1. Introduction
This manual provides comprehensive instructions for the Xiaomi Mijia Smart Thermometer 2, a wireless Bluetooth humidity and temperature sensor. Designed for home use, this device offers accurate environmental monitoring and smart home integration capabilities. Please read this manual carefully before use and retain it for future reference.

Figure 1: Xiaomi Mijia Smart Thermometer 2
2. Product Overview
The Xiaomi Mijia Smart Thermometer 2 is a compact and intelligent device designed to monitor temperature and humidity in your living space. It features a clear LCD digital screen and Bluetooth connectivity for integration with the Mi Home App.
2.1 Components

Figure 2: Internal components and battery compartment
- Front Side:
- Screen: LCD digital display for temperature and humidity.
- Top Vent: Ventilation holes at the top. Avoid blocking these during installation and use.
- Back Side:
- Hanging Hole: For wall mounting with a lanyard (lanyard sold separately). To use, open the back cover first.
- Battery Insulation Sheet: A pull-tab to activate the battery upon first use.
- Back Vent: Ventilation holes at the back.

Figure 3: Key Features
3. Setup
3.1 Battery Installation
The device uses a CR2032 button battery. For first-time use, pull out the battery insulation sheet from the back of the device. To replace the battery:
- Open the back cover from the bottom notch.
- Insert a new CR2032 button battery with the positive (+) side facing up.
- Align the back cover with the buckle and press firmly to close.
Video 1: Demonstrating battery installation and initial setup.
3.2 Mounting Options
The thermometer can be installed in several ways after it is functioning correctly:
- Placement Method: Directly place the product on a table, bookshelf, or any suitable flat surface.
- Sticking Method:
- Tear off the release paper from the wall sticker.
- Attach one side of the wall sticker to the adhesive area on the back of the product.
- Remove the other side of the release paper and stick the product onto an indoor wall.
- Hanging Method:
- Open the back cover from the notch at the bottom of the device.
- Hook one end of a lanyard (sold separately) onto the hook inside.
- Pass the lanyard through the hanging hole and close the back cover. The device can now be hung.

Figure 4: Wall sticker and hanging installation methods
3.3 Mi Home App Connection
This product integrates with the Mi Home App, allowing control and linkage with other smart devices. To connect:
- Scan the QR code provided in the original user manual (or search "Mi Home" in your app store) to download and install the Mi Home App.
- Open the Mi Home App. For existing users, it will directly enter the device connection page.
- On the Mi Home App homepage, click "+" in the upper right corner.
- Follow the app's prompts to add the device. Ensure your phone and the device are close to each other for successful Bluetooth pairing.
Important Note: This product is the Chinese version. When connecting to the Mi Home App, you MUST set the App region to "China Mainland" for it to function correctly. Otherwise, it will not work.

Figure 5: Mi Home App region setting to "Chinese mainland"
4. Operating Instructions
4.1 Screen Display
The LCD screen displays current temperature, humidity, and a comfort indicator. The temperature unit is Celsius (°C).

Figure 6: Example of screen display
Comfort Indicator:
| Temperature Range | Humidity Range | Comfort Indicator |
|---|---|---|
| Temperature < 19°C | Any | (--) (Poor comfort) |
| Temperature > 27°C | Any | (--) (Poor comfort) |
| 19°C ≤ Temperature ≤ 27°C | Humidity < 20% | (--) (Poor comfort) |
| 19°C ≤ Temperature ≤ 27°C | 20% ≤ Humidity ≤ 85% | (^_^) (Suitable) |
| 19°C ≤ Temperature ≤ 27°C | Humidity > 85% | (--) (Poor comfort) |

Figure 7: Expressions for comfort levels
Low Battery Reminder:
When the screen displays a low battery icon, please replace the CR2032 battery.
4.2 Smart Linkage (Mi Home App)
After successful connection to the Mi Home App, you can enable smart linkage features:
- On the main interface of the Mi Home Bluetooth Thermometer 2 in the app, click ":" in the upper right corner.
- Select "Smart" and follow the app's prompts to set up linkages with other smart devices.
For example, you can configure the app to automatically switch on a humidifier when indoor humidity is too low, or an air conditioner when indoor temperature is too high. Note that a Mijia Bluetooth Gateway needs to be purchased separately to enable these smart linkage functions.

Figure 8: Smart linkage with an air conditioner

Figure 9: Mi Home App displaying historical temperature and humidity data
The Mi Home App may update, and actual operations might differ slightly from this description. Please refer to the current in-app instructions for the most accurate guidance.
5. Maintenance and Care
5.1 Cleaning
- Avoid immersing the product in water when cleaning.
- For surface dirt, wipe with a soft cloth dampened with a neutral detergent.
5.2 Battery Replacement
Refer to section 3.1 for detailed instructions on how to replace the CR2032 battery.
6. Troubleshooting and Precautions
6.1 Precautions
- The ventilation holes of the product must not be submerged in water.
- After sticking the product to a wall, do not forcibly remove it to avoid damaging the product or the wall surface.
- This product is not suitable for use in environments below 0°C. Keep away from high temperatures, high humidity, and other harsh environments.
- The included battery is a trial battery and may not provide the same battery life as a standard new battery.
- This product is intended for health and lifestyle monitoring and should not be used as a measuring instrument for official or critical applications.
6.2 Common Performance Faults
| Fault Name | Performance Fault Description |
|---|---|
| Xiaomi Mijia Bluetooth Thermometer 2 | Surface damage due to structural or material reasons. |
| Xiaomi Mijia Bluetooth Thermometer 2 | Screen fails to display or data fails to display. |
7. Specifications
| Product Name: | Xiaomi Mijia Bluetooth Thermometer 2 |
| Product Model: | LYWSD03MMC |
| CMIIT ID: | 2019DP8115 |
| Product Material: | ABS, PMMA |
| Product Dimensions: | 43 x 43 x 12.5mm |
| Product Net Weight: | 21g |
| Operating Voltage: | DC2.5V-3V |
| Battery Type: | CR2032 (installed) |
| Wireless Connection: | Bluetooth 4.2 BLE |
| Temperature Measurement Range: | 0°C~60°C |
| Temperature Display Resolution: | 0.1°C |
| Humidity Measurement Range: | 0%-99%RH |
| Humidity Display Resolution: | 1%RH |
| Executive Standard: | QB/WSDJ 2401-2019 |
7.1 Hazardous Substances Information
This table is compiled in accordance with SJ/T 11364 regulations.
| Component Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Circuit Board Assembly | X | O | O | O | O | O |
| Battery Pack | O | O | O | O | O | O |
| Casing | O | O | O | O | O | O |
| Small Mechanical Parts | O | O | O | O | O | O |
O: Indicates that the concentration of the hazardous substance in all homogeneous materials for this part is below the limit specified in GB/T 26572.
X: Indicates that the concentration of the hazardous substance in at least one homogeneous material for this part exceeds the limit specified in GB/T 26572.
8. User Tips
- App Region Setting: Always ensure your Mi Home App region is set to "China Mainland" for seamless connectivity and functionality, especially if you encounter pairing issues.
- Reliable Performance: Users generally find the device to be of great quality and reliable for its intended purpose of monitoring temperature and humidity.
- Easy Connectivity: Many users report no connection problems, indicating a straightforward pairing process when the app region is correctly configured.
9. Warranty and Support
The after-sales service for the Mijia Bluetooth Thermometer 2 strictly adheres to the "Consumer Rights Protection Law of the People's Republic of China" and the "Product Quality Law of the People's Republic of China," implementing a three-guarantee service. The service content is as follows:
9.1 Warranty Period
- Within 7 days from the date of receipt: If the product exhibits performance faults listed in the "Mijia Bluetooth Thermometer 2 Performance Fault Table," confirmed by Xiaomi after-sales service center, you can enjoy free return or exchange services.
- Within 8-15 days from the date of receipt: If the product exhibits performance faults listed in the "Mijia Bluetooth Thermometer 2 Performance Fault Table," confirmed by Xiaomi after-sales service center, you can enjoy free exchange or repair services.
- Within 12 months from the date of receipt: If the product exhibits performance faults listed in the "Mijia Bluetooth Thermometer 2 Performance Fault Table," confirmed by Xiaomi after-sales service center, you can enjoy free repair services.
Friendly Reminder: To ensure safe transportation of the product, it is recommended to keep the packaging box for at least 30 days from the date of receipt.
9.2 Non-Warranty Conditions
The following conditions are not covered by warranty:
- Unauthorized repair, misuse, collision, negligence, abuse, liquid ingress, accident, alteration, incorrect use of non-product accessories, or tearing/altering labels and anti-counterfeit marks.
- Exceeded the validity period of the three-guarantee service.
- Damage caused by force majeure.
- Does not meet the performance fault conditions listed in the "Mijia Bluetooth Thermometer 2 Performance Fault Table."
- Performance faults of this product and its accessories caused by human factors, as listed in the "Mijia Bluetooth Thermometer 2 Performance Fault Table."
Note: The battery and wall sticker are consumables and are not covered by warranty.
9.3 Contact Information
For after-sales service, please call Xiaomi service hotline: 400-100-5678 or visit Xiaomi after-sales service website: www.mi.com/service.
Entrusting Party: Xiaomi Communication Technology Co., Ltd.
Manufacturer: Miaomiaocai Technology (Beijing) Co., Ltd.
Address: Room 21319, Building 37, No. 11 Hepingli East Street, Dongcheng District, Beijing.
Note: The illustrations of products, accessories, user interfaces, etc., in this manual are schematic diagrams for reference only. Due to product updates and upgrades, the actual product and schematic diagrams may differ slightly. Please refer to the actual product.
Manual Version: V1.0
A PDF version of this user manual is available for download: User Manual (PDF)