Introduction
The DM FD063 Encrypted USB Drive is designed to provide secure storage for your sensitive data. Featuring AES 256-bit hardware encryption and physical password protection, this USB 3.2 flash drive ensures your files are protected against unauthorized access. It includes functions for password reset, data wiping, and automatic locking to enhance data security.
Figure 1: Front view of the DM FD063 Encrypted USB Drive
Video 1: Product demonstration highlighting unboxing, size, encryption, and data transfer.
Package Contents
- 1 x DM FD063 Encrypted USB Drive
Setup
Initial Setup
- The initial password for the device is 1122334.
- The device is Plug and Play, requiring no additional drivers for basic functionality.
- Before first use, or if the device has been stored for a long time, it is recommended to charge it by plugging it into a computer's USB port. A full charge takes approximately 1-2 hours. The device can be used normally while charging.
Figure 2: DM FD063 USB Drive connected to a laptop.
Operating Instructions
Indicator Lights Meaning
| Indicator Status | Meaning |
|---|---|
| Red light on | Start accepting password input |
| Steady red light | Enter the password again |
| Blue light on | Unlocked |
| Steady blue light | Accessible equipment |
| Red and blue lights flash | Keys are valid |
Unlocking the USB Drive
- Press and hold the power button (
) for 3 seconds. The red light will turn on. - Enter your password. The red and blue lights will flash simultaneously, indicating a valid key input.
- Click the unlock button (
) to confirm the unlock. The blue light will turn on, indicating the drive is unlocked. - You can now plug the USB drive into your computer to perform data transfer.
- After unplugging the USB drive from the computer, it will automatically lock.
Changing the Password
- Unlock the USB drive using your current password (as described above). The blue light should be on.
- Click the unlock button (
). The red and blue lights will flash once. - Enter your desired new password. The password must be between 6 and 15 digits. Avoid using continuous numbers (e.g., 123456) or single repeating numbers (e.g., 888888).
- Press the unlock key to confirm. The red and blue lights will flash simultaneously.
- Enter the new password again.
- Press the unlock key to confirm. The red light will turn off after 3 seconds, and the blue light will remain on, indicating the new password has been successfully set.
Automatic Locking (Auto Lock)
The USB drive supports automatic locking to ensure data security. If the drive is unlocked but not plugged into a computer within 30 seconds, or if it is pulled out from the computer, it will automatically lock. This prevents unauthorized access if the drive is left unattended or misplaced.
Figure 3: Automatic locking mechanism for enhanced security.
Maintenance
- Charging: Due to the standby power consumption of the encrypted USB drive, if it remains in standby for more than one week, or if the indicator light does not illuminate when pressing the unlock button, it may require charging. Plug the drive into a computer's USB port for 1-2 hours to fully charge it. The drive can be used normally during the charging process.
- Data Backup: Regularly back up important data stored on the drive to prevent loss, especially if you frequently enter incorrect passwords.
- Physical Care: The drive features a durable alloy housing. Keep it clean and avoid exposing it to extreme temperatures or moisture.
Troubleshooting
- Forgotten Password: If you forget your password, the manufacturer cannot help you recover it or the data. The only option is to reset the USB drive, which will automatically delete all stored data. The drive will then be initialized with the default password (1122334). After resetting, you will need to format the drive on a computer to continue using it.
- Incorrect Password Attempts: If 7 consecutive incorrect passwords are entered, the red and blue lights will flash quickly. If the wrong password is entered 10 times, the USB drive will automatically reset, erasing all stored data and initializing the password to 1122334. You will then need to press and hold the power button for 3 seconds, enter the initial password to unlock, and perform a formatting operation on your computer to resume use.
- Password Requirements: Ensure your password is between 6 and 15 digits. Avoid using sequential numbers (e.g., 123456) or repeating single numbers (e.g., 888888).
- Large File Transfer Issues: The default file system is FAT32, which has a 4GB file size limit. For transferring files larger than 4GB, it is recommended to format the USB drive to EXFAT.
- Drive Not Responding/Indicator Lights Off: If the drive has been in standby for over a week or the indicator lights do not respond, plug it into a computer for 1-2 hours to charge it.
Figure 4: Important notes on product features and troubleshooting scenarios.
Specifications
| Feature | Detail |
|---|---|
| Model Number | FD063 |
| Capacity | 32GB, 64GB, 128GB, 256GB |
| Interface Type | USB 3.2 (backward compatible with USB 3.0/2.0) |
| Encryption | AES 256-bit Hardware Encryption |
| Material | Metal / ABS Alloy |
| Color | Black |
| Product Size | 84mm (L) x 25mm (W) x 11mm (H) |
| File System (Default) | FAT32 (EXFAT recommended for files > 4GB) |
| Working Temperature | 0℃ ~ 60℃ |
| Storage Temperature | -25℃ ~ 80℃ |
| Compatibility | Windows, Centos7, Redhat7.5, Windows Server 2012/2016 |
| Certification | CE, FCC |
| Origin | Mainland China |
Figure 5: Detailed product parameters and dimensions.
User Tips
- Password Management: Always remember your password. There is no backdoor or recovery option if the password is forgotten, and data will be permanently lost upon reset.
- Data Backup: If you frequently make password entry mistakes, consider backing up your data regularly to prevent accidental data loss due to the automatic wipe function after 10 incorrect attempts.
- File System for Large Files: For optimal performance and to store files larger than 4GB, format the USB drive to EXFAT. The default FAT32 file system has a 4GB file size limitation.
- Charging for Standby: If the drive is left in standby for over a week or if the indicator lights do not respond, plug it into a computer for 1-2 hours to ensure it is adequately charged for operation.
Warranty and Support
For detailed warranty information and further support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download from the seller's website. Please note that the manufacturer cannot assist with password recovery or data retrieval if the password is forgotten.
For additional information, you may refer to the official user manual PDF: DM FD063 User Manual (PDF)