1. Introduction
This manual provides instructions for the safe and effective use of your TELESIN Carbon Fiber Extendable Selfie Stick Monopod. This versatile accessory is designed to enhance your photography and videography experience by offering extended reach and stable support for action cameras, panoramic cameras, and smartphones.

2. Safety Information
- Do not use the selfie stick during thunderstorms or in adverse weather conditions.
- Avoid contact between the selfie stick and any power supply or electrical outlets.
- Do not mount objects exceeding the maximum recommended weight (0.3KG). Overloading can cause damage to the stick or attached devices.
- Ensure the locking mechanism is fully engaged when extending the stick to prevent accidental collapse.
3. Package Contents
Please verify that all items are present in your package:
- Packaging Box x1
- TELESIN Carbon Fiber Selfie Stick (1.2M or 3M variant) x1
- User Manual x1
- Wrist Rope x1

4. Setup Guide
4.1 Attaching Your Device
The selfie stick is equipped with a standard sports camera interface, including a three-jaw adapter and a removable 1/4-inch bolt adapter. This allows compatibility with a wide range of devices:
- Action Cameras: Directly attach cameras like GoPro, DJI Action, or Insta360 using the three-jaw adapter. Some cameras may require their original frame, waterproof case, or specific adapters.
- Smartphones: To attach a smartphone, you will need a separate phone clip and adapter (not included with all variants). Secure your phone firmly in the clip before attaching it to the selfie stick.

4.2 Attaching a Tripod Base (Optional)
The bottom of the selfie stick features a 1/4-inch threaded port, allowing you to attach a compatible tripod base for stationary shots. Please note that a tripod base is not included as standard and must be purchased separately.

5. Operating Instructions
5.1 Extending and Retracting the Selfie Stick
The selfie stick features a rotating locking design for easy length adjustment. It can be freely locked to any length between its minimum (32cm for 1.2M variant, 44cm for 3M variant) and maximum (120cm for 1.2M variant, 300cm for 3M variant) extension.
- To Extend: Gently pull out the desired section of the stick. Then, rotate the section clockwise to lock it securely in place.
- To Retract: Rotate the section counter-clockwise to unlock it. Push the section back into the main body of the stick.


5.2 Handle Grip
The handle is wrapped in food-grade silicone with a non-slip texture, providing a comfortable and secure grip during use.

5.3 Usage Scenarios
The extendable design allows for diverse shooting perspectives, from wide group shots to drone-like panoramic views and underwater photography.



6. Specifications
| Feature | Detail |
|---|---|
| Product Name | TELESIN Carbon Fiber Selfie Stick Monopod |
| Model Number | GP-MNP-002 |
| Material | 24T Carbon Cloth, Aluminum Alloy, Silicone |
| Folded Length (1.2M variant) | 32 cm |
| Max Extended Length (1.2M variant) | 120 cm |
| Weight (1.2M variant) | 146 g |
| Folded Length (3M variant) | 44 cm |
| Max Extended Length (3M variant) | 300 cm |
| Weight (3M variant) | 374 g |
| Max Mount Load | 0.3 KG |
| Configured for | Action Video Cameras, Smartphones, Cameras |
| Communication | None (No Bluetooth or wired control) |
| Support Remote Control | No |

7. Maintenance
- After use, especially after immersion in seawater, rinse the selfie stick thoroughly with fresh water and dry it completely to prevent corrosion.
- When storing, rotate the sections to retract them smoothly. Avoid forcing or hitting the bar directly to prevent cracking.
- Clean the carbon fiber and silicone parts with a soft, damp cloth. Do not use harsh chemicals or abrasive materials.

8. Troubleshooting
8.1 Selfie Stick Not Extending/Retracting Smoothly
Ensure that the rotating locking mechanism is fully disengaged (rotated counter-clockwise) before attempting to extend or retract the sections. If there is resistance, check for any debris or foreign objects in the joints. Clean the sections if necessary.
8.2 Device Not Securely Attached
Verify that your camera or smartphone adapter is correctly mounted and tightened onto the selfie stick's three-jaw or 1/4-inch screw mount. For smartphones, ensure the phone clip is securely holding the device.
8.3 Selfie Stick Bending/Unstable
Ensure all sections are fully extended and locked by rotating them clockwise. Avoid mounting devices that exceed the maximum load capacity of 0.3 KG. The carbon fiber construction is designed for stability, but excessive weight or improper locking can lead to instability.

9. User Tips
- This selfie stick does not feature Bluetooth connectivity. Any remote control functionality must come from your attached camera or a separate remote.
- The selfie stick is compatible with a wide range of smartphones, including iPhone 13, when used with an appropriate phone clip and adapter (sold separately for some variants).
- For optimal stability and to prevent bending, always ensure each section is fully extended and securely locked before use.
- When traveling, the stick folds down to a compact size (32cm for 1.2M, 44cm for 3M), making it easy to fit into a backpack.

10. Warranty and Support
TELESIN products are manufactured to high-quality standards. This product comes with a 1-year warranty against manufacturing defects. For warranty claims, technical support, or any inquiries regarding your selfie stick, please contact TELESIN customer service through your purchase platform or the official TELESIN website.