1. Introduction
The Wurui 918 is a versatile 4G Push-to-Talk Over Cellular (POC) and Ultra High Frequency (UHF) two-way radio, designed for global communication. It combines traditional walkie-talkie functionality with modern cellular network capabilities, allowing for long-range communication and telephone calls. This manual provides essential information for setting up, operating, and maintaining your device.
Important Note: To utilize the POC function, you must have two or more Wurui 918 units.
2. Product Overview
Familiarize yourself with the key components and controls of your Wurui 918 walkie talkie.

- Antenna: For signal transmission and reception.
- Vol/Power Knob: Rotate to turn the device on/off and adjust volume.
- SOS Button: Press for emergency alerts.
- PTT (POC) Button: Push-to-Talk for POC network communication.
- PTT (UHF) Button: Push-to-Talk for UHF analog communication. Short press for POC/analog mode, long press for single/group call.
- K-style/MicroUSB Port: For accessories like headsets.
- Speaker: Audio output.
- Screen: Displays status, menu, and call information.
- Menu Button: Access device settings and options.
- Back Button: Navigate back in menus.
- UP/Down Buttons: Navigate through menus and adjust settings.
- Type-C Port: For charging and data connection.
3. Setup
3.1 Initial Charging
Before first use, fully charge the device. The Wurui 918 supports both Type-C direct charging and charging via a desktop cradle.

- Type-C Charging: Connect a standard Type-C USB cable to the port on the side/bottom of the device and to a compatible USB power adapter.
- Desktop Cradle Charging: Place the walkie talkie into the charging cradle. Ensure the charging contacts align. Connect the cradle to a power source.
3.2 SIM Card Installation (for 4G/POC functionality)
The Wurui 918 requires a 4G SIM card for Push-to-Talk Over Cellular (POC) and telephone call features. Refer to your device's specific instructions for SIM card slot location and insertion. Ensure the device is powered off before inserting or removing the SIM card.
3.3 Antenna Attachment
Screw the provided antenna firmly into the antenna connector on the top of the device. Do not overtighten.
4. Operation
4.1 Power On/Off and Volume
- Power On: Rotate the Vol/Power knob clockwise until you hear a click and the screen illuminates.
- Power Off: Rotate the Vol/Power knob counter-clockwise until you hear a click and the screen turns off.
- Volume Adjustment: Rotate the Vol/Power knob while the device is on to adjust the listening volume.
4.2 Making Calls
The Wurui 918 supports various call types:

- POC Calls (Push-to-Talk Over Cellular): Use the dedicated PTT (POC) button for network-based communication. This allows for global communication over 4G networks.
- UHF Analog Calls: Use the dedicated PTT (UHF) button for traditional UHF radio communication within range.
- Single Call: A private conversation with one specific contact.
- Group Call: Communicate with multiple users simultaneously within a predefined group.
- Telephone Call: Utilize the 4G network and SIM card to make standard telephone calls to up to 1000 contacts.
4.3 SOS Function
In an emergency, press the SOS button to send an alert. The device will transmit a distress signal to pre-programmed contacts or groups.

5. Key Features
The Wurui 918 offers a range of advanced features for diverse communication needs.

- 4G LTE Connectivity: Enables wide-area communication and telephone calls. Supports bands B1/B3/B5/B7 and B34/B38/B39/B40/B41. For specific country band compatibility, refer to www.frequencycheck.com/countries.
- POC (Push-to-Talk Over Cellular): Global communication using cellular data networks.
- UHF Analog: Traditional short-range radio communication (400-470MHz).
- Repeater Functionality: The device can act as a repeater, bridging POC and analog signals to extend communication range.
- Telephone Call Function: Make and receive standard phone calls with up to 1000 contacts.
- IP55 Water-Resistant: Provides protection against dust and low-pressure water jets, suitable for outdoor use.
- Long Standby Time: Up to 7 days standby with a 9800mAh battery.
- Programming Software: Customize channels and settings using the HX918 Programming Software.

6. Specifications
Technical specifications for the Wurui 918 walkie talkie:
| Feature | Specification |
|---|---|
| Model Number | 918 |
| Brand Name | Wurui |
| Output Power (W) | 5W-10W |
| Battery Capacity (mAh) | 9800 |
| Waterproof / Water-Resistant | IP55 |
| Material | Plastic |
| Storage Channel | 199 |
| Frequency Range | 400-470MHz (UHF) |
| Dimensions | 123*55*40mm |
| Walkie Talkie Type | Repeater |
| Display | Yes |
| Maximum Range | >50km (POC dependent on network) |
| Standby Time | 7 days |
| Charging Method | Type-C or Desktop Cradle |
| Origin | Mainland China |

7. Maintenance
7.1 General Care
- Keep the device dry. Do not expose it to extreme temperatures.
- Clean the device with a soft, damp cloth. Do not use harsh chemicals or solvents.
- Ensure all port covers are securely closed to maintain IP55 water resistance.
7.2 Battery Care
- Charge the battery fully before initial use.
- Avoid completely draining the battery frequently to prolong its lifespan.
- If storing the device for an extended period, charge the battery to about 50% and store in a cool, dry place.

8. Troubleshooting
- No Power: Ensure the battery is charged and properly installed. Rotate the Vol/Power knob to turn on.
- Cannot Make POC Calls: Verify that a 4G SIM card is installed, has an active data plan, and that you have at least two Wurui 918 units. Check network signal strength.
- Cannot Make UHF Calls: Ensure you are within range of other UHF radios and that both devices are on the same frequency and channel. Check antenna connection.
- Poor Audio Quality: Check volume settings. Ensure the microphone and speaker are not obstructed. Move to an area with better signal reception.
- Device Not Charging: Check the Type-C cable or charging cradle connection. Ensure the power adapter is working.
9. User Tips
- POC Functionality: Remember that the Push-to-Talk Over Cellular (POC) feature requires at least two Wurui 918 units to function.
- Repeater Mode: The device can be configured to act as a repeater, allowing it to receive signals on one mode (e.g., UHF) and retransmit them on another (e.g., POC), effectively extending your communication range. This can be particularly useful for bridging different communication networks.
- Global Coverage: Leverage the 4G connectivity for truly global communication, provided there is cellular network coverage.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the official Wurui website. Keep your purchase receipt as proof of purchase.