Introduction
The Akko MONSGEEK MG108W is a 108-key barebone mechanical keyboard kit designed for gamers, office workers, programmers, and typists. It offers versatile dual-mode connectivity, allowing for both wired USB Type-C and wireless 2.4GHz connections. This kit provides a customizable platform for building your ideal mechanical keyboard, featuring hot-swappable sockets and sound-dampening components for an enhanced typing experience.

Setup
Package Contents
- MONSGEEK MG108W Keyboard Kit
- 2.4G Receiver
- USB-C Cable
- User Manual
Connectivity
The MG108W supports both wired and wireless connections:
- Wired Connection: Connect the keyboard to your device using the provided USB Type-C cable.
- Wireless 2.4GHz Connection: Insert the 2.4G receiver into an available USB-A port on your device. The keyboard will automatically connect.

Installing Switches and Keycaps
The MG108W features full-key hot-swappable sockets, compatible with both 3-pin and 5-pin mechanical switches. No soldering is required.
- Align the pins of your desired mechanical switch with the hot-swappable socket on the PCB.
- Gently press the switch until it clicks into place. Ensure the switch is fully seated and the pins are not bent.
- Once all switches are installed, place your keycaps onto the switches.

Adjusting Keyboard Height
The keyboard is equipped with two adjustable feet, offering three levels of typing angles: approximately 5°, 7.5°, and 11°. Adjust the feet to your preferred ergonomic position.

Cable Management
The keyboard features 3-directional routing for the USB-C cable, allowing for better cable organization on your desk.

Operating Instructions
Switching Connection Modes
The keyboard is equipped with a dual-mode controller chip. Refer to the physical switch on the keyboard (if present) or the user manual for specific key combinations to switch between 2.4GHz wireless and USB-C wired modes.
N-Key Rollover
The MG108W supports N-Key Rollover (NKRO) technology, ensuring that every keystroke is registered accurately, even when multiple keys are pressed simultaneously. This prevents ghosting and missed inputs, which is crucial for fast typing and gaming.
Battery Information
The keyboard features a 500mAh battery. Expected battery performance:
- Standby Time: Up to six months.
- Continuous Use (without LED indicator): Approximately 167 hours.
- Continuous Use (with 2 LED indicators on): Approximately 84 hours.
- Average Runtime: Approximately 4 months (based on 4 hours/day usage).
Software Customization
Key customization can be performed through the MonsGeek Cloud Driver software. This software allows for remapping keys and other personalized settings. Please download the latest version of the software from the official MonsGeek website.
Important Note on Backlighting
The MG108W keyboard kit does not support RGB backlighting.
Maintenance
Cleaning
To clean your keyboard, disconnect it from your device. Use a soft, lint-free cloth to wipe down the case. For keycaps, a mild soap solution and water can be used, ensuring they are completely dry before reattaching. For switches, use compressed air to remove dust and debris.
Switch Replacement
Due to the hot-swappable design, individual switches can be easily replaced. Use a switch puller tool to carefully remove a switch. Insert a new compatible 3-pin or 5-pin mechanical switch, ensuring its pins are straight and align with the PCB sockets before pressing it firmly into place.
Sound-Absorbing Foam Layers
The keyboard includes EVA plate foam and case foam for noise reduction. These components are designed to minimize ping and hollow sounds. While these foams enhance the acoustic profile, using thicker foam layers may reduce the overall flex of the keyboard. Adjust based on personal preference.

Troubleshooting
- Keyboard not responding (Wired): Ensure the USB-C cable is securely connected to both the keyboard and your device. Try a different USB port or cable.
- Keyboard not responding (Wireless): Ensure the 2.4G receiver is properly inserted and the keyboard is in 2.4GHz wireless mode. Check battery level.
- Specific keys not working: Remove the keycap and switch for the affected key. Inspect the switch pins for bends or damage. Replace the switch if necessary.
- Battery not charging: Ensure the USB-C cable is connected to a working power source.
- Software issues: Ensure you have the latest MonsGeek Cloud Driver installed. Restart your computer and try again.
Specifications

| Feature | Detail |
|---|---|
| Model | MG108W |
| PCB Orientation | South-facing PCBa / North-facing PCBa |
| Connection | USB-C Wired & 2.4G Wireless |
| Mount | Tray |
| Case Material | ABS |
| Color | Black/White |
| Layout | Full-sized 108-Key |
| RGB | N (No) |
| Hotswap | Y (Yes) |
| Battery | 500mAh |
| PCB Thickness | 1.6mm |
| Plate | Iron |
| Plate Foam | Y (2mm) |
| Case Foam | Y (Yes) |
| Stabilizer | Plate Stabilizer (pre-installed) |
| Software | MonsGeek Cloud Driver |
| Size | 44.55cm x 13.75cm x 4.18cm |
| Barebone Weight | About 1150g |
User Tips
- Switch Selection: Experiment with different 3-pin or 5-pin mechanical switches to find the typing feel and sound profile that best suits your preference.
- Foam Customization: The included plate and case foams are designed for noise reduction. If you prefer a more flexible typing experience, you may consider removing the case foam, though this might increase case ping.
- Cable Management: Utilize the 3-directional cable routing to keep your desk tidy and prevent cable interference.
- Software Updates: Regularly check the MonsGeek official website for updates to the Cloud Driver software to ensure you have access to the latest features and bug fixes.
Warranty and Support
For Akko acrylic, PC, and aluminum DIY Kits, Akko offers parts replacement only due to the high level of customizability of these models. Akko is not responsible for parts that have been deeply altered or damaged by user modification. For further support or warranty claims, please contact Akko customer service directly.