1. Introduction
Thank you for choosing the BlitzWolf BW-VP13 Home Theater Video Projector. This manual provides essential information for setting up, operating, and maintaining your projector to ensure optimal performance and longevity. Please read this manual thoroughly before using the product and keep it for future reference.
2. Safety Information
- Do not look directly into the projector lens when the lamp is on.
- Ensure proper ventilation around the projector to prevent overheating.
- Keep the projector away from water or any liquids.
- Do not attempt to disassemble or modify the projector. Refer all servicing to qualified personnel.
- Use only the power adapter provided with the projector.
- Keep the projector out of reach of children.
3. Package Contents
Please check that all items are present and in good condition:
- BlitzWolf BW-VP13 Projector
- Remote Control
- Power Cable
- User Manual (this document)
4. Product Overview
4.1 Key Features
- Native 1920x1080P Full HD Resolution
- 6000 Lumens Brightness with 3500:1 Contrast Ratio
- 2.4G/5G Dual-band WiFi for seamless wireless screen mirroring
- Bluetooth 5.0 for connecting external audio devices
- Manual Focus and ±15° Vertical Keystone Correction
- Built-in Dual 3W4Ω Stereo SRS Speakers
- Multiple Ports for versatile compatibility (SD Card, Audio Out, HD, USB, VGA, AV)
- LED Lamp Life: 40,000 hours
4.2 Projector Layout and Ports
Familiarize yourself with the projector's physical components and connection ports.
Port Descriptions:
- SD Card Slot: For inserting SD/SDHC/SDXC memory cards.
- Audio Output Port (3.5mm): For connecting external headphones or speakers.
- HD1.4 Port (x2): For connecting devices via HDMI cable (e.g., laptops, gaming consoles).
- USB2.0 Port (x1): For connecting USB flash drives or external HDDs (requires external power for HDDs).
- VGA Port: For connecting older computers or devices with VGA output.
- AV Port: For connecting devices using an AV cable.
- AC Input: Power input for the projector.
5. Setup
5.1 Placement
Place the projector on a stable, flat surface or mount it on the ceiling (Front, Rear, or Ceiling installation methods supported). Ensure the projector is within the optimal projection distance of 1.5-5.5 meters from the screen to achieve a screen size between 50-180 inches.
5.2 Power Connection
- Connect the power cable to the AC Input port on the projector.
- Plug the other end of the power cable into a power outlet (AC 100~240V@50/60Hz).
5.3 Initial Adjustments
- Manual Focus: Rotate the focus ring on the projector lens until the image is sharp and clear.
- Keystone Correction: Use the keystone correction dial (usually located near the lens) to adjust the image shape if it appears trapezoidal. The BW-VP13 supports ±15° vertical keystone correction.
- Zoom Function: The projector features a 55%-100% zoom function to adjust the screen size without moving the projector. This can typically be adjusted via the remote or on-screen menu.
6. Operating Instructions
6.1 Power On/Off
- Power On: Press the power button on the projector or the remote control.
- Power Off: Press the power button again. The projector will go through a cool-down cycle before completely shutting down.
6.2 Input Source Selection
Use the 'Source' button on the remote control or the projector's control panel to select your desired input source (e.g., HD1, HD2, USB, AV, VGA, SD Card).
6.3 Screen Mirroring (Wireless)
The BW-VP13 supports wireless screen mirroring via 2.4G/5G WiFi for iOS and Android devices.
- Ensure your projector and mobile device are connected to the same WiFi network (preferably 5G for smoother performance).
- Select the 'Screen Mirroring' or 'Cast Screen' option on the projector's menu.
- On your mobile device, enable screen mirroring (e.g., 'Screen Mirroring' on iOS, 'Smart View'/'Cast' on Android) and select the projector from the list of available devices.
6.4 Screen Mirroring (Wired for iOS)
For iOS devices, you can also use wired screen mirroring via a USB cable:
- Connect your iOS device to the projector's USB port using a compatible USB cable.
- Select the appropriate USB input source on the projector.
- Follow any on-screen prompts on your iOS device to trust the connection.
6.5 Bluetooth Audio Output
Connect external Bluetooth speakers or headphones for an enhanced audio experience.
- Enable Bluetooth on your external audio device and set it to pairing mode.
- On the projector, navigate to the Bluetooth settings menu.
- Scan for available devices and select your audio device to pair.
7. Maintenance
7.1 Cleaning
- Lens: Use a soft, lint-free cloth specifically designed for optical lenses. Do not use abrasive cleaners.
- Casing: Wipe the projector casing with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly.
- Ventilation Vents: Regularly check and clean the ventilation vents to ensure proper airflow and prevent dust buildup. Use a soft brush or compressed air.
7.2 Lamp Life
The LED light source in your BW-VP13 projector has an estimated life of 40,000 hours. Regular cleaning and ensuring proper ventilation will help maximize the lamp's lifespan.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen | Power cable disconnected; Incorrect input source; Device not connected properly. | Check power connection; Select correct input source; Reconnect source device. |
| Image is blurry | Out of focus; Projector lens dirty. | Adjust manual focus ring; Clean the projector lens. |
| Image is trapezoidal | Projector not perpendicular to screen. | Adjust keystone correction dial. |
| No sound | Volume too low; Incorrect audio output selected; External audio device not connected/paired. | Increase volume; Check audio settings; Connect/pair Bluetooth device or external speakers. |
| Wireless screen mirroring laggy/disconnects | Weak WiFi signal; Too many devices on network; Distance from router. | Ensure 5G WiFi connection; Reduce network congestion; Move projector closer to router. |
9. Specifications
| Feature | Specification |
|---|---|
| Product Category | Home Theater Projector |
| Light Source | LED |
| Display Technology | LCD |
| Display Chip Size | 4.41’’ TFT LCD |
| Lamp Life | 40,000h |
| Operating System | No |
| Display Resolution | 1920x1080P |
| Maximum Compatible Resolution | 1920x1080P |
| Contrast Ratio | 3500:1 |
| Throw Ratio | 1.5 |
| Keystone Correction | Manual Vertical ±15° |
| Focus Method | Manual |
| Aspect Ratio | 16:9, 4:3 |
| Speaker Power | 3W4Ω |
| Wireless Mirroring | Yes (2.4G/5G WiFi) |
| Bluetooth Output | Yes (Bluetooth 5.0) |
| Installation Method | Front, Rear, Ceiling |
| Video Format Support | avi/mp4/mov/mpg/mpeg/ts/tp/m2ts/dat/flv/swf/asf/vob/rm/rmvb/3gp/3gpp |
| Audio Format Support | mp3/avi/wmv/mkv/dat/vob/mpg/,peg/ts |
| Photo Format Support | jpg/jpeg/png/bmp |
| 3D Function | Red and blue 3D |
| Projection Distance | 1.5-5.5m |
| Projection Size | 50-180 inches |
| Remote Control | Infrared |
| Power Supply | AC 100~240V@50/60Hz |
| Maximum Power | 90W |
| SD Card Max Support | SD2.0/SDHC 32GB, SDXC 1TB |
| USB Flash Drive/HDD Max Support | FAT32 192GB, NTFS 2TB (External Power Supply for HDD) |
| USB Flash Drive Format | FAT16, FAT32, NTFS |
| HD Port | HDx2 |
| VGA Port | VGAx1 |
| AV Port | AVx1 |
| USB Port | USB2.0x1 |
| SD Card Slot | SDx1 |
| Audio Output Port | 3.5mm Audio Outputx1 |
| Product Size | 234.5*187.6*96mm |
10. User Tips
- For the best viewing experience, use the projector in a dark environment.
- When using external storage (USB drive/HDD), ensure it is formatted correctly (FAT32 for up to 192GB, NTFS for up to 2TB). External HDDs may require their own power supply.
- If experiencing issues with wireless screen mirroring, try connecting both the projector and your device to a 5G WiFi network for improved stability and speed.
11. Warranty and Support
For warranty information and technical support, please refer to the official BlitzWolf website or contact your retailer. Keep your purchase receipt as proof of purchase.
