Makerbase MKS DLC32 V2.1

Contents

Makerbase MKS DLC32 V2.1 Offline Controller User Manual

Model: MKS DLC32 V2.1 | Brand: Makerbase

1. Introduction

The MKS DLC32 motherboard kit is an offline engraving master control kit designed for desktop engraving machines. It features a 32-bit high-speed ESP32 module, integrated WIFI functionality, and direct support for a 3.5-inch touch color screen. This enables fast engraving, web-based control, and mobile phone app control. The board's mounting holes and size are compatible with MKS DLC, and it works seamlessly with GRBLaser and LightBurn PC software.

For a visual overview of the MKS DLC32 V2.1, please watch the introduction video below:

Video Description: This video demonstrates the features and operation of the MKS DLC32 V2.1 controller, including its offline touch screen interface, web control, and mobile app connectivity.

Further technical details and resources can be found on the official GitHub repository: https://github.com/makerbase-mks/MKS-DLC32

2. Warnings & Safety Information

2.1 Fire and Burn Hazard

  • High temperatures generated during processing may ignite the workpiece, smoke, or surrounding materials.
  • The processing area must be kept clear of flammable substances and equipped with fire extinguishing equipment.
  • After processing, the workpiece and machine components (e.g., spindle, laser head) may remain hot for an extended period; verify full cooling before handling.

2.2 Mechanical Injury Hazard

  • High-speed rotating spindles, moving gantries, belts, and lead screws pose serious risks of crushing, cutting, or entanglement injuries.
  • Before performing any installation, commissioning, cleaning, or maintenance operation, disconnect the machine from the main power supply.

2.3 Electrical Hazard

  • High-voltage circuits are present internally. Unauthorized personnel must not open the electrical control cabinet. All electrical connections must comply with local regulations and be performed by qualified electricians.

2.4 Hazardous Substances and Fumes

  • Processing certain materials (e.g., plastics, composites, coated metals) may generate toxic, carcinogenic, or irritating fumes and dust. Use only in environments equipped with an effective Local Exhaust Ventilation (LEV) system.

3. Product Features

3.1 ESP32 Module

The MKS DLC32 V2.1 motherboard integrates an ESP32-WROOM-32U (8M Flash) module. This module features a built-in ESP32-D0WD-V3 chip, an Xtensa® dual-core 32-bit LX6 microprocessor, supporting a clock frequency up to 240 MHz. It includes 8192 KBytes of Flash memory and 520 KBytes of RAM, providing powerful performance for various application scenarios.

ESP32-WROOM-32U module details on MKS DLC32 V2.1 board

Image Description: A close-up view of the MKS DLC32 V2.1 board highlighting the ESP32-WROOM-32U module and its specifications (8M Flash, 8192 KBytes Flash, 520 KBytes RAM).

3.2 Offline Engraving

The MKS DLC32 V2.1 supports offline engraving, allowing you to control your laser engraver without a direct PC connection. This is achieved through the matching 3.5-inch touch screen for convenient control and file management.

Offline engraving interface screenshot on MKS DLC32 V2.1 display

Image Description: A screenshot of the MKS DLC32 V2.1 touch screen interface showing options for sculpture, tool, control, and adjustment, along with status information like position and WiFi connection.

3.3 Web Control

The MKS DLC32 V2.1 features a developed web interface. By logging into the motherboard's IP address via a browser on your local area network (LAN), you can perform various engraving operations, file transfers, and more.

Web control interface screenshots for MKS DLC32 V2.1

Image Description: Screenshots of the ESP32-WEB interface, showing control options, SD file management, settings, and language selection for the MKS DLC32 V2.1.

3.4 Mobile App Control

A dedicated mobile phone application has been developed for the MKS DLC32 V2.1. This app allows you to edit pictures, convert them into engraving files, and transfer them to the main board, in addition to conventional control functions.

Mobile app interface screenshots for MKS DLC32 V2.1

Image Description: Screenshots of the mobile application interface, displaying options for connecting to the machine, selecting images, adjusting parameters, and initiating engraving.

3.5 High Engraving Speed

Thanks to the high-speed IO flip speed of the main control module and a powerful timer, the MKS DLC32 V2.1 can achieve a very high engraving speed, reaching up to 8000mm/min.

Engraving speed demonstration with MKS DLC32 V2.1

Image Description: A laser engraving machine in operation, controlled by the MKS DLC32 V2.1, demonstrating its high-speed engraving capability.

3.6 Software Compatibility

The MKS DLC32 V2.1 is compatible with popular computer host software such as GRBLaser and LightBurn.

GRBLaser and LightBurn software compatibility with MKS DLC32 V2.1

Image Description: Screenshots of the GRBLaser and LightBurn software interfaces, indicating their compatibility with the MKS DLC32 V2.1 controller.

4. Package Contents

The MKS DLC32 V2.1 controller is available in various sets. Please refer to your specific purchase for the exact contents.

  • Set 1: MKS DLC32 *1, USB Cable *1
  • Set 2: MKS DLC32 *1, USB Cable *1, MKS TS35-R*1, 10PIN 40CM flat cable*2, A4988 Motor Driver*3, Heat Sink*3
  • Set 3: MKS DLC32 *1, USB Cable *1, MKS TS35-R*1, 10PIN 40CM flat cable*2
  • Set 4: MKS T-Armor*1, MKS B-Armor*1, Hexagon screw post M3*6 *4, M3 Hex nuts *4
  • Set 5: MKS TS35-R*1, 10PIN 40CM flat cable*2
  • Set 6: MKS TS24-R*1, 10PIN 40CM flat cable*2
  • Set 7: MKS DLC32 *1, USB Cable *1, MKS TS35-R*1, 10PIN 40CM flat cable*2, TMC2209 Motor Driver*3, Heat Sink*3
  • Set 8: MKS DLC32 *1, USB Cable *1, TMC2209 Motor Driver*3, Heat Sink*3
  • Set 9: MKS DLC32 *1, USB Cable *1, A4988 Motor Driver*3, Heat Sink*3

Note: If your chosen option includes a fan, it will be sent. Otherwise, no fan is included.

5. Setup and Installation

5.1 General Installation Procedure

  1. Preparation: Confirm compatibility of the accessory model. Ensure the workspace is clean and well-ventilated.
  2. Power Disconnection: Shut down the host machine and unplug it from the main power source. Wait until all components—especially the laser source and spindle motor—are fully cooled.
  3. Removal of Old Component (if applicable): Refer to the original manufacturer's manual; record wiring connections and mechanical positioning, then carefully remove the component to be replaced.
  4. Installation of New Component: Install the new accessory in reverse order. Ensure all mechanical connections are securely tightened and all electrical connections are correct, properly polarized, and firmly secured.
  5. Calibration: After installation, recalibrate the relevant systems (e.g., laser power, tool length, engraving area) as specified in the original manufacturer's manual.

5.2 Wiring Diagram

Refer to the following diagram for proper wiring of the MKS DLC32 V2.1 controller:

Detailed wiring diagram of MKS DLC32 V2.1 board

Image Description: A detailed diagram of the MKS DLC32 V2.1 board, labeling all major interfaces including motor drive slots (1), microstep setting (2), external stepper driver (3), I2C interface (4), fire detector interface (5), and Z endstop/gyroscope interface (6). It also shows power input, USB-PC interface, TF card slot, runback button interface, and touch screen connector.

5.3 MKS Armor Assembly (Optional)

MKS Armor is an externally mounted protective casing for DLC32 motherboards. It consists of two layers (top and bottom) to prevent accidental contact and short-circuits. The design ensures adequate space for heat dissipation, and reserved screw holes allow for easy integration into your machine's structure.

MKS DLC32 V2.1 board with MKS Armor assembled

Image Description: An assembled MKS DLC32 V2.1 board with the MKS Armor, showing the protective layers and mounting posts.

5.4 Display Firmware Update (for TS24 display)

If you are using the TS24 display with the DLC32 motherboard, it is crucial to refresh the firmware of the TS24 display before use to ensure proper functionality. The display may show mirrored text if the firmware is not updated.

Download the latest firmware from: https://github.com/makerbase-mks/MKS-DLC32/tree/main/firmware/TS24

6. Operating Procedures

6.1 Offline Control via TFT Touch Screen

The MKS DLC32 V2.1 allows for direct control of your laser engraving machine through its integrated 3.5-inch touch screen. You can load engraving files, set parameters, and initiate engraving jobs directly from the display.

6.2 Web Interface Control

To use web control, connect your MKS DLC32 V2.1 to your local network (LAN) via WiFi. Access the board's IP address through a web browser on a computer or mobile device. The web interface provides comprehensive control over engraving parameters, file management, and real-time status monitoring.

6.3 Mobile Application Control

Download and install the dedicated mobile application for the MKS DLC32 V2.1. The app allows you to connect to the controller via WiFi, prepare engraving designs (edit pictures, convert to engraving files), and send them to the board. You can also monitor and control the engraving process from your smartphone.

7. Maintenance

7.1 Testing and Verification

After any installation or modification, conduct a low-power/low-speed no-load test under safe conditions. Verify smooth operation, absence of abnormal noise, and absence of alarms before resuming normal use.

7.2 Environmental Conditions

  • Indoor use only.
  • Operating Temperature: 0°C to 40°C.
  • Storage Temperature: -10°C to 50°C.
  • Ingress Protection Rating: IP20 (dust-protected, no water protection).
  • Do not use in damp, dusty, corrosive-gas, or explosive environments.

7.3 Usage Restrictions

This accessory is not designed for industrial continuous-duty operation. Observe the maximum duty cycle specified in the equipment manual. Do not use this accessory for any purpose other than its intended design application.

8. Troubleshooting

8.1 Display Shows Mirrored Text

Problem: The connected display (e.g., TS24) shows mirrored or incorrect text.

Solution: This often indicates that the display's firmware needs to be updated. Please refer to Section 5.4 for instructions and the download link for the correct firmware.

8.2 GRBL Firmware Installation

Question: Is GRBL firmware for laser installed, or do I need to install it?

Answer: The MKS DLC32 V2.1 is designed to be compatible with GRBL. While it typically comes with a functional firmware, specific laser engraving setups or advanced features might require updating or flashing a particular GRBL firmware version. Refer to the official GitHub page for the latest firmware and flashing instructions.

9. Specifications

The following table provides a comparison of key parameters between MKS DLC and MKS DLC32 V2.1:

Table comparing MKS DLC and MKS DLC32 parameters

Image Description: A table detailing the differences between MKS DLC and MKS DLC32, including MCU, MCU frequency, Flash, RAM, and Laser Speed.

Extended specifications for the MKS DLC32 V2.1:

Detailed specifications table for MKS DLC32 V2.1

Image Description: A table listing specifications such as Whole Size, Voltage, MCU, MCU Freq, Flash, RAM, Laser Speed, Offline Display, Firmware, Serial Driver, and Axis for both MKS DLC and MKS DLC32.

Extended specifications table for MKS DLC32 V2.1

Image Description: An extended table showing features like WiFi On Board, Web control, APP control, SD Card support, MKS Laser Tool, Machine Available, Stepper Driver compatibility, Additional Driver support, Laser power compatibility, and Software Compatible for MKS DLC and MKS DLC32.

9.1 Physical Dimensions

The MKS DLC32 V2.1 board has the following dimensions:

MKS-T-Armor dimensions diagram

Image Description: A technical drawing showing the dimensions of the MKS-T-Armor, which corresponds to the MKS DLC32 board's footprint, with measurements of 90.000 mm x 70.000 mm.

MKS-B-Armor dimensions diagram

Image Description: A technical drawing showing the dimensions of the MKS-B-Armor, which corresponds to the MKS DLC32 board's footprint, with measurements of 90.000 mm x 70.000 mm.

10. User Tips

  • Compatibility: The MKS DLC32 V2.1 has been successfully installed and used with machines like the Acmer P1 S Pro, indicating good compatibility with various laser engravers.
  • Display Firmware: If you encounter issues with the display (e.g., mirrored text), ensure you have updated the display's firmware to the latest version from the official GitHub repository.

11. Warranty & Support

11.1 Manufacturer Information

Brand: TWOTREES (Note: While the product is Makerbase, the provided OCR text lists TWOTREES as the manufacturer for accessories.)
Manufacturer Name: Shenzhen Two Trees Technology Co., Ltd.
Address: 402, Building 11, No. 9, Qilin Road, Nankeng Community, Sakata Street, Longgang District, Shenzhen City, Guangdong Province

11.2 EU Responsible Person Information

Name: AMZ ECREP SL
Address: Calle Gran Via 49, 7 Deb. Spain

11.3 Disclaimer

By using this product, the user acknowledges and agrees to the following terms:

  1. The manufacturer and seller shall not be liable for any direct or indirect damages resulting from:
  2. Failure to operate, maintain, or store the device in accordance with this manual and all accompanying safety guidelines.
  3. Unauthorized modification of the device, or use of non-OEM or incompatible accessories or software.
  4. Use of the device outside its intended purpose, or processing of prohibited or unknown materials.
  5. Installation, commissioning, or repair performed by personnel not authorized or trained by the manufacturer.
  6. Damage caused by force majeure or unforeseen events such as fire, flood, lightning strike, or abnormal voltage.
  7. Normal wear and tear (e.g., natural power decay of the laser module over time).

11.4 Additional Resources

A comprehensive user manual in PDF format is available for download: User manual (PDF)


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.