Introduction
This manual provides essential information for the installation, maintenance, and troubleshooting of your Yamaha Keyboard Key Contact MK Circuit Board PCB. This component is a crucial replacement part designed to restore the functionality of your compatible Yamaha keyboard's keys.
Compatibility
This Key Contact MK Circuit Board PCB is 100% compatible with the following Yamaha keyboard models:
- PSR-78, PSR-150, PSR-190, PSR-220, PSR-225, PSR-230, PSR-240, PSR-248, PSR-260, PSR-262, PSR-270, PSR-273, PSR-275, PSR-280, PSR-282, PSR-340, PSR-450, PSR-530, PSR-540, PSR-550, PSR-620, PSR-630, PSR-640, PSR-730, PSR-740
- OR700, PSR-S700, PSR-S710, PSR-S750, PSR-S770, PSR-S900, PSR-S910, PSR-S950, PSR-S970
Please ensure your keyboard model is listed above for proper compatibility.
Product Overview
The Key Contact MK Circuit Board PCB is a replacement component for the keybed of compatible Yamaha keyboards. It is responsible for registering key presses and transmitting them to the keyboard's main processing unit. The product is available in different configurations, including short and long boards, and specific note counts (e.g., 27-note, 34-note) to match various keyboard designs.
Setup Instructions
Replacing a key contact circuit board requires careful handling and some technical expertise. If you are not comfortable performing this repair, it is recommended to seek assistance from a qualified technician.
- Power Off: Ensure your Yamaha keyboard is completely powered off and unplugged from the electrical outlet before beginning any work.
- Disassembly: Carefully disassemble your keyboard to access the keybed and the existing key contact circuit boards. Refer to your specific keyboard model's service manual for detailed disassembly instructions.
- Identify Boards: Identify the faulty circuit board(s) that need replacement. Note whether it is a long board (e.g., 34-note, XR564) or a short board (e.g., 27-note, XR565).
- Remove Old Board: Gently disconnect any connectors and carefully remove the old circuit board(s). Be mindful of ribbon cables and delicate connections.
- Inspect New Board: Before installation, thoroughly inspect the new circuit board(s) for any physical damage, bent pins, or cut diodes.
- Install New Board: Align the new circuit board(s) with the mounting points and connectors. Secure it in place, ensuring all connections are firm and correctly seated.
Handle the circuit board carefully, ideally in its protective packaging until ready for installation. - Reassembly: Carefully reassemble your keyboard, ensuring all screws and components are returned to their original positions.
- Test: Plug in and power on your keyboard. Test all keys associated with the replaced circuit board to ensure proper functionality.
Caution: Electrostatic discharge (ESD) can damage electronic components. Take appropriate ESD precautions (e.g., using an anti-static wrist strap) during installation.
Operating Instructions
This product is a replacement part for the internal mechanism of your keyboard. Once correctly installed, its operation is integrated seamlessly with your Yamaha keyboard's existing functions. There are no specific operating instructions for the circuit board itself; its function is to enable the keys to work as intended by the keyboard manufacturer.
Maintenance
To ensure the longevity and proper function of your key contact circuit board:
- Keep Clean: Avoid dust and debris accumulation within the keyboard, as this can interfere with key contacts. Regular gentle cleaning of the keybed area (when accessible) is recommended.
- Avoid Moisture: Protect your keyboard from spills and high humidity, which can damage electronic components.
- Gentle Handling: When disassembling or reassembling the keyboard, handle the circuit boards and connectors with care to prevent bending or breaking.
Troubleshooting
If you encounter issues after installing the new circuit board, consider the following:
- Keys Not Responding:
- Double-check all ribbon cable connections to ensure they are fully seated and correctly oriented.
- Verify that the correct type of circuit board (e.g., 27-note, 34-note, short, long) was installed in the appropriate section of the keybed.
- Inspect the new board for any visible damage that might have occurred during shipping or installation.
- Intermittent Key Function:
- Ensure the key contacts on the board are clean and free from any foreign material.
- Confirm that the rubber contact strips (if separate) are correctly aligned over the circuit board contacts.
- Incorrect Note Output:
- This is highly unlikely if the board is correctly installed and compatible. Re-verify compatibility with your specific keyboard model.
If problems persist, it is advisable to consult a professional keyboard repair technician.
Specifications
| Feature | Detail |
|---|---|
| Product Type | Key Contact MK Circuit Board PCB |
| Compatibility | Yamaha PSR-series and OR700/PSR-S-series keyboards (see Compatibility section for full list) |
| Material | Printed Circuit Board (PCB) |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 52 cm x 10 cm x 6 cm (approx.) |
| Package Weight | 0.4 kg (approx.) |
| Available Variants | Short and Long board, XR564 34-note board, XR565 27-note board |
User Tips
- Careful Inspection: Upon receiving your order, carefully inspect the circuit boards for any signs of damage, such as cut diodes or bent components, before attempting installation.
- Visual Confirmation: Compare the received boards with product images to ensure they match your expectations and the required part for your keyboard.
- Test Thoroughly: After installation, test every key on the affected section of your keyboard to confirm full functionality.
- Compatibility Check: Always double-check the compatibility list to ensure the board is suitable for your specific Yamaha keyboard model.
Warranty and Support
For any issues related to product defects or functionality, please contact the seller directly. Ensure you retain your proof of purchase for any warranty claims. For technical assistance with installation or advanced troubleshooting, it is recommended to consult a professional keyboard repair service.