FDIK Penguin Heater

Contents

FDIK 8KW Diesel Air Heater

Model: Penguin Heater

Instruction Manual

1. Introduction

Thank you for choosing the FDIK 8KW Diesel Air Heater. This all-in-one heater is designed to provide efficient and reliable warmth in various environments, including cars, RVs, boats, trucks, cabins, and camping setups. It features versatile power options (12V, 24V, 220V), Bluetooth connectivity, and an intuitive LCD switch for easy control.

The heater operates by drawing in cold air, passing it through a heated aluminum body where diesel combustion generates heat, and then blowing out warm air. This process ensures rapid and consistent heating to keep you comfortable in cold conditions.

FDIK 8KW Diesel Air Heater main unit

Figure 1: FDIK 8KW Diesel Air Heater Main Unit

2. Safety Information

Please read and understand all safety warnings and instructions before installing or operating this heater. Failure to follow these instructions may result in fire, explosion, electric shock, or serious injury.

  • Ensure adequate ventilation when operating the heater to prevent carbon monoxide buildup.
  • Do not operate the heater in enclosed spaces without proper exhaust ventilation.
  • Keep flammable materials at a safe distance from the heater.
  • Ensure all electrical connections are secure and correctly wired according to the specified voltage (12V, 24V, or 220V).
  • Do not touch hot surfaces of the heater during operation or immediately after shutdown.
  • Keep children and pets away from the heater.
  • Use only diesel fuel as specified. Do not use gasoline or other volatile fuels.
  • Regularly inspect the heater for any damage or signs of wear.
  • In case of malfunction, turn off the heater immediately and consult the troubleshooting section or contact customer support.

3. Package Contents

Verify that all items listed below are included in your package:

  • FDIK Diesel Air Heater Unit
  • LCD Switch Control Panel
  • Remote Control
  • Air Intake Pipe
  • Exhaust Pipe
  • Fuel Line/Hose
  • Wiring Harness
  • Mounting Clamps and Fasteners
  • 220V Adapter (Optional accessory, may be included depending on package)
Image showing all components included in the FDIK Air Heater package

Figure 2: Package Contents

4. Product Overview

4.1. External Features

  • Metal Case: Durable and sturdy construction with strong impact resistance.
  • Portable Design: Equipped with a handle for easy movement and transport.
  • Power Interface: Clearly marked red (positive) and black (negative) terminals for power connection.
Image highlighting the metal case, portable handle, and power interface of the heater

Figure 3: External Features

4.2. LCD Control Panel

The LCD control panel provides comprehensive control and monitoring of the heater's functions:

  • Function Button: Used to cycle through different settings and modes.
  • Knob Switch: For adjusting values such as temperature and power level.
  • OK Button: To confirm selections.
  • Bluetooth: Allows control via a dedicated Android application.
  • Run Time Display: Shows the duration of the switch's power on (resets every 100 hours).
  • Temperature Adjust: Range from 10°C to 40°C.
  • Power Adjust: Levels from H1 to H6.
Detailed view of the LCD control panel with labels for function button, knob switch, and OK button, along with indicators for Bluetooth, run time, temperature, and power adjustment.

Figure 4: LCD Control Panel

4.3. Internal Components & Heating Principle

The heater's internal design ensures efficient and safe operation:

  • Heating Zone: Where the primary heat exchange occurs.
  • Overheat Protection Device: Ensures safety by preventing excessive temperatures.
  • Flame Retardant Impeller: For safe air circulation.
  • Control Box: Houses the electronic controls.
  • Air Fan: Draws in cold air and expels warm air.
  • Glow Plug: Initiates combustion of diesel fuel.
  • Combustion Chamber: Where diesel fuel is burned.
  • Motor Assembly: Drives the air fan and fuel pump.
  • Fuel Tank: Integrated 5.0L fuel tank.
Exploded view diagram of the FDIK Air Heater showing internal components like heating zone, overheat protection, impeller, control box, air fan, glow plug, combustion chamber, and motor assembly.

Figure 5: Internal Components Diagram

Diagram illustrating the heating principle: cold air enters, passes through a heated aluminum body, and hot air is blown out. Shows the 5.0L fuel tank and fuel consumption rate.

Figure 6: Heating Principle Demonstration

5. Specifications

Feature Specification
Thermal Power 8KW (Adjustable 1000-5000W)
Voltage 12V, 24V, 220V
Operating Temperature -40°C to 40°C
Air Volume 60-180 m³/h
Fuel Type Diesel
Fuel Tank Capacity 5.0 L
Fuel Consumption 0.15-0.55 L/H
Switch Type LCD Switch
Item Length 37 cm
Item Width 15.5 cm
Item Height 36.5 cm
Item Diameter 7.5 cm
Item Weight 9.2 kg
Certifications CE, RoHS
Origin Mainland China
Image showing the dimensions and key specifications of the FDIK Air Heater in a table format.

Figure 7: Dimensions and Key Specifications

6. Setup

Proper installation is crucial for the safe and efficient operation of your FDIK Air Heater. Always refer to local regulations and safety standards.

6.1. Mounting Location

  • Choose a stable, flat, and non-flammable surface for mounting.
  • Ensure sufficient clearance around the heater for air intake and exhaust.
  • The heater is suitable for various applications including houses, cabins, camping, RVs, boats, and trucks.
Image showing wide application scenarios for the heater, including house, cabin, camping, RV, boat, and truck, with a snowy jeep in the foreground.

Figure 8: Wide Application

6.2. Power Connection

  • Connect the wiring harness to the heater's power interface, ensuring red is connected to positive (+) and black to negative (-).
  • For 12V or 24V DC operation, connect directly to a compatible power source (e.g., vehicle battery).
  • For 220V AC operation, use the provided or an appropriate 220V adapter (if included or purchased separately).
  • Ensure all connections are tight and secure to prevent arcing or power loss.

6.3. Fuel Connection

  • Fill the integrated 5.0L fuel tank with clean diesel fuel.
  • Ensure the fuel cap is securely tightened after filling.
  • Connect the fuel line securely to the heater's fuel inlet.

6.4. Air Intake and Exhaust

  • Connect the air intake pipe to the designated inlet. Ensure it draws in clean, unobstructed air.
  • Connect the exhaust pipe to the designated outlet. Route the exhaust pipe safely away from the heated area and any flammable materials. Ensure exhaust gases are vented outdoors and away from any air intakes.
  • Secure both pipes with the provided clamps.

7. Operating Instructions

7.1. Powering On/Off

  • To power on, press and hold the OK button on the LCD control panel or the ON button on the remote control.
  • To power off, press and hold the OK button on the LCD control panel or the OFF button on the remote control. The heater will go through a cool-down cycle before fully shutting down.

7.2. Using the LCD Control Panel

  • Adjusting Temperature: Press the Function button until the temperature setting is highlighted. Use the Knob switch to adjust the desired temperature between 10°C and 40°C. Press OK to confirm. The heater features thermostatic control, automatically adjusting its operation to maintain the set temperature.
  • Adjusting Power: Press the Function button until the power setting is highlighted. Use the Knob switch to select a power level from H1 (lowest) to H6 (highest). Press OK to confirm.
  • Monitoring Run Time: The LCD displays the cumulative run time, which resets every 100 hours.

7.3. Remote Control Operation

The included remote control allows convenient operation from a distance.

  • ON/OFF: Use the ON and OFF buttons to power the heater on or off.
  • Temperature/Power Adjustment: Use the '+' and '-' buttons to adjust temperature or power settings, depending on the remote's mode.
  • The maximum remote control distance is approximately 30 meters under barrier-free conditions.
Image showing the remote control being used to pre-heat a car in a snowy environment, indicating a 30-meter control range.

Figure 9: Remote Control Functionality

7.4. Bluetooth Control (Android)

For Android users, the heater can be controlled via a dedicated mobile application. Search for the FDIK heater app on the Google Play Store. Connect the heater through the app via Bluetooth. Note that control is limited by Bluetooth connection range.

8. Maintenance

Regular maintenance ensures the longevity and optimal performance of your heater.

  • Cleaning: Periodically clean the air inlet and outlet grilles to ensure unobstructed airflow. Use a soft, dry cloth.
  • Fuel Filter: Check and clean or replace the fuel filter as needed to prevent clogging and ensure clean fuel delivery.
  • Connections: Regularly inspect all electrical and fuel line connections for tightness and signs of wear or damage.
  • Exhaust System: Ensure the exhaust pipe is free from blockages and corrosion.
  • General Inspection: Visually inspect the heater for any physical damage, loose parts, or unusual noises during operation.

9. Troubleshooting

If you encounter issues with your heater, refer to the following common problems and solutions:

Problem Possible Cause Solution
Heater does not start No power, low fuel, faulty glow plug, control panel issue. Check power connections and fuse. Ensure sufficient fuel. Inspect glow plug (refer to Figure 5). Check LCD panel for error codes.
Low heat output Low power setting, restricted airflow, poor fuel quality. Increase power setting (H1-H6). Clear air inlets/outlets. Use clean, appropriate diesel fuel.
Excessive smoke or clogging Poor fuel quality, incorrect fuel-air mixture (e.g., due to elevation), clogged fuel filter. Use high-quality diesel. If operating at high altitudes, the fuel-air mixture might need adjustment (consult a professional if persistent). Clean or replace fuel filter.
Unusual noises Loose components, fan obstruction. Inspect for loose screws or debris in the fan area.
Remote control not working Dead battery, out of range, obstruction. Replace remote battery. Ensure you are within 30m range and there are no significant obstructions.

If the problem persists after attempting these solutions, please contact customer support.

10. User Tips

  • Thermostatic Control: The heater's temperature adjustment feature (10°C to 40°C) indicates it has an automatic thermostatic stop and run function to maintain your desired warmth.
  • Fuel Quality & Elevation: To prevent clogging and ensure optimal performance, always use clean, high-quality diesel fuel. If operating at significantly different elevations, be aware that the fuel-air mixture might be affected, potentially leading to rich combustion and clogging. While the unit is designed for universal use, extreme elevation changes might require professional adjustment or careful monitoring.
  • Pre-heating: Utilize the remote control to pre-heat your vehicle or space before entry, especially in very cold conditions, taking advantage of its 30-meter range.

11. Warranty and Support

Your FDIK Air Heater comes with a commitment to quality and customer satisfaction.

  • Warranty: A one-year warranty is provided for the heater. Please note that vulnerable parts are not included under this warranty.
  • Customer Service: For any inquiries, technical support, or warranty claims, please contact our customer service online via WhatsApp at +86 15935111083.
Image displaying brand promise, CE certification, one-year warranty information, and customer service contact details via WhatsApp.

Figure 10: Brand Promise and Support Information

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.