Introduction
This user manual provides essential information for the safe and effective use of your JoyMaySun Professional Diving Mask with Camera Holder. This product is designed for snorkeling and diving, offering a unique underwater experience and the ability to capture stunning scenes with a compatible action camera.
This Category 1 personal protective equipment (PPE) was conceived to protect the diver's eyes from direct contact with the water. This product complies with the essential health and safety requirements set out in Regulation (EU) 2016/425 and meets the EN 16805:2015 standard.
Important Safety Information
General Precautions
- Please carefully read these instructions before use.
- This product is for snorkeling and diving only. Please engage in these activities with caution and safely.
- Misuse of this product is at the user's own risk.
Snorkeling and Diving Safety
- This mask should only be used by individuals who are capable of snorkeling and swimming.
- Under no circumstances should anyone snorkel or swim alone.
- Always inspect this product before each use. Do not use it if you notice any fault or malfunction.
- Never jump or plunge with your face towards the water. Such impact may damage the product and result in personal injury.
- This equipment can break or shatter if subjected to undue force or impact.
Warnings
- Modifying the product is forbidden. Any alteration to a part may lead to an accident.
- Keep the mask away from heat sources and avoid prolonged exposure to direct sunlight.
- This product should not be used by individuals who are pregnant or suffer from heart disease, asthma, high blood pressure, or otitis media.
- If you experience any dizziness, light-headedness, or shortness of breath while using this product, stop using it immediately.
Product Overview
Setup
Adjusting the Strap
- Place the mask gently on your face.
- Pull the adjustable strap over your head.
- Adjust the strap on both sides until the mask feels snug but comfortable. Ensure no hair is caught under the silicone skirt, as this can cause leaks.
Attaching a Camera
- Ensure your action camera is compatible (e.g., GoPro HERO4, HERO 3+, Hero 3, or Little Ant Movement camera).
- Align your camera with the integrated camera holder on top of the mask.
- Securely fasten the camera using its mounting hardware. Double-check that the camera is stable and will not detach during use.
Operating Instructions
Before Entering Water
- **Seal Test**: Place the mask on your face without the strap. Inhale gently through your nose. The mask should suction to your face and stay in place without holding it. If it doesn't, readjust or check for obstructions.
- **Anti-Fog Application**: If desired, apply an anti-fog solution to the inside of the lenses and rinse thoroughly with clean water before use.
Underwater Use
- Enter the water slowly, allowing the mask to equalize pressure.
- Maintain a calm and steady breathing pattern to conserve energy and avoid hyperventilation.
- Avoid rapid head movements that could dislodge the mask or affect camera stability.
- The tempered glass lenses are designed to be high-impact and shatter-resistant, providing clear underwater vision.
Maintenance
Cleaning
- After each use, wash the product thoroughly with clean, fresh water.
- Do not use solvents or other cleaning products containing alcohol, hydrocarbons, or chlorine, as these may cause damage or breakage of the product components.
Anti-Fog Treatment
- If the mask fogs up easily, wipe the inside of the lenses with an anti-fog solution, then rinse thoroughly with clean water.
Storage
- Store this product in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ensure the mask is completely dry before storing to prevent mold or mildew growth.
Troubleshooting
Mask Fogging
Issue: The mask fogs up during use, obstructing vision.
Solution:
- Ensure the lenses are clean and free of any residues (e.g., from manufacturing).
- Apply an anti-fog solution to the inside of the lenses before each use and rinse thoroughly with clean water.
- Avoid touching the inside of the lenses with your fingers, as oils can contribute to fogging.
Leaks
Issue: Water enters the mask during use.
Solution:
- Ensure the strap is adjusted correctly for a snug, but not overly tight, fit.
- Check for any hair, wetsuit material, or other obstructions under the silicone skirt that might break the seal.
- Perform a seal test before entering the water to confirm proper fit.
Camera Stability
Issue: The attached camera feels loose or unstable.
Solution:
- Verify that the camera is securely fastened to the integrated mount using all appropriate screws and connections.
- Ensure the camera's housing is compatible and properly attached to the mask's mount.
Specifications
| Feature | Detail |
|---|---|
| Model | M2023S |
| Material | Tempered glass, Silicone |
| Dimensions (Approx.) | 225mm x 165mm x 115mm (Length x Width x Height) |
| Weight (Approx.) | 0.231 kg |
| Lens Features | Anti-fog treated, high-impact, shatter-resistant tempered glass |
| Skirt & Strap Material | High quality liquid silicone, non-toxic, corrosion resistant of salt water |
| Camera Compatibility | GoPro HERO4, HERO 3+, Hero 3, Little Ant Movement camera |
User Tips
- Many users have reported that the mask offers good quality, comfort, and effective suction, making it a reliable choice for underwater activities.
- The integrated GoPro base is a highly appreciated feature, allowing for convenient underwater video recording without additional mounts.
- While the lenses are anti-fog treated, some users find that applying an additional anti-fog solution can further enhance clarity, especially in varying water temperatures.
Warranty and Support
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for any warranty claims. For further assistance or support, please contact the retailer or manufacturer directly.
Manufacturer: Shenzhen WASPO Technology Co., Ltd.
Manufacturer Address: No. 127-3, Shunfeng Road, Pingdong Community, Pingdi Street, Longgang District, Shenzhen City, Guangdong Province, China.
For the full user manual in PDF format, please refer to the official documentation provided by the seller.