1. Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your WINXU E-bike Brushless Drive Controller and G51 LCD Display conversion kit. Please read this manual thoroughly before use to ensure proper function and safety.
1.1 Product Information
- Product Name: Brushless Motor Controller for E-Bike
- Model: 250W / 350W
- Batch Number: 260215P-01
1.2 Manufacturer Information
- Manufacturer: ShenZhen Winxu Technology Co,.Ltd
- Address: No.118, Building B, Yongxing Office Building, No. 68, Tianyun Road, Songgang Street, Baoan District, Shenzhen, China
- E-mail: Winxutech@163.com
- Tel: +86-15814065441
1.3 Package Contents
The package includes the following components:
- 1 x WINXU Brushless Drive Controller
- 1 x G51 LCD Display
For a visual overview of the product, refer to the image below:

2. Safety & Warnings
Read all instructions before use to ensure safety and prevent damage.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Warning: Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
- Always disconnect the battery power supply before installing or performing any maintenance on the controller or display. Working with power on may damage the equipment and pose a safety risk.
- Ensure all connections are secure and correctly wired to prevent short circuits, overheating, and damage to the controller or other components.
3. Specifications
| Feature | Specification |
|---|---|
| Type | Controller |
| Brand Name | WINXU / WinXu Tech |
| Origin | Mainland China |
| Input Voltage | 24V, 36V, 48V |
| Power | 250W - 350W |
| Motor Type | Brushless motor |
| Current | 13A / 15A |
| LCD Display Model | G51 / S866 |
| Material | Plastic + LCD + Metal |
| Low-voltage Protection (24V-36V) | 19V/30V |
| Low-voltage Protection (36V-48V) | 30V-41V |
| Waterproof Rating | Rainproof |
| Controller Size | Approx. 8.8 x 5.2 x 3 cm (3.46 x 2.04 x 1.18 inch) |
| Display Size | Approx. 8 x 5 cm (3.15 x 1.97 inch) |
| Total Weight | Approx. 332g |
| Package Dimensions | 18 cm (L) x 10 cm (W) x 12 cm (H) |
| Package Weight | 0.45 kg |


4. Installation Instructions
4.1 Pre-use Preparation
Before installing the controller, please disconnect the battery power supply. Do not work with the power on, as it may easily damage the equipment and pose a safety risk.
4.2 Product Wiring Diagram
Before starting the installation, please be sure to carefully read the wiring diagram below and fully understand the functions of all connectors before proceeding.

4.3 Connector Function Introduction and Installation Steps
- Motor Phase Wire: Connect the 3-phase thick wires (yellow, green, and blue) of your motor according to the color code. Ensure a secure connection, as these handle a large driving current.
- Motor Hall Sensor: This controller uses a 6-wire Hall sensor. Connect red, yellow, and blue for Hall signal wires; red and black for working voltage; and white for the motor speed signal. If your motor has a 5-wire Hall sensor, ignore the white speed signal cable; the controller will automatically obtain the motor speed signal from the Hall signal cable.
- LCD Display (G51): This is a 5-pin connector using a UART protocol. Connect red and black for operating voltage, blue for controller power control, green for RX, and yellow for TX.
- Power Lock: This connector is for a key lock. If your original bicycle has a key lock, connect the key lock switch here. If not, you can ignore it.
- Throttle: This connector is for a Hall throttle (thumb or twist type), which receives a signal voltage of 1.1-4.2V. Connect red and black for operating voltage, and white for the Hall signal. Ensure correct wiring.
- PAS Sensor: This controller uses a magnetic pulse type PAS sensor. Connect red and black for power voltage, and blue for the pulse signal cable.
- EABS (Electronic Automatic Braking System): If your scooter uses an EABS type brake, connect your EABS brake to this connector. EABS brakes are Hall brake systems. Do not use this connector if your brakes are low-level brakes.
- Low-level Brake: This is a power-off braking system that cuts off motor power when applied. Connect the black cable to the negative wire and the white cable to the brake signal. If your brake is a low-level type with 2 cables, connect it correctly.
- Light Power: This connector outputs battery voltage for devices like headlights, brake lights, horns, and USB chargers. Yellow is the positive terminal, and black is the negative terminal.
- Battery: This is the device's power supply. Connect the positive and negative terminals correctly. Connect the battery in the last step, and carefully check for short circuits in other components before connecting. Double-check for reverse polarity.
- Automatic Detection (Self-Learning Cable): This connector is used for motor matching. After installation, turn on the device, lift the motor hub, and plug in this connector. The motor will start driving. If the motor drives in the opposite direction, disconnect and reconnect the connector to change direction. Once the motor drives in the correct direction without vibration, disconnect the self-learning cable.
5. Operating Instructions
5.1 G51 LCD Display Functions
The G51 LCD display provides clear state and data information. Its backlight ensures visibility in dim environments, and buttons allow for quick operation. Key features include:
- Power-on password setting.
- Control of lights, cruise function, and boost mode.
- Vehicle speed divided into 3, 5, or 9 optional gear positions.
- Option to select gear division with the handle.

5.2 LCD Error Code Explanation
The display may show error codes to indicate issues:
| Code | Description |
|---|---|
| E02 | Brake fault |
| E03 | PAS sensor fault |
| E04 | 6KM/H cruise mode |
| E05 | Real-time cruise |
| E06 | Battery undervoltage |
| E07 | Motor failure |
| E08 | Throttle fault |
| E09 | Controller failure |
| E10 | Communication signal reception failure |
| E11 | Communication signal transmission fault |
| E12 | BMS communication fault |
| E13 | Headlight fault |
6. Maintenance & Storage
- Cleaning: Turn off the device before cleaning. Use a soft, lint-free cloth. Do not use harsh chemicals or abrasive materials.
- Storage: Store in a dry place at room temperature (15°C - 35°C).
- Long-term Storage: If not used for a long time, charge the device to 50% every 3 months to maintain battery health.
7. Troubleshooting
7.1 E07 Error Code (Motor Failure)
If the display shows an E07 error code, it indicates that the device has not completed motor matching and parameter detection, or there is a motor failure or motor hall sensor fault. To resolve this:
- Use the self-learning cable to complete the motor matching operation after installation (refer to section 4.3, step 11).
- Once motor matching is complete, use the throttle and high-speed gear to drive the motor at high speed. The controller will detect motor parameters and status.
- If no fault is detected during high-speed driving, the controller will automatically remove the E07 error code display.
- If E07 still displays, it means the driving speed is insufficient, or there is a fault with the motor or motor hall sensor. Please check the motor and its connections.
7.2 General Troubleshooting
- No Power/Display Not Turning On: Check battery connection and ensure the power lock (if used) is engaged. Verify battery voltage is within the specified range.
- Motor Not Responding: Check all wiring connections, especially the motor phase wires, Hall sensor, and throttle. Ensure the self-learning process has been completed successfully.
- Incorrect Speed/Assist: Verify PAS sensor connection and functionality. Ensure the LCD display settings for gear positions are correctly configured.
- Other Error Codes: Refer to the 'LCD Error Code Explanation' table in section 5.2 and inspect the corresponding component and its wiring.
8. User Tips
- Complete Kit Check: Before starting installation, ensure you have both the controller and the G51 display, along with all necessary wiring. Many users find the complete kit essential for a smooth conversion.
- Wiring Clarity: The provided wiring diagram is comprehensive. Take your time to match each wire color and function carefully. Double-checking connections can prevent common issues.
- Self-Learning is Key: Do not skip the automatic detection (self-learning) step. It is crucial for the controller to properly recognize your motor and function correctly.
9. Warranty & Support
For warranty information and technical support, please contact the seller or manufacturer directly using the contact details provided in Section 1.2 of this manual. Please retain your proof of purchase for any warranty claims.
10. Disposal & Recycling
This symbol indicates that this product should not be treated as household waste. According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health.
For more information on proper disposal, please consult your local waste management authorities.

User manual (PDF) available for download: View PDF