Indicator

Connecting to Mi Home/Xiaomi Home App

This product works with the Mi Home/Xiaomi Home app, allowing you to control your device and access advanced features.

• Scan the QR code below to download and install the app. If the app is already installed, you will be directed to the connection setup page.
• Alternatively, search for "Mi Home/Xiaomi Home" in your app store.
• Open the Mi Home/Xiaomi Home app, tap "+" on the upper right, and follow the prompts to add your device.

Figure 6: Mi Home/Xiaomi Home App QR Code

Note: The app version may be updated. Please follow the instructions based on the current app version.

Restoring Factory Settings

To restore the toothbrush to factory settings, press and hold both the On/Off button and the Mode/Power button simultaneously for five seconds. The Smart LED screen will turn white until the buttons are released.

8. Charging

Regular Charging

Place the toothbrush on the charging dock to begin charging. The LED screen will indicate the battery level.

• The toothbrush charging dock is designed specifically for the T700 and is not compatible with other products.
• If the toothbrush cannot be turned on after the battery is depleted, it will take approximately six hours to fully charge. The actual charging time may vary based on the battery level when charging begins.
• If the toothbrush battery has been depleted for a long time and not charged, the charging icon may blink slowly when it is next charged. This is normal.

Figure 7: Wireless Charging

9. Troubleshooting

Refer to the table below for common issues and their solutions.

10. Specifications

Power Adapter Specifications

11. User Tips

• App Connection (Chinese Version): This product is a Chinese version. When connecting to the "MI HOME" APP, please change the country setting to "China". The language within the app can then be set according to your local country. If connection issues arise, try resetting the device's Wi-Fi.
• Certifications: The product is certified with CE (Commodity Quality Certification).
• Accessories: The product typically comes with two brush heads as accessories.

12. Warranty and Support

For detailed information regarding warranty, service, and support, please refer to the official documentation. A comprehensive e-manual is available online:

www.mi.com/global/service/userguide

You can also find the user manual in PDF format here: User manual (PDF)

13. Environmental Protection

When the toothbrush reaches the end of its service life, please remove, dispose of, or recycle the built-in battery in accordance with local laws and regulations of the country or region it is used in. If the battery cannot be removed, please take the toothbrush to an official designated recycling center.

Battery Removal Instructions

CAUTION: The toothbrush must be turned off and fully depleted before attempting battery removal. You can keep the toothbrush on until it stops working to ensure depletion.

1. Remove the decoration and the cover at the bottom of the toothbrush handle.
2. Remove the inner holder.
3. Cut off the cable connecting the battery and remove the battery.

Note: Do not replace the battery yourself. Forcibly removing the battery may damage the toothbrush's function. Exercise caution.

14. Regulatory Compliance Information

WEEE Disposal and Recycling Information

All products bearing this symbol are Waste Electrical and Electronic Equipment (WEEE as in directive 2012/19/EU), which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

EU Declaration of Conformity

Hereby, Wuxi Qinghe Xiaobei Technology Co., Ltd. declares that the radio equipment type MES604 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html

Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Wuxi Qinghe Xiaobei Technology Co., Ltd. (a Mi Ecosystem company)
Address: Room 1106, 11th Floor, NO.2 of Building 530, Binhu District, Wuxi, China
User Manual Version: V1.0

Importer: Beryko s.r.o.
Na Roudné 1162/76, 301 00 Plzeň
www.beryko.cz