konouyouko Wifi Smart Switch Power Monitor

Contents

KonouYouKo Tuya Smart Home WiFi Smart Switch Power Monitor

Model: Wifi Smart Switch Power Monitor

1. Introduction

The KonouYouKo Tuya Smart Home WiFi Smart Switch with Power Monitor is a compact and versatile device designed to integrate seamlessly into your smart home ecosystem. It enables remote control, voice control, and energy monitoring for your electrical appliances and lighting. This manual provides essential information for safe installation, operation, and maintenance of your smart switch.

Tuya Smart Home Wifi Smart Switch with Power Monitor, 2-Way Control, 16A

Figure 1: Tuya Smart Home Wifi Smart Switch with Power Monitor

2. Safety & Warnings

  • WARNING: Keep out of reach of children. In case of ingestion, seek medical attention immediately.
  • Important Safety Information: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.
  • Do not use this product for purposes other than its intended use.

3. Product Features

  • Dual Mode Connectivity: Supports both WiFi and Bluetooth for faster and more reliable network connection.
  • Miniature Design: Compact size (42*42*20mm) allows for easy installation directly into standard switch bottom boxes.
  • Two-Way Control: Compatible with traditional 2-way control switches, allowing manual control even after smart switch installation.
  • Voice Control: Fully compatible with Amazon Alexa, Google Home, and Tmall Genie for hands-free operation.
  • Power Monitoring: Track and monitor electricity consumption (kWh) of connected appliances via the app.
  • Timing & Countdown Functions: Schedule devices to turn on/off at specific times or after a set countdown.
  • Group Control & Family Sharing: Control multiple switches as a group and share device permissions with family members.
  • Power-Off Memory: Retains the last state (ON/OFF) or a predefined state after a power outage.
  • High Load Capacity: Supports a maximum current of 16A, suitable for most home equipment.
  • Flame Retardant Material: Constructed from PC V0 flame retardant material for enhanced safety.
  • Offline Notification: Receive reminders on your phone if the switch goes offline.

4. Setup & Installation

4.1 Before Installation

  1. Ensure the main power supply to the circuit is turned off at the breaker before attempting any wiring.
  2. Verify that the smart switch is compatible with your existing wiring and switch type. The device is compatible with rocker switches but NOT with momentary rocker light switches or touch wall switches.
External switch connection compatibility, showing various plug types (EU, US, FR, UK) and rocker switches. Incompatible with momentary rocker and touch wall switches.

Figure 2: Compatible and Incompatible Switch Types

4.2 Wiring Instructions

The smart switch supports various wiring configurations. Always ensure proper connection of Live (L) and Neutral (N) lines.

Three wiring methods for rocker switches: direct light connection, light and rocker switch connection, light and rocker switch connection (different configuration).

Figure 3: Three Wiring Methods for Rocker Switches

For two-way control, connect the smart switch as shown in the diagram below:

Detailed wiring diagram for two-way control with a lamp and a 2-way switch.

Figure 4: Two-Way Control Wiring Diagram

4.3 Physical Installation

  1. After wiring, carefully place the mini smart switch into the switch bottom box. Its compact design allows it to fit behind most standard wall switches.
  2. Secure the wall switch cover.
  3. Turn on the main power supply at the breaker.
Mini Smart Switch installation behind a wall switch, showing compatibility with various box sizes (70x76mm, 80x80mm, 66x102mm).

Figure 5: Mini Smart Switch Installation

Easy installation, showing the mini switch placed behind a wall switch.

Figure 6: Easy Installation Behind Switch

4.4 App Pairing

The smart switch uses the Tuya Smart or Smart Life app for control. Follow these steps to pair your device:

  1. Download the 'Tuya Smart' or 'Smart Life' app from your app store (available on Google Play and Apple App Store).
  2. Register or log in to your account.
  3. Open WiFi and Bluetooth on your phone. A window will automatically pop up in the app for quick adding.
  4. Alternatively, press and hold the manual button on the switch for 5 seconds, or cycle the power six times (ON/OFF six times) until the LED light flashes or the buzzer makes a 'DI-DI-DI' sound, indicating pairing mode.
  5. In the app, select 'Add Device' (usually found under 'Electrician' -> 'Smart Module' or 'Switch (Wi-Fi)').
  6. Confirm the device is in pairing mode and follow the on-screen prompts to connect to your 2.4GHz Wi-Fi network.
  7. Once successfully added, you can rename the device and start controlling it.
Steps to add device to 'Smart Life' app: Login/Register, Add Device (Smart Module), Select Wi-Fi, Add device successfully.

Figure 7: Adding Device to Smart Life App

5. Operating Instructions

5.1 App Control

Once paired, you can control your smart switch via the Tuya Smart/Smart Life app:

  • On/Off: Tap the switch icon in the app to turn the connected device on or off.
  • Timing Function: Set schedules for automatic on/off operations. For example, turn on lights at 8:00 AM and off at 10:00 PM.
  • Countdown Function: Set a countdown timer for the device to turn off after a specified duration.
  • Power Monitor: View real-time and historical electricity consumption data (Current, Power, Voltage, Total kWh) directly in the app.
  • Power-Off Memory: Configure the switch's behavior after a power outage (OFF, ON, or Remember Last Status) in the app settings.
  • Offline Notification: Enable this feature in the app to receive alerts if your switch loses connection.
Power Monitor feature showing electricity usage (kWh) on the app.

Figure 8: Power Monitoring in App

Power Monitor feature displaying daily and monthly electricity usage (kWh) on the app.

Figure 9: Daily and Monthly Electricity Usage

Timing and Countdown functions shown on the app.

Figure 10: Timing and Countdown Functions

Offline Notification feature, showing a phone receiving a reminder when the switch is offline.

Figure 11: Offline Notification

5.2 Voice Control

Integrate your smart switch with voice assistants like Amazon Alexa, Google Home, or Tmall Genie for convenient voice commands.

Voice remote control with Alexa, Google Home, and Tmall Genie.

Figure 12: Voice Control Setup

Smart speaker voice control, showing Alexa and Google Assistant devices.

Figure 13: Smart Speaker Voice Control

5.3 Two-Way Control

The smart switch supports two-way control, allowing you to operate the connected light or appliance from two different physical switch locations, in addition to app and voice control.

Wiring diagram for two-way control, connecting two parallel switches or a series switch.

Figure 14: Two-Way Control Functionality

5.4 Group Control & Family Sharing

Organize multiple smart switches into groups for simultaneous control. The main account holder can share control permissions with other family members, enabling everyone to manage smart devices.

Group-control function, showing multiple switches controlled together in a smart home layout.

Figure 15: Group Control in a Smart Home

Group control for individual or multiple devices.

Figure 16: Individual or Group Control

6. Maintenance

  • Keep the device clean and dry. Avoid exposure to water or excessive moisture.
  • Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.
  • Store the device in a dry place when not in use for extended periods.

7. Troubleshooting

7.1 Pairing Issues

If you experience difficulty pairing the device, try the following methods to enter pairing mode:

  1. Long press the manual button on the switch for 5 seconds.
  2. Open and close the connected rocker switch six times (if connected).
  3. Turn the power to the switch ON and OFF six times.

The device is in pairing mode when the buzzer makes a 'DI-DI-DI' sound or the LED light flashes.

Comparison of connection methods: 'Ours' (Wifi + Bluetooth, quick connection) vs 'Others' (complicated pairing).

Figure 17: Quick Connection vs. Complicated Pairing

7.2 General Issues

  • Device unresponsive: Check power supply and Wi-Fi connection. Ensure the device is within Wi-Fi range.
  • Voice control not working: Verify that the smart switch is correctly linked to your voice assistant (Alexa, Google Home) account in their respective apps.
  • Inaccurate power monitoring: Ensure the device is correctly wired and the load does not exceed the maximum current of 16A.

8. Specifications

ParameterValue
ColorWhite
Input VoltageAC 100-240V 50/60Hz
OutputAC 100-240V 50/60Hz
Max. Load Current16A
WiFi StandardIEEE 802.11 b/g/n 2.4GHz
MaterialPC V0 (Flame Retardant)
Size42*42*20mm
Start MethodTouch/Mobile APP/Voice Speaker
Certified ProductCE, FCC, RoHS
Communication MethodWi-fi
High-concerned chemicalNone
Product parameter table: Color, Output, Input, WiFi, Material, Start method, Certified product, Maximum current.

Figure 18: Product Parameters

8.1 Product Type Comparison

FeatureType AType B
Connection WayWiFi+BLEWiFi
Power MonitorYesNo
InchingYesNo
Switch TypeYesNo
Current16A
Multi-link2-Way
Working Frequency2.4GHz Wifi 802.11 b/g/n
TimerTiming / Countdown
Function 1Relay Status
Function 2Offline Notification
Function 3App Remote Control
Function 4Share Device / Group Control
Product comparison table for Type A (WiFi+BLE, Power Monitor, Inching, Switch Type) and Type B (WiFi only).

Figure 19: Type A vs. Type B Features

9. User Tips

  • For optimal performance, ensure your Wi-Fi network is 2.4GHz.
  • Utilize the power monitoring feature to track energy consumption and identify energy-saving opportunities.
  • Take advantage of the timing and countdown functions to automate daily routines, such as turning on coffee makers or lights.
  • If you have multiple smart switches, use the group control feature to manage them efficiently.

10. Warranty & Support

For detailed product information, troubleshooting, and support, please refer to the official user manual PDF:

View User Manual (PDF)

Manufacturer Information:

  • Company Name: ShenZhen Koston Technology Co., Ltd
  • Address: 2nd Floor, Qingqishu Industrial Park, Longhua, Shenzhen
  • Email: szkoston@foxmail.com
  • Phone: +86-075582797499

EU Authorized Representative:

  • Company Name: eVatmaster Consulting GmbH
  • Full Address: Raiffeisen Street2 B11, 63110 Rodgau, Hessen
  • Email: contact@evatmaster.com
  • Phone: +49-61062699873

11. Product Video

Video 1: Product demonstration showing installation, app control, two-way control, voice control, power monitoring, countdown, and power-off memory.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.