1. Introduction
The LILYGO T-RSS3 Development Board is a versatile module designed for various embedded applications, featuring an ESP32-C3 microcontroller. It stands out with its integrated RS232 and RS485 communication capabilities, alongside standard Wi-Fi and Bluetooth 5.0 (LE) connectivity. This board is ideal for projects requiring robust serial communication and wireless features, offering a comprehensive solution for developers.
For more detailed information and resources, please refer to the official GitHub repository: https://github.com/Xinyuan-LilyGO/T-RSC3
2. Specifications
Please note: While the product title refers to T-RSS3 ESP32-S3, the detailed specifications and diagrams provided are for the T-RSC3 featuring an ESP32-C3 MCU. This manual will detail the ESP32-C3 variant.

Figure 2.1: T-RSC3 Specifications Overview
| Feature | Description |
|---|---|
| MCU | ESP32-C3 32-bit, RISC-V-based MCU |
| Wireless Connectivity | Wi-Fi, Bluetooth 5 (LE) |
| Flash Memory | 4MB |
| Programming Platforms | Arduino, ESP-IDF |
| Onboard Functions | WS2812 LED, Reset Button, Boot Button, IO2 |
| RS232 Module | RSM232MT5V (Full-duplex, TTL/RS232, 3000V Isolation, 5V/50mA 0.5W Output, 1200-256000bps) |
| RS485 Module | RSM485MT5V (Full-duplex, TTL/RS485, 3000V Isolation, 5V/50mA 0.5W Output, 1200-256000bps) |
| Power Input | DC 5V~12V (via terminal block) |
| USB Interface | Type-C |
| Dimensions (L x W x H) | 67mm x 56mm x 18mm (approximate) |
3. Pinout Diagram
Understanding the pinout is crucial for connecting external components and programming the board. The following diagram illustrates the various pins and their functions for the T-RSC3 (ESP32-C3) variant.

Figure 3.1: LILYGO T-RSC3 Pinout (ESP32-C3)
Key Pin Designations:
- USB-C: For power and data communication with a host computer.
- DC Input (5V~24V): Terminal block for external power supply. Ensure correct polarity.
- RS485: Terminal block with GND, A, B connections. Dedicated pins: RS485_TX (IO10), RS485_RX (IO03), RS485_CON (IO05).
- RS232: DB9 female connector. Dedicated pins: RS232_TX (IO00), RS232_RX (IO01).
- WS2812: Connected to IO04.
- Buttons: RESET, BOOT (connected to IO9), and a user-defined Key (connected to IO02).
- 2x6 Female Header: Provides access to various GPIOs (IO6, IO7, IO8), power (3V3, 5V), and ground (GND) connections.
4. Setup Instructions
Follow these steps to get your LILYGO T-RSS3 Development Board ready for use:
- Unpacking: Carefully remove the board from its packaging.
- Power Connection:
- USB-C: Connect the board to your computer using a USB-C cable. This will provide power and enable data communication for programming.
- External DC Power: For standalone applications or higher power requirements, connect a DC power supply (5V to 24V) to the designated terminal block. Ensure correct polarity (+ and -).
- Driver Installation: Your operating system may automatically install necessary drivers for the USB-to-serial converter. If not, you may need to manually install CP210x or CH340 drivers, depending on the specific chip used on your board. Refer to the GitHub repository for driver links if needed.
- IDE Setup:
- Arduino IDE: Install the Arduino IDE and add ESP32 board support. Select the appropriate ESP32-C3 board from the Tools > Board menu.
- ESP-IDF: For advanced development, set up the Espressif IoT Development Framework (ESP-IDF) environment.
- First Program (Blink Test): Load a simple 'Blink' example sketch (for Arduino) or a basic 'Hello World' example (for ESP-IDF) to verify your setup. Ensure the correct COM port is selected in your IDE.
5. Operating Instructions
Once set up, you can begin operating your LILYGO T-RSS3 Development Board:
- Programming: Write your code in Arduino IDE or ESP-IDF. Connect the board via USB-C. Select the correct board and port, then upload your sketch/firmware. You may need to press the BOOT button while uploading for some configurations.
- Wi-Fi and Bluetooth: Utilize the ESP32-C3's integrated Wi-Fi and Bluetooth 5 (LE) capabilities in your code to connect to networks, communicate with other devices, or create IoT applications.
- RS232 Communication: Connect your RS232 devices to the DB9 female connector. Use the RS232 module (RSM232MT5V) in your code to send and receive serial data. Ensure baud rates match between the board and the connected device.
- RS485 Communication: Connect your RS485 devices to the terminal block. Use the RS485 module (RSM485MT5V) for differential serial communication. Pay attention to A/B line connections and termination resistors if necessary for your network.
- WS2812 LED Control: Program the onboard WS2812 LED (connected to IO04) to provide visual feedback or create light effects.
- Button Usage: The RESET button restarts the MCU. The BOOT button (IO9) is typically used during firmware upload. IO02 is available as a user-defined key.
6. Maintenance
To ensure the longevity and optimal performance of your development board, follow these maintenance guidelines:
- Storage: Store the board in a dry, anti-static environment, away from direct sunlight and extreme temperatures.
- Cleaning: If necessary, gently clean the board with a soft, dry brush or compressed air to remove dust. Avoid using liquids or abrasive materials.
- Handling: Handle the board by its edges to prevent damage to components and to avoid electrostatic discharge.
- Power Supply: Always use a stable power supply within the specified voltage range (DC 5V~24V). Incorrect voltage can damage the board.
7. Troubleshooting
- Q: The board is not recognized by my computer or fails to upload firmware.
- A: Ensure you have installed the correct USB-to-serial drivers (e.g., CP210x or CH340). Check that the USB-C cable is functional and properly connected. Try pressing and holding the BOOT button while initiating the upload process in your IDE, then release it once the upload starts.
- Q: My RS232/RS485 communication is not working.
- A: Verify your wiring connections (TX/RX for RS232, A/B for RS485) and ensure correct polarity. Confirm that the baud rates configured in your code match those of the connected device. For RS485, check if termination resistors are needed for your specific network setup.
- Q: What makes this device different from a regular ESP32 development kit?
- A: The LILYGO T-RSS3 (T-RSC3) uniquely integrates full-duplex high-speed RS232 and RS485 modules, along with an onboard WS2812 LED, directly onto an ESP32-C3 platform. This provides robust industrial communication capabilities not typically found on standard ESP32 development boards, making it suitable for applications requiring reliable wired serial communication alongside Wi-Fi and Bluetooth.
8. User Tips
- Leverage Industrial Communication: The integrated RS232 and RS485 modules are key differentiators. Explore projects that benefit from these robust serial communication protocols, such as connecting to PLCs, industrial sensors, or legacy systems.
- Open-Source Community: LILYGO products often have strong community support. Utilize the provided GitHub repository for example code, libraries, and community discussions to accelerate your development.
- Power Flexibility: The wide DC input range (5V~24V) allows for flexible power solutions in various environments, from USB power to industrial power supplies.
- Integrated LED: The onboard WS2812 LED can be a simple yet effective way to provide status indicators or visual feedback in your projects without needing external components.
9. What's in the Box
The standard package includes:
- 1 x LILYGO T-RSS3 Development Board

Figure 9.1: LILYGO T-RSS3 Development Board
10. Warranty and Support
LILYGO provides support for its products primarily through its official channels and open-source community. For technical assistance, documentation, and community forums, please visit the official LILYGO GitHub repository linked in the Introduction section.
Specific warranty details are not provided in the product information. Please refer to the seller or LILYGO's official website for any warranty-related inquiries.